|Optimized labeling of NOTA-conjugated octreotide with F-18.|
|Jump to Full Text|
|PMID: 22009690 Owner: NLM Status: Publisher|
|We recently reported a facile method based on the chelation of [(18)F]aluminum fluoride (Al(18)F) by NOTA (1,4,7-triazacyclononane-1,4,7-triacetic acid). Here, we present a further optimization of the (18)F labeling of NOTA-octreotide (IMP466). Octreotide was conjugated with the NOTA chelate and was labeled with (18)F in a two-step, one-pot method. The labeling procedure was optimized with regard to the labeling buffer, ionic strength, peptide concentration, and temperature. Radiochemical yield, specific activity, in vitro stability, and receptor affinity were determined. Biodistribution of (18)F-IMP466 was studied in AR42J tumor-bearing mice. In addition, microPET/CT images were acquired. IMP466 was labeled with Al(18)F in a single step with 97% yield in the presence of 80% (v/v) acetonitrile or ethanol. The labeled product was purified by HPLC to remove unlabeled peptide and unbound Al(18)F. The radiolabeling, including purification, was performed for 45 min. Specific activities of 48,000 GBq/mmol could be obtained. (18)F-IMP466 showed a high tumor uptake and excellent tumor-to-blood ratios at 2 h post-injection. In addition, the low bone uptake indicated that the Al(18)F-NOTA complex was stable in vivo. PET/CT scans revealed excellent tumor delineation and specific accumulation in the tumor. Uptake in receptor-negative organs was low. NOTA-octreotide could be labeled with (18)F in quantitative yields using a rapid two-step, one-pot, method. The compound was stable in vivo and showed rapid accretion in SSTR(2)-receptor-expressing AR42J tumors in nude mice. This method can be used to label other NOTA-conjugated compounds such as RGD peptides, GRPR-binding peptides, and Affibody molecules with (18)F.|
|Peter Laverman; Christopher A D'Souza; Annemarie Eek; William J McBride; Robert M Sharkey; Wim J G Oyen; David M Goldenberg; Otto C Boerman|
|Type: JOURNAL ARTICLE Date: 2011-10-19|
|Title: Tumour biology : the journal of the International Society for Oncodevelopmental Biology and Medicine Volume: - ISSN: 1423-0380 ISO Abbreviation: - Publication Date: 2011 Oct|
|Created Date: 2011-10-19 Completed Date: - Revised Date: -|
Medline Journal Info:
|Nlm Unique ID: 8409922 Medline TA: Tumour Biol Country: -|
|Languages: ENG Pagination: - Citation Subset: -|
|Department of Nuclear Medicine, Radboud University Nijmegen Medical Centre, PO Box 9101, 6500 HB, Nijmegen, The Netherlands, email@example.com.|
|APA/MLA Format Download EndNote Download BibTex|
Journal ID (nlm-ta): Tumour Biol
Publisher: Springer Netherlands, Dordrecht
© The Author(s) 2011
Received Day: 23 Month: 8 Year: 2011
Accepted Day: 5 Month: 10 Year: 2011
Electronic publication date: Day: 19 Month: 10 Year: 2011
pmc-release publication date: Day: 19 Month: 10 Year: 2011
Print publication date: Month: 4 Year: 2012
Volume: 33 Issue: 2
First Page: 427 Last Page: 434
PubMed Id: 22009690
Publisher Id: 250
|Optimized labeling of NOTA-conjugated octreotide with F-18|
Address: +31-24-3615054 +31-24-3618942 firstname.lastname@example.org
|Christopher A. D’Souza2|
|William J. McBride2|
|Robert M. Sharkey3|
|Wim J. G. Oyen1|
|David M. Goldenberg3|
|Otto C. Boerman1|
1Department of Nuclear Medicine, Radboud University Nijmegen Medical Centre, PO Box 9101, 6500 HB Nijmegen, The Netherlands
2Immunomedics, Inc., Morris Plains, NJ 07950 USA
3Garden State Cancer Center, Center for Molecular Medicine and Immunology, Morris Plains, NJ 07950 USA
Radiolabeled receptor-binding peptides have emerged as an important class of radiopharmaceuticals that have changed radionuclide imaging. Peptides have been labeled with 111In and 99mTc for SPECT imaging and with positron emitters such as 68Ga, 64Cu, 86Y, and 18F for PET imaging. 