Document Detail

The bipolar assembly domain of the mitotic motor kinesin-5.
Jump to Full Text
MedLine Citation:
PMID:  23299893     Owner:  NLM     Status:  MEDLINE    
An outstanding unresolved question is how does the mitotic spindle utilize microtubules and mitotic motors to coordinate accurate chromosome segregation during mitosis? This process depends upon the mitotic motor, kinesin-5, whose unique bipolar architecture, with pairs of motor domains lying at opposite ends of a central rod, allows it to crosslink microtubules within the mitotic spindle and to coordinate their relative sliding during spindle assembly, maintenance and elongation. The structural basis of kinesin-5's bipolarity is, however, unknown, as protein asymmetry has so far precluded its crystallization. Here we use electron microscopy of single molecules of kinesin-5 and its subfragments, combined with hydrodynamic analysis plus mass spectrometry, circular dichroism and site-directed spin label electron paramagnetic resonance spectroscopy, to show how a staggered antiparallel coiled-coil 'BASS' (bipolar assembly) domain directs the assembly of four kinesin-5 polypeptides into bipolar minifilaments.
Seyda Acar; David B Carlson; Madhu S Budamagunta; Vladimir Yarov-Yarovoy; John J Correia; Milady R Niñonuevo; Weitao Jia; Li Tao; Julie A Leary; John C Voss; James E Evans; Jonathan M Scholey
Related Documents :
9461093 - In situ complement activation in porcine membranoproliferative glomerulonephritis type ii.
23299893 - The bipolar assembly domain of the mitotic motor kinesin-5.
24611523 - Observation of even denominator fractional quantum hall effect in suspended bilayer gra...
Publication Detail:
Type:  Journal Article; Research Support, American Recovery and Reinvestment Act; Research Support, N.I.H., Extramural; Research Support, Non-U.S. Gov't; Research Support, U.S. Gov't, Non-P.H.S.    
Journal Detail:
Title:  Nature communications     Volume:  4     ISSN:  2041-1723     ISO Abbreviation:  Nat Commun     Publication Date:  2013  
Date Detail:
Created Date:  2013-01-09     Completed Date:  2013-06-20     Revised Date:  2013-07-11    
Medline Journal Info:
Nlm Unique ID:  101528555     Medline TA:  Nat Commun     Country:  England    
Other Details:
Languages:  eng     Pagination:  1343     Citation Subset:  IM    
Department of Molecular and Cellular Biology, University of California, One Shields Avenue, Davis, California 95616, USA.
Export Citation:
APA/MLA Format     Download EndNote     Download BibTex
MeSH Terms
Cysteine / genetics
Drosophila Proteins / chemistry*,  metabolism*,  ultrastructure
Drosophila melanogaster / cytology*,  metabolism*
Electron Spin Resonance Spectroscopy
Mass Spectrometry
Microtubule-Associated Proteins / chemistry*,  metabolism*,  ultrastructure
Molecular Weight
Mutant Proteins / chemistry
Mutation / genetics
Nanoparticles / ultrastructure
Native Polyacrylamide Gel Electrophoresis
Protein Multimerization
Protein Structure, Tertiary
Structural Homology, Protein
Structure-Activity Relationship
Grant Support
Reg. No./Substance:
0/Drosophila Proteins; 0/Klp61F protein, Drosophila; 0/Microtubule-Associated Proteins; 0/Mutant Proteins; 52-90-4/Cysteine

From MEDLINE®/PubMed®, a database of the U.S. National Library of Medicine

Full Text
Journal Information
Journal ID (nlm-ta): Nat Commun
Journal ID (iso-abbrev): Nat Commun
ISSN: 2041-1723
Publisher: Nature Pub. Group
Article Information
Download PDF
Copyright © 2013, Nature Publishing Group, a division of Macmillan Publishers Limited. All Rights Reserved.
Received Day: 17 Month: 08 Year: 2012
Accepted Day: 30 Month: 11 Year: 2012
Electronic publication date: Day: 08 Month: 01 Year: 2013
Volume: 4First Page: 1343 Last Page:
PubMed Id: 23299893
ID: 3562449
Publisher Item Identifier: ncomms2348
DOI: 10.1038/ncomms2348

The bipolar assembly domain of the mitotic motor kinesin-5
Seyda Acar16
David B. Carlson16
Madhu S. Budamagunta2
Vladimir Yarov-Yarovoy23
John J. Correia4
Milady R. Niñonuevo1
Weitao Jia1
Li Tao1
Julie A. Leary1
John C. Voss2
James E. Evans15
Jonathan M. Scholeya1
1Department of Molecular and Cellular Biology, University of California, One Shields Avenue, Davis, California 95616, USA
2Department of Biochemistry and Molecular Medicine, University of California, One Shields Avenue, Davis, California 95616, USA
3Department of Physiology and Membrane Biology, University of California, One Shields Avenue, Davis, California 95616, USA
4Department of Biochemistry, University of Mississippi Medical Center, 2500 North State Street, Jackson, Mississippi 39216-4505, USA
5Present address: Pacific Northwest National Laboratory, Environmental Molecular Science Lab, Richland, Washington 99354, USA
6These authors contributed equally to this work

Accurate chromosome segregation during mitosis is known to underlie the propagation of all life on Earth1, 2. This process depends upon the action of a subcellular bipolar machine, the mitotic spindle, which uses dynamic microtubules (MTs) plus multiple kinesin and dynein motors to generate the piconewton-scale forces required for mitotic movements2, 3, 4. Of these, the MT-based motor kinesin-5 has a key role, being essential for the assembly of bipolar spindles in most eukaryotic cells and driving or constraining the rate of spindle elongation5, 6, 7, 8. Studies of a recombinant vertebrate kinesin-5 motor domain subfragment6 and a native kinesin-5 holoenzyme purified from Drosophila embryos9, 10, 11 suggest that kinesin-5 is a ‘slow’, plus-end-directed, bipolar, homotetrameric motor capable of using pairs of N-terminal motor domains at opposite ends of a central rod to crosslink MTs into bundles. Moreover, sophisticated motility assays reveal that single vertebrate12 and Drosophila13 kinesin-5 holoenzymes can crosslink and slide adjacent MTs, displaying a three-fold preference for MTs in the antiparallel versus the parallel orientation. Together, these data support the hypothesis that kinesin-5 functions via a ‘sliding filament’ mechanism, cross-linking adjacent MTs into bundles throughout the spindle, and exerting outward forces on antiparallel MTs to drive bipolar spindle assembly, poleward flux and anaphase B spindle elongation14, 15, 16. In this model, the assembly of four kinesin-5 polypeptides into a bipolar minifilament is crucial, but the molecular basis of this arrangement, which is unique among MT-based motor proteins, remains unclear.