18F is the most widely used radionuclide in PET and has excellent characteristics for peptide-based imaging since the half-life (110 min) matches the pharmacokinetics of most peptides. In addition, the low positron energy of 635 keV results in short ranges in tissue, which results in excellent preclinical imaging resolution (<2 mm). Various methods to label peptides with 18F have been investigated. Usually, a nucleophilic substitution reaction is used to produce an 18F-labeled synthon, which is then reacted with a (functionalized) peptide. One of the first generally applicable methods—and still most widely used—is based on conjugation of the synthon, N-succinimidyl-4-[18F]fluorobenzoate, to a primary amino group of the peptide . This method requires a time-consuming and laborious multistep synthesis. Specific activities obtained with this method ranged from 57,900 to 147,000 GBq/mmol . Searching for a faster method, Wester et al. developed an improved 18F-labeling method. This procedure is based on the reaction of [18F]fluorobenzaldehyde with an aminooxy-derivatized peptide, resulting in a stable oxime bond . The specific activities of the radiolabeled peptides were not mentioned. Others showed that [18F]fluorobenzaldehyde could also be reacted with hydrazino nicotinamide-conjugated peptides [4, 5]. The specific activity which could be achieved with an 18F-labeled leukotriene B4 antagonist was 1,200 GBq/mmol . To take advantage of the widespread availability of [18F]FDG, two groups explored [18F]FDG for labeling of aminooxy-derivatized peptides [6, 7]. Although it was shown that these functionalized peptides could be labeled with [18F]FDG, these methods require the use of carrier-free [18F]FDG, necessitating HPLC purification of [18F]FDG before conjugation with the peptide. Specific activities were not reported. Additionally, methods based on the broadly used Huisgen cycloaddition of alkynes and azides were explored for the radiofluorination of peptides [8–12]. Specific activities varied considerably from 4,800–12,300 GBq/mmol  to 100,000–200,000 GBq/mmol . In search for a kit-based radiofluorination method, silicon-based building blocks were used to fluorinate bombesin peptides. To improve the stability of the 18F-labeled peptides, they required to be functionalized with two tertiary butyl groups. This resulted in a lipophilic 18F-peptide and loss of tumor targeting [13, 14]. The maximal specific activity was 62,000 GBq/mmol. All of these methods require azeotropic drying of 18F in the presence of a cryptand, such as Kryptofix (K222).
We recently reported that NOTA-conjugated peptides could be labeled directly with 18F using aluminum to bind 18F [15–17]. With this two-step one-pot fluorination method, the peptide could be stably labeled with a 50% radiochemical yield at a high-specific activity within 45 min. Here, we present an optimization of the aluminum fluoride NOTA chelator labeling.
The octreotide peptide analog (IMP466), NOTA-D-Phe-cyclo[Cys-Phe-D-Trp-Lys-Thr-Cys]-Throl (MH+ 1305), was synthesized using standard Fmoc-based solid phase peptide synthesis. After the peptide was cleaved from the resin, the peptide was cyclicized by overnight incubation with DMSO. The Throl resin and the protected amino acids were purchased from CreoSalus Inc. (Louisville, KY). The bis-t-butyl NOTA ligand was provided by Immunomedics, Inc. All other chemicals were purchased from Sigma-Aldrich (St. Louis, MO) or Fisher Scientific (Pittsburgh, PA). All buffers used for radiolabeling were metal-free.
A Chromafix PS-HCO3 cartridge (ABX, Radeberg, Germany) with 4–6 GBq 18F (BV Cyclotron VU, Amsterdam, The Netherlands) was washed with 3 mL of metal-free water. 18F was eluted from the cartridge with 100 μL 0.9% NaCl. To the eluted Na18F, 2 mM AlCl3 in 0.1 M sodium acetate buffer, pH 4, was added (8.5 μl AlCl3 per GBq 18F). Then, 10–50 μL IMP466 (10 mg/mL) was added in 0.5 M sodium acetate (pH 4.1) and also 6 mg/mL gentisic acid. The reaction mixture was incubated at 100°C for 15 min unless stated otherwise. The radiolabeled peptide was purified on an RP-HPLC as described below. The 18F-IMP466-containing fractions were collected and diluted twofold with H2O and purified on an Oasis HLB cartridge (1 cc, 30 mg, Waters, Milford, MA) to remove acetonitrile and trifluoroacetic acid (TFA). In brief, the fraction was applied on the cartridge and the cartridge was washed with 3 mL H2O. The radiolabeled peptide was then eluted with 2 × 200 μL 50% ethanol. Upon injection in mice, the peptide was diluted with 0.9% NaCl.