This could be clarified by the determination of an improved, ideally atomic resolution understanding of kinesin-5’s structure, but in practice this proves to be difficult. So far, for example, we have failed to crystallize kinesin-5 for structure determination by X-ray diffraction, probably because of the molecule’s asymmetry. Therefore, we have adopted an alternative approach involving a combination of electron microscopy, hydrodynamic analysis and various spectroscopy procedures to obtain structural data on the BASS domain of this key mitotic motor.

The BASS domain directs bipolar homotetramer assembly

We examined the oligomeric state, ultrastructure and dimensions of baculovirus-expressed and purified Drosophila kinesin-5 (aka KLP61F) and several truncated mutants thereof using hydrodynamic analysis combined with electron microscopy (Figs 1, 2, 3; Table 1; Supplementary Fig. S1). We found that transmission electron microscope (TEM) and scanning TEM (STEM) of proteins that were negatively stained with uranyl formate (UF) immediately following gel filtration (Fig. 1) yielded high-quality images (Fig. 2). As each preparation contained a poly-histidine tag on either the N- or C-terminal end, the relative orientation of individual kinesin-5 subunits within these preparations could be determined by decoration with 2 and 5 nm Ni-NTA-nanogold particles before EM (Fig. 3).

Full-length (FL) and motorless (ML) kinesin-5 constructs are homotetrameric MT-cross-linking proteins13, 17. In the EM, undecorated FL-kinesin-5 molecules were observed to be 79 nm long dumbbell-shaped molecules, containing a central 57 nm long × 3.1 nm diameter rod, from which two distinct 8.1 × 5.5 nm globular domains emerged (Fig. 2, Supplementary Figs S1–S3). In favourable STEM images (for example, Fig. 2a, right hand panels) fine linkers appeared to attach the globular domains to the rod. Molecules tagged with poly-histidine on either the N-terminal motor domain or on the C-terminal tail were efficiently decorated on both ends with nanogold particles (Fig. 3, Supplementary Figs S1b and S3). ML-kinesin-5 consisted of bipolar filaments of the same diameter as the rod of FL-kinesin-5, but significantly longer (73.4 nm) and lacking globular domains at both ends (Figs 2 and 3; Supplementary Figs S1 and S4). These results confirm that kinesin-5 is bipolar with pairs of motor domains linked to a central rod. Moreover, the observation that ML-kinesin-5 is longer than the rod of FL-kinesin-5 suggests that, in the intact holoenzyme, the C-terminal tail domains may fold up to interact with the N-terminal motor domains, and this may have functional consequences (see Discussion).

In preliminary studies, we identified a region comprising residues 631–920 of the kinesin-5 rod as the shortest subfragment capable of assembling into homotetramers17 (Supplementary Fig. S1a). This subfragment, which for reasons described below we now refer to as the BASS domain, was highly purified (Fig. 1) and examined by EM where it was observed to comprise 32 nm long rods whose four subunits are arranged in an antiparallel fashion based on nanogold decoration (Figs 2 and 3, Supplementary Figs S1 and S6). To evaluate the role of this BASS domain in the assembly of four FL-kinesin-5 subunits into bipolar homotetramers, we engineered and purified two new deletion constructs, a ‘Bonsai’ construct (analogous to the Bonsai subfragment of the kinetochore protein, NDC80 (ref. 18)), which contains the BASS domain and motor domains but lacks the N-terminal half of the rod, and a BASS-Δ subfragment, which lacks the BASS domain but contains the entire remainder of the kinesin-5 polypeptide chain (Fig. 1; Supplementary Fig. S1). Remarkably, the Bonsai construct appeared to assemble into short, dumbbell-shaped bipolar homotetramers, 38 nm in length (although at low concentration, <1 mg ml−1, a small amount of dimeric Bonsai was also detected by gel filtration but was not studied further), whereas the BASS-Δ subfragment only formed monomers (Figs 1, 2, 3; Table 1; Supplementary Figs S1 and S5). Thus, we feel justified in referring to residues 631–920 as the BASS (for bipolar assembly) domain, because it is essential for bipolar homotetramer assembly— kinesin-5 and all subfragments that contain it assemble into bipolar homotetramers, whereas subfragments that lack it form monomers.

Fitting the BASS domain into the kinesin-5 rod

We initially hoped to use X-ray diffraction to directly determine the molecular mechanism by which the BASS domain specifies the unique bipolar architecture of kinesin-5, but in extensive robotic trials this elongated asymmetric molecule did not crystallize. Thus, instead, we tried to develop a simple model for how the 32 nm long BASS domain is arranged within a 57-nm long kinesin-5 rod domain.

The sequence of each 1,066 residue Drosophila kinesin-5 subunit predicts that it consists of globular motor and unstructured tail domains, separated by a 566 residue rod (residues 354–920)17, 19 (Supplementary Fig. S1). The rod domain is predicted to be 95–97% α-helical, including several coiled-coil (CC) segments interrupted by only 3–5% random coil breaks (using paircoil2 programme; Supplementary Fig. S8a). Thus, the above TEM data are consistent with four kinesin-5 subunits forming some kind of four-strand helical bundle. This line of reasoning led us to favour an antiparallel arrangement of two parallel CCs for the BASS domain, in which the N-terminal ends overlap to form an antiparallel 4-strand core, leaving single C-terminal CC overhangs at either end (Fig. 6) as in a vimentin tetramer20. Assuming 0.15 nm per residue, if residue 630 of one CC lies in register with residue 809 of its antiparallel neighbour, this arrangement would produce a structure that is predicted to be ≈60 nm long like the kinesin-5 rod. Such a BASS domain would fit the dimensions of the rod of FL-kinesin-5, but it is inconsistent with the smaller lengths of the 32 nm long BASS domain observed by EM (Figs 2 and 3 and Supplementary Fig. S1).