The effect of the buffer on the labeling efficiency of IMP466 with 18F− was investigated (n = 3 for each buffer). IMP466 was dissolved at 10 mg/mL (7.7 mM) in sodium citrate buffer, sodium acetate buffer, 2-(N-morpholino)ethanesulfonic acid (MES), or 4-(2-hydroxyethyl)-1-piperazineethanesulfonic acid (HEPES) buffer. The molarity of all buffers was 1 M and the pH was 4.1. To 153 nmol (200 μg) of IMP466, 100 μL Al18F (pH 4.1) was added and incubated at 100°C for 15 min. Radiolabeling yield and specific activity were determined with RP-HPLC as described below.
The effect of the ionic strength on the labeling efficiency of IMP466 with 18F was investigated (n = 3 for each buffer). To IMP466 [100 μg (77 nmol) in 25 μL in sodium acetate buffer], 180 μL (unless stated otherwise) of acetonitrile, ethanol, dimethylformamide (DMF), or tetrahydrofuran (THF) was added [final concentration 80% (v/v)]. Finally, 20 μL Al18F (pH 4) was added and the mixture was incubated at 100°C for 15 min. Radiolabeling yield and specific activity were determined with RP-HPLC as described below.
The effect of the temperature on the labeling efficiency of IMP466 with 18F was investigated (n = 3 for each temperature). To IMP466 [77 nmol (100 μg) in 25 μL in sodium acetate buffer] 180 μL of acetonitrile and 20 μL “Al18F” (pH 4) were added. The mixtures were incubated at 40°C, 50°C, 60°C, or 100°C for 15 min. Radiolabeling yield and specific activity were determined with RP-HPLC as described below.
The radiolabeled preparations were analyzed by RP-HPLC on an Agilent 1200 system (Agilent Technologies, Palo Alto, CA, USA). Samples containing organic solvents were diluted 50-fold before injection on HPLC. A C18 column (Onyx monolithic, 4.6 × 100 mm, Phenomenex, Torrance, CA, USA) was used at a flow rate of 2 mL/min with the following buffer system: buffer A, 0.1% v/v TFA in water; buffer B, 0.1% v/v TFA in acetonitrile; and gradient, 0–5 min 97% buffer A, 5–35 min 80% buffer A to 75% buffer A. The radioactivity of the eluate was monitored using an in-line NaI radiodetector (Raytest GmbH, Straubenhardt, Germany). Elution profiles were analyzed using Gina-star software (version 2.18, Raytest GmbH, Straubenhardt, Germany). Specific activity was determined by HPLC using calibration curves based on the UV signal.
Ten microliters of the 18F-labeled IMP466 was incubated in 500 μL of freshly collected human serum and incubated for 4 h at 37°C. An equal volume of acetonitrile was added and the mixture was vortexed followed by centrifugation at 1,000×g for 5 min to pellet the precipitated serum proteins. The supernatant was analyzed on RP-HPLC as described above.
The in vivo stability of 18F-IMP466 was examined by injecting 18.5 MBq of 18F-IMP466 in a BALB/c nude mouse. After 30 min, the mouse was euthanized and blood and urine were collected and analyzed by HPLC.
The AR42J rat pancreatic tumor cell line was cultured in Dulbecco’s Modified Eagle’s Medium (DMEM, Gibco Life Technologies, Gaithersburg, MD, USA) supplemented with 4,500 mg/L D-glucose, 10% (v/v) fetal calf serum, 2 mmol/L glutamine, 100 U/mL penicillin, and 100 μg/mL streptomycin. Cells were cultured at 37°C in a humidified atmosphere with 5% CO2.