Actually, based on length considerations alone, a parallel arrangement of four polypeptide chains with residues from 354 to 920 lying in register all along the rod domain superficially gives a better fit to the data. This predicts an 85-nm rod for FL-kinesin-5, which is 49% longer that the 57 nm rod observed (Supplementary Fig. S1). This is reasonable given that similar arguments for kinesin-1 predict a rod that is 28% longer than that observed21, 22, 23. The BASS domain and Bonsai would have residues 354–630 deleted from the N-terminal ends of all four chains, producing a 43-nm long rod, which is more consistent with lengths of the 32 nm BASS domain and 38 nm Bonsai, but of course such a parallel arrangement cannot be reconciled with our current nanogold and previous IgG decoration. But adding to the puzzle, the 3 nm diameter of the negatively stained kinesin-5 rod observed by EM (Supplementary Fig. S1) lies within the range expected of a four helix bundle yet, according to at least one report, this is also the diameter of the negatively-stained class II myosin rod, which is a single parallel CC assembled from two, rather than four polypeptide chains24. These considerations made us wonder if some systematic experimental error in our analysis of kinesin-5’s architecture was misleading us, prompting us to further test and refine our antiparallel CC model for the kinesin-5 BASS domain.

Consolidating the homotetrameric state of the BASS domain

Our estimate of four subunits per kinesin-5 (refs 9,17) (Fig. 1, Table 1) could be compromised by the high Stokes radius of FL-kinesin-5, which causes it to elute from gel filtration columns in a position that is hard to calibrate. This is less of a concern for the smaller BASS domain, which by analytical ultracentrifugation (AUC)25 displayed an S-value of between 3.5 and 4S (extrapolated to zero concentration), in very good agreement with the value of 3.9S estimated using routine sucrose density gradient centrifugation (Supplementary Fig. S7). However, even this relatively small subfragment can display non-ideal behaviour when migrating in a centrifugal field due to: (i) its high charge and (ii) its high frictional ratio (f/f0=2.6) reflecting an asymmetric, elongated shape, consistent with EM (Figs 2 and 3). Both these effects give rise to a hyper-sharpening of the sedimenting protein boundary, which impedes accurate determination of the diffusion coefficient for direct MW determination by AUC.

Mass spectrometry was used to further test the oligomeric state of the BASS domain (Fig. 4a). Under denaturing conditions, a single kinesin-5 subunit displayed MW=34,535.5 Da. Mass spectra obtained under non denaturing conditions yielded ions with masses virtually identical to the theoretical values for the monomer (34,534.9 Da versus 34,629.9 Da; 0.28% error) as well as for corresponding dimers (69,069.9 Da versus 69,356.3 Da; 0.41% error); and tetramers (138,139.8 Da versus 138,974 Da; 0.6% error). We also detected a BASS-dimer that was contaminated with the chaperone HSP70, albeit at a very low level assuming equal ionization efficiency. Also, as the small species’ were not detected in routine hydrodynamic analyses (Fig. 1; Table 1), it seems reasonable to propose that the BASS domain is a tetramer that dissociates into dimer and monomer under the conditions used for MS.

We also used a 3rd method, native PAGE, in which the BASS domain migrates under the influence of an electric, rather than a centrifugal, field (Fig. 4b). We estimated the BASS domain’s molecular weight using Ferguson plots26 to be 153±16 kD based on three independent sets of experiments, again highly consistent with it being a tetramer and supporting the results of hydrodynamic analyses (Table 1). No dimeric or monomeric species’ were detected, although a very small amount of aggregated protein (<10% by mass) was detected at high crosslinker percentages. Thus, we feel confident that the BASS domain of kinesin-5 is a homotetramer.

EPR spectroscopy of the BASS domain

The possibility that some of the predicted CC segments within the kinesin-5 rod domain, described above, do not reflect the true structure of this region of the molecule is underscored by our observation that the BASS-Δ subfragment is monomeric. This raises the possibility that the predicted CCs seen in regions of the rod lying outside the BASS domain17, are in fact single alpha helical or disordered domains like those seen in some myosins27. Therefore, based on elegant studies of vimentin28, we decided to use site-directed spin labelling and electron paramagnetic resonance (SDSL-EPR) spectroscopy and homology modelling to test the CC predictions and to investigate sites of interaction between side chains of adjacent CCs within the BASS domain.

For SDSL-EPR, we created 118 spin-labelled mutants spanning four regions, that is, region 1=aa 642–671; 2=700–719; 3=776–835; 4=852–859 (Supplementary Fig. S8a,b) that represent 40% of the BASS domain. This was done using a mutant BASS domain, BASS-NoC, in which all Cys residues were changed by site-directed mutagenesis to Ser, as a template for creating these single Cys mutants. All 118 mutants were spin-labelled with S-(2,2,5,5-tetramethyl-2,5-dihydro-1H-pyrrol-3-yl)methyl methane sulfonothioate, (MTSL) and examined by EPR. Our aim was to verify residues in the ‘a’ and ‘d’ positions of the CC heptad repeat (a–g) as these positions appear uniquely in a series within two parallel strands of a single CC. Thus, spin labels placed on ‘a’ and ‘d’ side chains are closely packed in the hydrophobic core of the CC and are thereby strongly immobilized and magnetically coupled, giving rise to a shallow EPR spectrum characterized by broad peaks. As a control, SDS-induced denaturation disrupts these interactions, producing a sharper spectrum (tight peaks) indicating a mobile spin label.

Two examples are shown in Fig. 5, which identifies residues 657–671 in region 1 (Fig. 5a) and 776–788 in region 3 (Fig. 5b) as likely CCs, where the spin-labelled hydrophobic residues in the ‘a’ and ‘d’ positions yielded the expected ‘shallow’ EPR spectrum. In contrast to aas 776–788, residues 796–835 in region 3 did not yield evidence of a CC. Overall aas 657–671 appear more rigid than aas 776–788. EPR spectra for aas 708–719 in region 2 also verified interactions between residues in the a and d positions, but region 4 appears disordered throughout.

These data were used to refine the antiparallel CC model for the BASS domain. In a search using Rosetta software, the protein structure displaying the greatest homology with the BASS domain was the classic CC protein, tropomyosin29 (20% match). The CC structure predicted from this ‘hit’ was refined according to the constraints of the CCs determined by the EPR data and assembled into a staggered antiparallel CC based on the aforementioned biochemical and EM data. The resulting antiparallel tetramer model was further tested using two sets of single and double mutants that form tetramers based on hydrodynamic analysis (Fig. 7). The first of these contain Cys at residues 671 (position g) and 791 (position b), which are predicted to be juxtaposed within neighbouring antiparallel CCs in the model. Single mutants in which either one of these Cys residues is spin-labelled with MTSL display sharp peaks in EPR spectra (Fig. 7a inset). However, in double mutants, when both these positions are spin-labelled, their EPR spectra reveal evidence of strong interactions (spins are <1.5 nm apart), giving rise to peak broadening in the spectrum (compare black and red lines in Fig. 7a; left spectra). If the BASS domain consisted of a pair of parallel, in register CCs derived from the kinesin-5 rod mentioned above, these residues would be 18 nm apart and their spin labels could not interact in this way. Identical experiments performed with mutants containing Cys residues at positions 671 and 788 (only three residues upstream of 791) provided no evidence of interaction (data not shown).

This analysis yielded a model for the BASS domain in which the tetrameric antiparallel overlap zone has N-terminal residue 630 of one CC lying in register with residue 835 of its antiparallel partner, leaving residues 835–920 to form 85 residue single parallel CC overhangs at both ends (Fig. 6a). It is striking that the three CCs verified by SDSL-EPR spectroscopy all lie within the central overlap zone, yet aas 852–859 lying within the overhangs, which displays a high probability of CC formation based on sequence analysis, is unlikely to form a CC based on the EPR analysis (Fig. 6b). Moreover, CD spectroscopy of the BASS domain yields a classic α-helical spectrum with minima at wavelengths of 208 and 222 nm (Supplementary Fig. S8c), but when these data were quantified30 we estimated that the BASS domain was only 50% α-helical (on average 48.8±1.5% α helix, 6.7±1.6% β-sheet, 14.0±1.9% turn and 30.5±1.2% random coil). Based on these data we propose that within the purified BASS domain protein, the overhangs become disordered, reducing the overall CC and single alpha helical content of the protein, and rendering the overhangs invisible by electron microscopy. This is consistent with the superposition of the BASS domain model onto STEM images, where only the central overlap zone is visible (Fig. 6c, right hand panels).

We reasoned that deletion of the 85 aa C-terminal overhangs might yield a smaller tetrameric ‘core’ and this was tested biochemically by expression and purification of BASS-core (BASS 631–835), which does indeed behave as a stable homotetramer in hydrodynamic analysis, yielding a monodisperse peak in gel filtration in support of the model (Fig. 7b, Table 1; although under conditions used for EM, this fragment tended to aggregate so it has not been further analysed). In contrast, deletion of 120 residues from the C-terminus yielded an unstable core (BASS 631–790) that formed both tetramers and dimers under the same conditions (Fig. 7b).


In the almost two decades since the bipolar, homotetrameric structure was proposed for the mitotic motor, kinesin-5 (refs 9,10), progress has been made in the structural analysis of its motor domain31, 32 but very little has been learned about how it adopts its unique architecture. Thus, the most significant advance of the current study is in providing an advance in that direction, by suggesting how the BASS domain of kinesin-5 can specify how its four subunits assemble into this bipolar organization, which is thought to underlie the sliding filament mechanism by which kinesin-5 functions during mitosis.

The idea that the BASS domain forms a four-strand bundle consisting of two antiparallel CC, superficially resembling a vimentin tetramer, is supported by sequence analysis, EM, mass spectrometry, hydrodynamics, native PAGE and site-directed spin label EPR spectroscopy. The results are all incorporated into the summary showing the homology model (Fig. 6a) superimposed on STEM images of single molecules of FL-kinesin-5 (left) and the BASS domain (right), decorated on their N-termini with 2 nm Nanogold (Fig. 6c). The BASS domain forms a structure that fits very well into the four-strand antiparallel α-helical CC rod of the FL-kinesin-5 homotetramer, but in the EM, the α-helical C-terminal overhangs are apparently not resolved (discussed below). A rigorous test of this model versus alternative 4-strand helical bundle motifs would benefit from an atomic structure. For this it is conceivable that the tetrameric BASS-core, identified herein via predictions based on the BASS domain model, might be a useful target for crystallization. However, the BASS-core displays evidence of instability and under conditions used for EM it tended to form aggregates. Thus, we feel more work must be done to better stabilize this protein in its tetrameric state, before undertaking such detailed structural studies.

Previously, we reported that native kinesin-5 purified from Drosphila embryos and examined by rotary shadow EM displayed overall length=96 nm (versus 79 nm herein) with a 61 nm rod (versus 57 nm herein). Moreover, in that study the motor and tail domains appeared collapsed into a single 22 nm globular domain and bipolarity was inferred based on 46 of 70 molecules being decorated on both ends by motor domain-specific IgG10. In the current study, the higher yield of purified baculovirus-expressed motor combined with the use of superior UF-negative staining allowed >10-fold more decorated and undecorated molecules, manipulated in various ways, to be examined (for example, for FL-kinesin-5; 530 of 663 molecules were decorated on both ends) and the motor domains could be clearly resolved in favourable images (Fig. 2; Supplementary Fig. S1). The revised dimensions and constructs reported here may prove useful for advancing our understanding of kinesin-5 structure and function in the spindle by EM. For example, experiments are in progress to test the prediction that functionally replacing the native KLP61F gene with the gene expressing the Bonsai construct will decrease the length of putative kinesin-5 crossbridges between MTs in embryo mitotic spindles from 60 to 30 nm (ref. 33).