The apparent 50% inhibitory concentration (IC50) for binding the somatostatin receptors on AR42J cells was determined in a competitive binding assay using 19F-IMP466 and 115In-DTPA-octreotide to compete for the binding of 111In-DTPA-octreotide . 19F-IMP466 was formed by mixing an aluminum fluoride (AlF) solution (0.02 M AlCl3 in 0.5 M NaAc, pH 4, with 0.1 M NaF in 0.5 M NaAc, pH 4) with IMP466 and heating at 100°C for 15 min. The reaction mixture was purified by RP-HPLC on a C-18 column (30 × 150 mm, Sunfire, Waters, Milford, MA), as described above.
115In-DTPA-octreotide was made by mixing indium chloride (1 × 10−5 mol) with 10 μL DTPA-octreotide (1 mg/mL) in 50 mM NaAc, pH 5.5, and incubated at room temperature (RT) for 15 min. This sample was used without further purification. 111In-DTPA-octreotide (OctreoScan®) was radiolabeled according to the manufacturer’s protocol.
AR42J cells were grown to confluency in 12-well plates and washed twice with binding buffer (DMEM with 0.5% bovine serum albumin). After 10 min incubation at RT in binding buffer, 19F-IMP466 or 115In-DTPA-octreotide was added at a final concentration ranging from 0.1 to 1,000 nM, together with a trace amount (10,000 cpm) of 111In-DTPA-octreotide (radiochemical purity >95%). After incubation at RT for 3 h, the cells were washed twice with ice-cold PBS. Cells were scraped and cell-associated radioactivity was determined. Under these conditions, some internalization may occur. We therefore describe the results of this competitive binding assay as “apparent IC50” values rather than IC50. The apparent IC50 was defined as the peptide concentration at which 50% of binding without competitor was reached. Apparent IC50 values were calculated using GraphPad Prism software (version 4.00 for Windows, GraphPad Software, San Diego, CA, USA).
Male nude BALB/c mice (6–8 weeks old) were injected subcutaneously with 0.2 mL AR42J cell suspension of 1 × 107 cells/mL. When tumors were 5–8 mm in diameter, 370 kBq 18F-labeled IMP466 (0.2 nmol) was administered intravenously (n = 5). Separate groups of mice (n = 5) were co-injected with a 1,000-fold molar excess of unlabeled IMP466. One group of three mice was injected with unchelated (Al18F)2+. All mice were killed by CO2/O2 asphyxiation 2 h post-injection (p.i.). Tissues of interest were dissected, weighed, and counted in a gamma counter. The percentage of the injected dose per gram tissue was calculated. The animal experiments were approved by the local animal welfare committee and performed according to national regulations.
Mice with s.c. AR42J tumors were injected intravenously with 10 MBq 18F-IMP466 (0.7 nmol) per mouse. One and 2 h after the injection of peptide, mice were scanned on an animal PET/CT scanner (Inveon®, Siemens Preclinical Solutions, Knoxville, TN) with an intrinsic spatial resolution of 1.5 mm . The animals were placed in a supine position in the scanner. PET emission scans were acquired over 15 min, followed by a CT scan for anatomical reference (spatial resolution 113 μm, 80 kV, 500 μA). Scans were reconstructed using Inveon Acquisition Workplace software version 1.5 (Siemens Preclinical Solutions, Knoxville, TN), using an ordered set expectation maximization-3D/maximum a posteriori (OSEM3D/MAP) algorithm with the following parameters: matrix 256 × 256 × 159, pixel size 0.43 × 0.43 × 0.8 mm3, and a beta-value of 1.5.
All mean values are given ± standard deviation. Statistical analysis was performed using a Welch’s corrected unpaired Student’s t test or one-way analysis of variance using GraphPad InStat software (version 3.06, GraphPad Software). The level of significance was set at P < 0.05.
As shown previously, HPLC analysis of the reaction mixture (Fig. 1) demonstrated the presence of unbound (Al18F)2+ (Rt 0.8 min) and two radioactive peptide peaks with retention times of 17.4 and 19.8 min . Recent date revealed that these two peaks may be due to hindered rotation of the complex with F-18 in an axial position . In addition, a UV peak of IMP466 is present (Rt 21.4 min). The radiolabeled 18F-IMP66 could be obtained carrier-free after HPLC and HLB purification. This was confirmed by HPLC analysis: both the unbound (Al18F)2+ and the unlabeled IMP466 UV peaks disappeared (Fig. 1).