One unresolved question is why the C-terminal overhangs are not visible in EM images of the BASS domain, where one might expect them to project as single CC rods from the tetrameric BASS-core, and of the Bonsai construct, where they might extend beyond the motor domains on the N-terminal end of the antiparallel neighbouring CCs (Fig. 6). The EM techniques we use should resolve single CCs, so we suspect that, following BASS domain purification, in the absence of their antiparallel neighbour, these overhangs become unstable, disordered and splay apart, making them difficult to visualize by TEM. This speculation is supported by analysis of the purified BASS domain by CD spectroscopy, which yields only 50% α-helix and by SDSL-EPR spectroscopy which fails to detect the predicted CC segments in the overhangs. It is possible that the CD spectrum could underestimate the true α-helical content of the purified BASS domain, much like the kinesin-1 rod, which is estimated to be 65–70% α-helical by CD spectroscopy at physiological temperatures, but is predicted to be 90% α-helix based on sequence analysis23. However, this would not be inconsistent with our proposal that the rod of full-length kinesin-5 is largely an alpha helical, antiparallel CC rod, whose CC conformation is preserved in the overlap zone of the BASS domain following its purification (Fig. 6), but not in the overhangs, which become disordered, accounting for the CD, EPR and EM data. In the case of Bonsai, the overhangs also contain the C-terminal tail domain, which we suspect interact with the antiparallel CC’s N-terminal heads, further obscuring their visualization.

Indeed, interactions between the C-terminal tails on one CC with the N-terminal heads on the neighbouring CC at each end of the FL-kinesin-5 could explain the curious observation that the tail domains of kinesin-5 are required for MT–MT-cross-linking and sliding by kinesin-5 (ref. 34). As the tail domains appear to have MT-binding activity35, one explanation for this result is that the kinesin-5 subunits are arranged in parallel and crosslink and slide MTs using a similar geometry to kinesin-1 and kinesin-14 (refs 36,37), but a head-tail interaction within the kinesin-5 homotetramer suggests that the tails could mediate an allosteric activation of MT binding by the heads instead34. As a precedent, head-tail interactions are well established in the case of the better characterized kinesin-1 (ref. 38). By EM, the ML-kinesin-5 tetramer is much longer than the rod of FL-kinesin-5, again consistent with the idea that the tail may fold up as a result of its interactions with the motor domain, and the idea that this may have a stabilizing effect is supported by our inability to purify and characterize the ‘tailless’ kinesin-5 complex (this report)13.

Although this study provides strong support for the bipolar, homotetrameric architecture of kinesin-5 by providing a structural explanation for the organization of the BASS domain, it is important to notice that we also detected other oligomeric states of kinesin-5 and its subfragments in some experiments. For example, the BASS-Δ subfragment only formed monomers, whereas monomer, dimer and tetramer forms of the BASS domain were detected by MS, and in routine hydrodynamic analyses we found some BASS domain dimers co-existing with tetramers. By EM a significant fraction (20% or less) of mono- or un-decorated molecules are seen. Also, in native PAGE and AUC, 2–3% higher order aggregates were detected. Although it is plausible that these are experimental artifacts, it is also possible that they represent functionally distinct oligomeric states that merit further investigation. For example, the formation of higher order filaments analogous to muscle thick filaments might be relevant to the proposal that kinesin-5 acts in concert with a ‘spindle matrix’6, 39 and dimeric or monomeric kinesin-5 could mediate chromosome congression,40 or contribute to protein synthesis on the ribosome41 processes for which the functional advantage of a bipolar homotetrameric architecture is not obvious.

In summary, this paper reports a major advance in our understanding of how kinesin-5 acquires its unique bipolar architecture. Thus, it represents a significant advance towards the ultimate goal of an atomic resolution understanding of the kinesin-5-dependent sliding filament mechanism that is proposed to underlie key aspects of mitosis and chromosome segregation, processes that are crucial to the formation and maintenance of all known living organisms.

Purification of proteins

In order to facilitate the purification of the proteins expressed from cloned genes (see Supplementary Methods) they were 6 × His-tagged either on C- or N-terminal ends. The expression of proteins was done in baculovirus system using SF9 cells as host cells17. After 2 days of infection with the corresponding bacmid the cells are harvested by centrifugation. The cell pellet is either used immediately for purification or kept at −80 °C until use. The cell pellet from a 400-ml cell culture is resuspended in 40 ml of Lysis buffer (10 mM Tris–HCl pH 8.0 containing 300 mM KCl, 20 mM Imidazole, 0.2 mM MgCl2, 1 mM PMSF, 1 μg ml−1 pepstatin, 1 μg ml−1 leupeptin, 2 μg ml−1 aprotinin, 20 μg ml−1 benzamidine and 40 μg ml−1 Nα-p-Tosyl-L-arginine methyl ester hydrochloride (TAME)). The lysate was then centrifuged at 37,000 r.p.m. in a Beckman Ultracentrifuge in JS 40.2Ti type rotor. The supernatant was applied to Ni-NTA beads (1.5 ml beads for each batch of SF9 cells from 400 ml culture). The samples from Ni-NTA affinity chromatography were applied to Superose6 GL10/30 gel filtration column. The fractions containing the proteins were analysed by SDS–PAGE and Coomassie Blue staining.

EM sample preparation

Fresh protein directly from gel filtration was diluted to 2.5 μg ml−1 for full-length and ML constructs or 5 μg ml−1 for the BASS domain with Buffer L. Two microliter of diluted protein was added to a glow discharged holey carbon double film (Cu-400HD, Pacific Grid-Tech), allowed to adsorb for 10 s, washed two times with 40 μl drops of Buffer L with no ATP, then two times with 40 μl drops of water and finally stained with two 40 μl drops of freshly made 0.75% UF42 before air drying. For gold decorated protein, 1.8 and 5 nm Ni-NTA-Nanogold (Nanoprobes, Inc.) was added to the protein in a molar ratio of 3:1 (ref. 43). In order to reduce aggregation caused by the gold cross-linking multiple motors, the gold was added to dilute protein and immediately mixed with three 0.5 s vortex pulses. The reaction was then placed on ice for 15 min and subsequently applied to EM grids as described above.

Electron microscopy

TEM images were taken on a JEM-2100F TEM (JEOL, Japan) operated at 200 KeV. Micrographs were recorded at a nominal magnification of X50,000 with a 4,096 × 4,096 pixel CCD camera (TVIPS, Gauting, Germany) at 700–1,000 nm defocus yielding an effective pixel size of 2 Å. STEM: high angle annular dark field STEM images were captured on a JEM-2100F/Cs (JEOL) dedicated STEM with aberration correction. The probe size was set at 6c with a camera length of 12 cm and a beam current of 0.4 nA. Areas were scanned at X250,000 magnification and 4,096 × 4,096 pixels yielding a resolution of 2.2 angstroms per pixel. Both STEM and TEM images were analysed using ImageJ ( and lengths were recorded using the measuring tool. Total length was determined by tracing the proteins longest path.

Hydrodynamic analysis

S-value determinations were done using 5–20% sucrose density gradients in a volume of 12 ml. Protein samples at 0.1–0.3 mg were loaded into each tube. The standards used were all supplied from Sigma; cytochrome c, carbonic anhydrase, bovine serum albumin, β amylase, apoferritin, thyroglobulin. Centrifugation was carried out at 40,000 rpm at 4 °C for 20 h in a Beckman Ultracentrifuge in SW41Ti type rotor. Fractions of 250 μl were collected after the run. Each fraction was run on 10% SDS–PAGE and stained by Coomassie blue. The standard curves were drawn using the known S-values of the standard proteins and S-value of the unknown sample was calculated from this curve. For calculation of Stoke’s radius gel filtration chromatography was done using Superose6 GL10/30 column using protein standards. The molecular weight was then calculated using Siegel–Monty equation by using the Stoke’s radius and S-value found by these methods9.

Native PAGE analysis

Native PAGE was performed at eight different acrylamide concentrations for purified BASS (5 μg protein loaded into each lane) along with all the standards. Ferguson plots shows the relationship between relative mobility of BASS domain and acrylamide concentration and were drawn as semi logarithmic graph of 100 × log(100 × Rf) versus %T. The relationship between Kr values determined for each standard protein and corresponding molecular weights were plotted in a logarithmic scale as a standard curve. Eight different standard proteins were analysed as was done for BASS. The standard proteins numbered as in Fig. 4c inset are (1) lactalbumin (14.2 kDa), (2) carbonic anhydrase (29 kDa), (3) chicken egg albumin (45 kDa), (4) BSA monomer, (5) BSA dimer, (6) catalase (250 kDa), (7) Urease trimer (272 kDa), (8) thyroglobulin dimer (330 kDa) and (9) thyroglobulin tetramer (660 kDa). The MW of BASS (and positive control fibrinogen) was calculated from this standard curve.

Analytical ultracentrifugation

All AUC measurements were performed in the UMC AUC facility in a Beckman Optima XLA analytical ultracentrifuge equipped with absorbance optics and an An60 Ti rotor. Sedimentation velocity data were collected at 50 K rpm, 20 °C at a wavelength of 280 nm using a spacing of 0.002 cm with one flash at each point in continuous scan mode.

All sedimentation velocity data were initially analysed by DCDT+(version 1.15) to produce g(s) distribution plots. The weight average sedimentation coefficient values were obtained from DCDT+ and corrected to S20,w for the solution density and viscosity44. The density for each buffer was measured using an Anton Paar DMA 5000 density metre.

CD spectral analysis

All CD measurements were made on a Jasco J720 (We thank Wolfgang Kramer at Millsaps College for access to the CD instrument) at room temperature in a 0.2-mm path cell. Samples were diluted to appropriate concentrations and prespun in a TL 100 (TLA 100.2) at 100 K rpm for 5 min to remove aggregates, which otherwise cause significant variation in the signal intensity, especially at low I. Spectra on proteins and buffer were collected in triplicate from 260 to 190 nm for buffer correction.

Mass spectral analysis

Mass Spectrometric analyses of intact BASS were performed using a T-wave ion mobility mass spectrometry system, SYNAPT G2 HDMS (Waters Corp., Milford, MA) equipped with a nano-electrospray source. Under denaturing conditions, the protein was desalted using C4 Ziptip (EMD Millipore, Billerica, MA) and eluted into 50% acetonitrile/50% water/0.1% formic acid. Under native-like conditions, the protein was buffer-exchanged into 200 mM ammonium acetate (pH 6.8) using micro Bio-Spin P-6 columns (Bio-Rad, Hercules, CA) before mass spectrometric analysis. For each analysis, a 3–6 μl aliquot of the protein solution was loaded onto custom-made borosilicate glass nanotips. The acquisition parameters were adjusted to maintain the native state of ions without compromising the transmission efficiency and mass accuracy. Mass spectra were processed by MassLynx V4.1 (Waters Corp., Milford, MA).

Site-directed spin labelling of BASS domain of kinesin-5 and EPR analysis

The samples that were prepared for EPR analysis did not contain any DTT or β-mercaptoethanol in any of the buffer used. Instead tris(2-carboxyethyl)phosphine was used at a final concentration of 100 μM. The samples at protein concentrations between 1–2 mg ml−1 were labelled with MTSL (dissolved in acetonitrile and added to a final concentration of 300 μM). The excess spin label was removed by using Bio-Spin 6 Tris columns from Bio-Rad. An aliquot of purified, spin-labelled protein (5 μl) at a final concentration of ~100 μM protein was placed in a sealed quartz capillary contained in the resonator. Spectra of samples at room temperature (20–22 °C) were obtained by a single 60-s scan over 100 G at a microwave power of 2 milliwatts and a modulation amplitude optimized to the natural line width of 1 G. The protein concentration was determined by Bradford’s assay again for the analysed sample and this value was used for normalization of the EPR data.