As reported previously, when the labeling procedure was performed using sodium acetate, MES, or HEPES, radiolabeling yields were 49 ± 2%, 46 ± 2%, and 48 ± 3%, respectively (n = 3 for each buffer) . In sodium citrate, no radiolabeling was observed. Specific activities of the purified peptides were in the same range for all buffers used. In sodium acetate buffer, the specific activity was 32,000 ± 17,000 GBq/mmol, whereas in MES and HEPES buffers, specific activities were 29,000 ± 14,000 and 31,000 ± 23,000 GBq/mmol, respectively.
To investigate whether the labeling efficiency could be improved by lowering the ionic strength, the labeling reaction with (Al18F)2+ was performed in the presence of increasing concentrations of acetonitrile: 25%, 50%, 67%, or 80% (v/v) acetonitrile. Labeling efficiency at 25% was 40 ± 5% and increased to 60 ± 15% and 87 ± 9% at 50% and 67%, respectively. Highest labeling efficiency was obtained at 80% (v/v) acetonitrile, 97 ± 2%.
In addition, the effect of other organic solvents was investigated. Labeling efficiency in the presence of ethanol and DMF was 97 ± 2% and 97 ± 3%, respectively. Radiolabeling efficiency in THF was 92 ± 7%. When the labeling reaction was performed in the absence of organic solvent, the labeling efficiency was 46 ± 7%.
The effect of the incubation temperature was studied using the optimal labeling condition described above, i.e., in the presence of 80% (v/v) acetonitrile. Labeling efficiency improved with increasing temperatures: at 40°C, the labeling efficiency was 30 ± 21%, and at 50°C, the yield was 61 ± 14%. At a temperature of 60°C, the labeling efficiency was 83 ± 19%.
We previously demonstrated that the IC50 was not affected by the radiofluorination . Briefly, the apparent IC50 of Al19F-labeled IMP466 was 3.6 ± 0.6 nM. The apparent IC50 of the reference peptide, 115In-DTPA-octeotride (OctreoScan®), was 6.3 ± 0.9 nM. The affinity profiles are shown in Fig. 2.
In line with previous results , 18F-labeled IMP466 did not release (Al18F)2+ after incubation in human serum at 37°C for 4 h, indicating excellent stability of the Al18F-NOTA-octreotide.
The biodistribution of 18F-IMP466 in BALB/c nude mice with s.c. AR42J tumors at 2 h p.i. is summarized in Fig. 3 (data adapted from ). Unchelated (Al18F)2+ was included as a control. Tumor uptake of 18F-IMP466 was 28.3 ± 5.7% ID/g at 2 h p.i. Tumor uptake in the presence of an excess of unlabeled IMP466 was significantly decreased (8.6 ± 0.7% ID/g, P < 0.002), indicating that tumor uptake was receptor-mediated. Blood levels were low (0.10 ± 0.07% ID/g, 2 h p.i.), which resulted in a tumor-to-blood ratio of 300 ± 90. Uptake in normal tissues, except in the kidneys, was low. Receptor-mediated uptake was observed in SST2 receptor-expressing tissues, such as adrenal glands, pancreas, and stomach. Bone uptake of 18F-IMP466 was very low as compared to uptake after injection of non-chelated (Al18F)2+ (0.33 ± 0.07 vs. 36.9 ± 5.0% ID/g at 2 h p.i., respectively; P < 0.001), indicating good in vivo stability of the 18F-IMP466.
Fused PET and CT scans are shown in Fig. 4. 18F-IMP466 showed high uptake in the tumor and high retention in the kidneys where the activity was localized mainly in the renal cortex. In addition, some intestinal uptake was observed. The PET/CT scans also demonstrated that the (Al18F)2+ was stably chelated by the NOTA chelator, since no bone uptake was observed.
Radiolabeling of peptides with fluorine-18 generally involves laborious and time-consuming procedures and first requires the synthesis of an 18F-labeled synthon. In our initial studies, we have shown that a NOTA-conjugated pretargeting peptide (IMP449) could be labeled with Al18F to yield a product with a good biodistribution profile . These studies were performed with 18F− that was eluted from a QMA cartridge with KHCO3 and required careful neutralization with acetic acid in an effort to control the pH. Subsequently, we found that the varying radiochemical yields arising during the neutralization could be avoided if the 18F− was eluted with 0.9% saline .