Rosetta modelling of kinesin-5

Homology and full atom modelling of Kinesin-5 was performed using the Rosetta homology45, 46 methods and X-ray structure of porcine cardiac tropomyosin (pdb id: 1C1G)47 was used as a template. Chains A and B of BASS (residues 633–913 of full-length Kinesin-5) were modelled based on chains A and B (residues 2–282) of porcine cardiac tropomyosin, respectively. Ten thousand models of A and B chain complex were generated followed by model clustering as described previously48. The centre of the largest cluster model was selected as the best model. Dimer of dimers model was constructed manually using UCSF Chimera program49 based on the EPR data suggesting proximity between residues 671 and 791 between dimers.

Author contributions

All the authors contributed to the extensive scientific discussions associated with this project, and read and edited the paper. S.A. performed virtually all the molecular biology, protein biochemistry, hydrodynamic analysis, native PAGE and site-directed spin-label mutagenesis involved in producing kinesin-5 and its subfragments in defined oligomeric states. She compiled the first outline of the results based on data and conclusions provided by all the co-authors. D.B.C., with advice from J.E.E., developed, performed and analysed E.M. experiments and some of the protein purification for E.M. L.T. taught the baculovirus expression/protein purification methods to S.A. and D.C., M.S.B. and J.C.V. designed, executed and interpreted the results of the SDSL-EPR experiments. M.R.N., W.J. and J.A.L. designed, executed and interpreted the M.S. experiments. V.Y.-Y. performed the homology modelling. J.J.C. designed, executed and interpreted the A.U.C. and C.D. experiments. J.M.S. is the P.I. of the laboratory and grant that support this project, he initiated, discussed and coordinated the overall direction of the project and wrote the first draft of the paper based on the outline of results compiled by S.A.

Additional information

How to cite this article: Acar, S. et al. The bipolar assembly domain of the mitotic motor kinesin-5. Nat. Commun. 4:1343 doi: 10.1038/ncomms2348 (2013).

Supplementary Material Supplementary Information

Supplementary Figures S1-S8 and Supplementary Methods

The overall project was supported by NIH grant no. GM55507 to J.M.S. Additional support came from NIH grants R01 AG029246 to J.C.V.; 5RC1GM091755 to J.E.E.; Funds from the UCD OVCR to J.A.L. and N.S.F. ARRA grant no. 1040372 to J.C.C. We thank members of the Scholey lab and many colleagues, especially Professors Jawdat Al-Bassam and Andy Fisher, for critical discussion and Steve Martin for assistance with the CD analysis and providing the software packages.