In the present study, we used a NOTA which was covalently linked to the peptide, using one of the carboxylic groups. Recent findings indicated that this chelator performed equally well as the isothiocyanato-benzyl derivative of NOTA [16, 17]. We found that the labeling of NOTA-octreotide failed in the presence of sodium citrate buffer. This might be due to the high affinity of citric acid for Al(III), as described by Rajan et al. . Recently, we obtained considerable improvements in radiochemical yields when the labeling was performed in the presence of an organic hydrophilic solvent . Herein we describe the optimization of the 18F-labeling of NOTA-octreotide (IMP466).
The labeling yield improved considerably when performing the reaction at a lower ionic strength using either acetonitrile, ethanol, or DMF. For subsequent experiments, we used acetonitrile which could easily be evaporated after the labeling reaction. Lowering the amount of acetonitrile resulted in lower labeling yields. Obviously, for future clinical studies, the use of ethanol is preferred over acetonitrile.
The peptide concentration plays a crucial role in the Al18F-NOTA-labeling reaction. A labeling yield of 52% was obtained at a peptide concentration of 204 μM in the presence of 67% acetontirile. In a previous study , a peptide concentration of 1,815 μM was required to obtain a 50% labeling efficiency. This optimal concentration is approximately tenfold lower as reported for other peptide fluorination methods [1, 3, 5].
The radiolabeled peptide could be obtained carrier-free after preparative HPLC separation on a monolithic C-18 column. Purification on a cartridge was not feasible due to the small difference in organic solvent concentration required to separate the labeled from the unlabeled peptide on HPLC.
We demonstrated that the affinity of 18F-NOTA-octreotide was at least as good as that of 111In-DTPA-octreotide and was comparable with values reported in literature for DOTA-octreotate and DOTA-TOC .
The biodistribution of the 18F-NOTA-octreotide was studied in AR42J tumor-bearing mice. 18F-IMP466 showed a high tumor uptake at 2 h p.i., with lower uptake in all other organs. The in vivo studies also showed the excellent stability of the Al18F–NOTA complex, since no significant bone uptake could be measured, and the intact product was isolated in the urine.
The current method can be performed in one pot, is fast (45 min), yields carrier-free fluorinated peptide in nearly quantitative yield, and does not affect the pharmacokinetics of octreotide. In most 18F-labeling strategies for peptides and proteins, a fluorinated synthon such as succinimidyl-[18F]fluorobenzoate , 4-[18F]fluorobenzaldehyde , and 2-[18F]fluoropropionic acid 4-nitrophenyl ester  needs to be synthesized first. In general, these fluorination methods are based on a nucleophilic substitution which requires laborious azeotropic drying of the [18F]fluoride/kryptofix complex. Subsequently, these synthons are reacted with the (functionalized) peptide, leading to longer synthesis times and lower overall yields.
More recently, a method based on Si-F has been published, in which the 18F is bound to a silicon-containing building block in a single step [13, 14]. Although somewhat similar to our approach, the Si-18F initially proved to be unstable, but could be stabilized by the addition of tertiary butyl groups. This, however, leads to a strong increase in lipohilicity (log P, 1.3 ± 0.1).
Finally, “click” chemistry has been explored for the radiofluorination of peptides [9–11]. Although the yield of these click chemistry-based labeling procedures based on the alkyne-azide cycloaddition is excellent (>80%), the method starts with the fluorination of an azide or alkyne, such as fluoro(ethyl)azide or a fluoroalkyne. This requires azeotropic drying of the fluoride, resulting in a time-consuming multistep procedure. Recently, the radiosynthesis of a [18F]fluoroethyl triazole-labeled [Tyr3]octreotate has been described using a copper-catalyzed azide-alkyne cycloaddition reaction . The [18F]fluoroethyl azide was produced in 50% decay-corrected yields and the click reaction proceeded in 5 min at room temperature in 50–66% decay-corrected yields.
Compared to a 68Ga labeling, the Al18F method is easy and versatile, mainly due to the fact that both methods are based on a chelator-derivatized peptide. One of the advantages of the AlF method is the longer half-life of 18F, allowing PET scanning at later timepoints after injection of the tracer.
In conclusion, our new approach combines the ease of chelator-based radiolabeling methods with the advantages of 18F (i.e., half-life, availability, and positron energy). The Al18F-labeled NOTA-octreotide could be synthesized carrier-free in quantitative yields in <45 min without the need to synthesize an 18F synthon. Moreover, the fluorinated peptide was stable in vitro and in vivo and has excellent tumor-targeting properties. Therefore, this fluorination method is a promising facile and versatile fluorination procedure.
We thank Bianca Lemmers-de Weem and Kitty Lemmens-Hermans for technical assistance. This work was funded in part by NIH grant 5R44RR028018 from the National Center for Research Resources, Bethesda, MD, to WJM.
Conflict of interest WJM, CAD’S, and DMG are employed or have financial interest in Immunomedics, Inc.
Open Access This article is distributed under the terms of the Creative Commons Attribution Noncommercial License which permits any noncommercial use, distribution, and reproduction in any medium, provided the original author(s) and source are credited.
|1..||Lang L,Eckelman WC. One-step synthesis of 18F labeled [18F]-N-succinimidyl 4-(fluoromethyl)benzoate for protein labelingAppl Radiat IsotYear: 1994451155116310.1016/0969-8043(94)90031-07894395|
|2..||Lang L,Eckelman WC. Labeling proteins at high specific activity using N-succinimidyl 4-[F-18](fluoromethyl) benzoateAppl Radiat IsotYear: 19974816917310.1016/S0969-8043(96)00151-09219343|
|3..||Poethko T,Schottelius M,Thumshirn G,Hersel U,Herz M,Henriksen G,Kessler H,Schwaiger M,Wester HJ. Two-step methodology for high-yield routine radiohalogenation of peptides: 18F-labeled RGD and octreotide analogsJ Nucl MedYear: 20044589290215136641|
|4..||Bruus-Jensen K,Poethko T,Schottelius M,Hauser A,Schwaiger M,Wester HJ. Chemoselective hydrazone formation between HYNIC-functionalized peptides and F-18-fluorinated aldehydesNucl Med BiolYear: 20063317318310.1016/j.nucmedbio.2005.10.01016546671|
|5..||Rennen HJ,Laverman P,Eerd JE,Oyen WJ,Corstens FH,Boerman OC. PET imaging of infection with a HYNIC-conjugated LTB4 antagonist labeled with F-18 via hydrazone formationNucl Med BiolYear: 20073469169510.1016/j.nucmedbio.2007.04.01217707809|
|6..||Hultsch C,Schottelius M,Auernheimer J,Alke A,Wester HJ. 18F-Fluoroglucosylation of peptides, exemplified on cyclo(RGDfK)Eur J Nucl Med Mol ImagingYear: 2009361469147410.1007/s00259-009-1122-019350236|
|7..||Namavari M,Cheng Z,Zhang R,De A,Levi J,Hoerner JK,Yaghoubi SS,Syud FA,Gambhir SS. A novel method for direct site-specific radiolabeling of peptides using [18F]FDGBioconjug ChemYear: 20092043243610.1021/bc800422b19226160|
|8..||Iddon L,Leyton J,Indrevoll B,Glaser M,Robins EG,George AJT,Cuthbertson A,Luthra SK,Aboagye EO. Synthesis and in vitro evaluation of [F-18]fluoroethyl triazole labelled [Tyr3]octreotate analogues using click chemistryBioorg Med Chem LettYear: 2011213122312710.1016/j.bmcl.2011.03.01621458258|
|9..||Glaser M,Arstad E. "Click labeling" with 2-[18F]fluoroethylazide for positron emission tomographyBioconjug ChemYear: 20071898999310.1021/bc060301j17429938|