Gerdes K.,, Howard M.,, Szardenings F.,Pushing and pulling in prokaryotic DNA segregation. Cell141, 927–942 (Year: 2010).20550930
Walczak C. E.,, Cai S.,, Khodjakov A.,Mechanisms of chromosome behaviour during mitosis. Nat. Rev. Mol. Cell Biol.11, 91–102 (Year: 2010).20068571
Sharp D. J.,, Rogers G. C.,, Scholey J. M.,Microtubule motors in mitosis. Nature407, 41–47 (Year: 2000).10993066
McIntosh J. R.,, Molodtsov M. I.,, Ataullakhanov F. I.,Biophysics of mitosis. Q Rev. Biophys.45, 147–207 (Year: 2012).22321376
Enos A. P.,, Morris N. R.,Mutation of a gene that encodes a kinesin-like protein blocks nuclear division in A. nidulans. Cell60, 1019–1027 (Year: 1990).2138511
Sawin K. E.,, LeGuellec K.,, Philippe M.,, Mitchison T. J.,Mitotic spindle organization by a plus-end-directed microtubule motor. Nature359, 540–543 (Year: 1992).1406972
Brust-Mascher I.,, Sommi P.,, Cheerambathur D. K.,, Scholey J. M.,Kinesin-5-dependent poleward flux and spindle length control in Drosophila embryo mitosis. Mol. Biol. Cell20, 1749–1762 (Year: 2009).19158379
Saunders A. M.,, Powers J.,, Strome S.,, Saxton W. M.,Kinesin-5 acts as a brake in anaphase spindle elongation. Curr. Biol.17, R453–R454 (Year: 2007).17580072
Cole D. G.,, Saxton W. M.,, Sheehan K. B.,, Scholey J. M.,A ‘slow’ homotetrameric kinesin-related motor protein purified from Drosophila embryos. J. Biol. Chem.269, 22913–22916 (Year: 1994).8083185
Kashina A. S.,et al. . A bipolar kinesin. Nature379, 270–272 (Year: 1996).8538794
Kashina A. S.,, Scholey J. M.,, Leszyk J. D.,, Saxton W. M.,An essential bipolar mitotic motor. Nature384, 225 (Year: 1996).8918872
Kapitein L. C.,et al. . The bipolar mitotic kinesin Eg5 moves on both microtubules that it crosslinks. Nature435, 114–118 (Year: 2005).15875026
van den Wildenberg S. M.,et al. . The homotetrameric kinesin-5 KLP61F preferentially crosslinks microtubules into antiparallel orientations. Curr. Biol.18, 1860–1864 (Year: 2008).19062285
Kaseda K.,, McAinsh A. D.,, Cross R. A.,Walking, hopping, diffusing and braking modes of kinesin-5. Biochem. Soc. Trans.37, 1045–1049 (Year: 2009).19754449
Valentine M. T.,, Fordyce P. M.,, Block S. M.,Eg5 steps it up!. Cell Div.1, 31–38 (Year: 2006).17173688
Scholey J. M.,Kinesin-5 in Drosophila embryo mitosis: sliding filament or spindle matrix mechanism?Cell Motil. Cytoskeleton66, 500–508 (Year: 2009).19291760
Tao L.,et al. . A homotetrameric kinesin-5, KLP61F, bundles microtubules and antagonizes Ncd in motility assays. Curr. Biol.16, 2293–2302 (Year: 2006).17141610
Ciferri C.,et al. . Implications for kinetochore-microtubule attachment from the structure of an engineered Ndc80 complex. Cell133, 427–439 (Year: 2008).18455984
Heck M. M.,et al. . The kinesin-like protein KLP61F is essential for mitosis in Drosophila. J. Cell Biol.123, 665–679 (Year: 1993).8227131
Strelkov S. V.,, Herrmann H.,, Aebi U.,Molecular architecture of intermediate filaments. BioEssays25, 243–251 (Year: 2003).12596228
Scholey J. M.,, Heuser J.,, Yang J. T.,, Goldstein L. S.,Identification of globular mechanochemical heads of kinesin. Nature338, 355–357 (Year: 1989).2493586
Hirokawa N.,et al. . Submolecular domains of bovine brain kinesin identified by electron microscopy and monoclonal antibody decoration. Cell56, 867–878 (Year: 1989).2522351
de Cuevas M.,, Tao T.,, Goldstein L. S.,Evidence that the stalk of Drosophila kinesin heavy chain is an alpha-helical coiled coil. J. Cell Biol.116, 957–965 (Year: 1992).1734025
Takahashi K.,Topography of the myosin molecule as visualized by an improved negative staining method. J. Biochem.83, 905–908 (Year: 1978).641037
Stafford W. F.,, Sherwood P. J.,Analysis of heterologous interacting systems by sedimentation velocity: curve fitting algorithms for estimation of sedimentation coefficients, equilibrium and kinetic constants. Biophys. Chem.108, 231–243 (Year: 2004).15043932
Hedrick J. L.,, Smith A. J.,Size and charge isomer separation and estimation of molecular weights of proteins by disc gel electrophoresis. Arch. Biochem. Biophys.126, 155–164 (Year: 1968).5671059
Peckham M.,Coiled coils and SAH domains in cytoskeletal molecular motors. Biochem. Soc. Trans.39, 1142–1148 (Year: 2011).21936779
Hess J. F.,, Budamagunta M. S.,, Voss J. C.,, FitzGerald P. G.,Structural characterization of human vimentin rod 1 and the sequencing of assembly steps in intermediate filament formation in vitro using site-directed spin labeling and electron paramagnetic resonance. J. Biol. Chem.279, 44841–44846 (Year: 2004).15231822
Crick F. H.,The packing of alpha helices: simple coiled coils. Acta Crystallogr.6, 689–697 (Year: 1953).
Martin S. R.,, Schilstra M. J.,Circular dichroism and its application to the study of biomolecules. Methods Cell Biol.84, 263–293 (Year: 2008).17964935
Bodey A. J.,, Kikkawa M.,, Moores C. A.,9-Angstrom structure of a microtubule-bound mitotic motor. J. Mol. Biol.388, 218–224 (Year: 2009).19285086
Turner J.,et al. . Crystal structure of the mitotic spindle kinesin Eg5 reveals a novel conformation of the neck-linker. J. Biol. Chem.276, 25496–25502 (Year: 2001).11328809
Sharp D. J.,et al. . The bipolar kinesin, KLP61F, cross-links microtubules within interpolar microtubule bundles of Drosophila embryonic mitotic spindles. J. Cell Biol.144, 125–138 (Year: 1999).9885249
Weinger J. S.,, Qiu M.,, Yang G.,, Kapoor T. M.,A nonmotor microtubule binding site in kinesin-5 is required for filament crosslinking and sliding. Curr. Biol.21, 154–160 (Year: 2011).21236672
Amos L.,Spindle assembly: kinesin-5 is in control. Curr. Biol.18, R1146–R1149 (Year: 2008).19108775
Jolly A. L.,et al. . Kinesin-1 heavy chain mediates microtubule sliding to drive changes in cell shape. Proc. Natl Acad. Sci. USA107, 12151–12156 (Year: 2010).20566873
Fink G.,et al. . The mitotic kinesin-14 Ncd drives directional microtubule-microtubule sliding. Nat. Cell Biol.11, 717–723 (Year: 2009).19430467
Kaan H. Y.,, Hackney D. D.,, Kozielski F.,The structure of the kinesin-1 motor-tail complex reveals the mechanism of autoinhibition. Science333, 883–885 (Year: 2011).21836017
Kapoor T. M.,, Mitchison T. J.,Eg5 is static in bipolar spindles relative to tubulin: evidence for a static spindle matrix. J. Cell Biol.154, 1125–1133 (Year: 2001).11564753
Gardner M. K.,et al. . Chromosome congression by kinesin-5 motor-mediated disassembly of longer kinetochore microtubules. Cell135, 894–906 (Year: 2008).19041752
Bartoli K. M.,, Jakovljevic J.,, Woolford J. L. Jr,, Saunders W. S.,Kinesin molecular motor Eg5 functions during polypeptide synthesis. Mol. Biol. Cell22, 3420–3430 (Year: 2011).21795388
Ohi M.,, Li Y.,, Cheng Y.,, Walz T.,Negative staining and image classification—powerful tools in modern electron microscopy. Biol. Proced. Online6, 23–34 (Year: 2004).15103397
Hainfeld J. F.,, Liu W.,, Halsey C. M.,, Freimuth P.,, Powell R. D.,Ni-NTA-gold clusters target His-tagged proteins. J. Struct. Biol.127, 185–198 (Year: 1999).10527908
Philo J. S.,Improved methods for fitting sedimentation coefficient distributions derived by time-derivative techniques. Anal. Biochem.354, 238–246 (Year: 2006).16730633
Rohl C. A.,, Strauss C. E.,, Chivian D.,, Baker D.,Modeling structurally variable regions in homologous proteins with rosetta. Proteins55, 656–677 (Year: 2004).15103629
Wang C.,, Bradley P.,, Baker D.,Protein-protein docking with backbone flexibility. J. Mol. Biol.373, 503–519 (Year: 2007).17825317
Whitby F. G.,, Phillips G. N. Jr,Crystal structure of tropomyosin at 7 Angstroms resolution. Proteins38, 49–59 (Year: 2000).10651038
Bonneau R.,, Strauss C. E.,, Baker D.,Improving the performance of Rosetta using multiple sequence alignment information and global measures of hydrophobic core formation. Proteins43, 1–11 (Year: 2001).11170209
Pettersen E. F.,et al. . UCSF Chimera—a visualization system for exploratory research and analysis. J. Comput. Chem.25, 1605–1612 (Year: 2004).15264254

Article Categories:
  • Article

Previous Document:  Functional genomics identifies type I interferon pathway as central for host defense against Candida...
Next Document:  Hydrogen bond-promoted metallic state in a purely organic single-component conductor under pressure.