|10..||Hausner SH,Marik J,Gagnon MK,Sutcliffe JL. In vivo positron emission tomography (PET) imaging with an αvβ6 specific peptide radiolabeled using 18F-“click” chemistry: evaluation and comparison with the corresponding 4-[18F]fluorobenzoyl- and 2-[18F]fluoropropionyl-peptidesJ Med ChemYear: 2008515901590410.1021/jm800608s18785727|
|11..||Marik J,Sutcliffe JL. Click for PET: rapid preparation of [F-18]fluoropeptides using Cu-I catalyzed 1,3-dipolar cycloadditionTetrahedron LettYear: 2006476681668410.1016/j.tetlet.2006.06.176|
|12..||Li ZB,Wu Z,Chen K,Chin FT,Chen X. Click chemistry for 18F-labeling of RGD peptides and microPET imaging of tumor integrin alphavbeta3 expressionBioconjug ChemYear: 2007181987199410.1021/bc700226v18030991|
|13..||Hohne A,Mu L,Honer M,Schubiger PA,Ametamey SM,Graham K,Stellfeld T,Borkowski S,Berndorff D,Klar U,Voigtmann U,Cyr JE,Friebe M,Dinkelborg L,Srinivasan A. Synthesis, 18F-labeling, and in vitro and in vivo studies of bombesin peptides modified with silicon-based building blocksBioconjug ChemYear: 2008191871187910.1021/bc800157h18754574|
|14..||Mu L,Hohne A,Schubiger PA,Ametamey SM,Graham K,Cyr JE,Dinkelborg L,Stellfeld T,Srinivasan A,Voigtmann U,Klar U. Silicon-based building blocks for one-step 18F-radiolabeling of peptides for PET imagingAngew Chem Int Ed EnglYear: 2008474922492510.1002/anie.20070585418496798|
|15..||McBride WJ,D’Souza CA,Sharkey RM,Karacay H,Rossi EA,Chang CH,Goldenberg DM. Improved 18F labeling of peptides with a fluoride-aluminum-chelate complexBioconjug ChemYear: 2010211331134010.1021/bc100137x20540570|
|16..||Laverman P,McBride WJ,Sharkey RM,Eek A,Joosten L,Oyen WJG,Goldenberg DM,Boerman OC. A novel facile method of labeling octreotide with (18)F-fluorineJ Nucl MedYear: 20105145446110.2967/jnumed.109.06690220150268|
|17..||McBride WJ,Sharkey RM,Karacay H,D’Souza CA,Rossi EA,Laverman P,Chang CH,Boerman OC,Goldenberg DM. A novel method of 18F radiolabeling for PETJ Nucl MedYear: 20095099199810.2967/jnumed.108.06041819443594|
|18..||Visser EP,Disselhorst JA,Brom M,Laverman P,Gotthardt M,Oyen WJ,Boerman OC. Spatial resolution and sensitivity of the Inveon small-animal PET scannerJ Nucl MedYear: 20095013914710.2967/jnumed.108.05515219139188|
|19..||D’Souza C,McBride WJ,Sharkey RM,Todara LJ,Goldenberg DM. High-yielding aqueous 18F-labeling of peptides via Al18F chelationBioconjug ChemYear: 2011221793180321805975|
|20..||Rajan KS,Mainer S,Rajan NL,Davis JM. Studies on the chelation of aluminum for neurobiological applicationJ Inorg BiochemYear: 19811433935010.1016/S0162-0134(00)80290-17276932|
|21..||Reubi JC,Schar JC,Waser B,Wenger S,Heppeler A,Schmitt JS,Macke HR. Affinity profiles for human somatostatin receptor subtypes SST1-SST5 of somatostatin radiotracers selected for scintigraphic and radiotherapeutic useEur J Nucl Med Mol ImagingYear: 20002727328210.1007/s002590050034|
|22..||Guhlke S,Wester HJ,Bruns C,Stocklin G. (2-[18F]fluoropropionyl-(D)phe1)-octreotide, a potential radiopharmaceutical for quantitative somatostatin receptor imaging with PET: synthesis, radiolabeling, in vitro validation and biodistribution in miceNucl Med BiolYear: 19942181982510.1016/0969-8051(94)90161-99234331|
Keywords: Keywords Octreotide, Radiofluorination, NOTA, Peptide, PET, Aluminum fluoride.
Previous Document: Inhibition of NOTCH3 signalling significantly enhances sensitivity to cisplatin in EBV-associated na...
Next Document: Thermoregulatory response of anterolateral thigh flap compared with latissimus dorsi myocutaneous fl...