Document Detail


Nano-scaled hydroxyapatite/polymer composite IV. Fabrication and cell adhesion properties of a three-dimensional scaffold made of composite material with a silk fibroin substrate to develop a percutaneous device.
MedLine Citation:
PMID:  15558335     Owner:  NLM     Status:  MEDLINE    
Abstract/OtherAbstract:
Nano-scaled sintered hydroxyapatite (HAp) particles with an a-axis length of 87 +/- 23 nm, a c-axis length of 236 +/- 81 nm, and a mean aspect ratio ( c/ a) of 2.72 were covalently linked onto a silk fibroin (SF) substrate chemically modified by graft polymerization with gamma-methacryloxypropyl trimethoxysilane (MPTS). Graft polymerization with poly(MPTS) on SF was conducted by free-radical initiation in a water solvent with pentaethylene glycol dodecyl ether as a nonionic surfactant. The alkoxysilyl groups of the graft polymers avoided hydrolysis and maintained their activity in coupling with the hydroxyl groups on the HAp surface despite the use of water as the reaction solvent. The weight gain of poly(MPTS) on SF increased with increasing the reaction time, eventually reaching a plateau value of about 15 wt% after 50 min of reaction time. After HAp covalent coating, the particles separated or aggregated into several crystals, as shown by scanning electron microscopic observation. L929 fibroblast cells adhered more plentifully on HAp-coated SF compared to untreated SF and hydrolyzed poly(MPTS)-grafted SF during 24 h or 48 h of incubation. The cells adhered only on the HAp surface but not at all on the dehydrated grafted surface of SF without HAp. A button-shaped prototype for a percutaneous device was manufactured by transplantation of HAp-coated SF fibers of about 100 microm in length onto silicone moldings using an adhesive, and the device showed good cell adhesiveness.
Authors:
Tsutomu Furuzono; Shoji Yasuda; Tsuyoshi Kimura; Singo Kyotani; Junzo Tanaka; Akio Kishida
Related Documents :
18698625 - Multinozzle low-temperature deposition system for construction of gradient tissue engin...
15389495 - Novel fabricated matrix via electrospinning for tissue engineering.
15178015 - Wet spinning of silk polymer. ii. effect of drawing on the structural characteristics a...
20614895 - Coaxially electrospun pvdf-teflon af and teflon af-pvdf core-sheath nanofiber mats with...
23340115 - Drinking-water exposure to a mixture of nitrate and low-dose atrazine metabolites and s...
20931965 - Nanopod formation through gold nanoparticle templated and catalyzed cross-linking of po...
Publication Detail:
Type:  Journal Article; Research Support, Non-U.S. Gov't    
Journal Detail:
Title:  Journal of artificial organs : the official journal of the Japanese Society for Artificial Organs     Volume:  7     ISSN:  1434-7229     ISO Abbreviation:  J Artif Organs     Publication Date:  2004  
Date Detail:
Created Date:  2004-11-23     Completed Date:  2005-03-18     Revised Date:  2006-11-15    
Medline Journal Info:
Nlm Unique ID:  9815648     Medline TA:  J Artif Organs     Country:  Japan    
Other Details:
Languages:  eng     Pagination:  137-44     Citation Subset:  IM    
Affiliation:
Department of Bioengineering, National Cardiovascular Center Research Institute, 5-7-1 Fujishiro-dai, Suita, Osaka 565-8565, Japan. furuzono@ri.ncvc.go.jp
Export Citation:
APA/MLA Format     Download EndNote     Download BibTex
MeSH Terms
Descriptor/Qualifier:
Biocompatible Materials / chemistry*
Cell Adhesion*
Durapatite / chemistry*
Materials Testing
Membranes, Artificial
Methacrylates
Nanotechnology
Particle Size
Silanes / chemistry*
Silk
Chemical
Reg. No./Substance:
0/Biocompatible Materials; 0/Membranes, Artificial; 0/Methacrylates; 0/Silanes; 0/Silk; 1306-06-5/Durapatite; 2530-85-0/methacryloxypropyltrimethoxysilane

From MEDLINE®/PubMed®, a database of the U.S. National Library of Medicine


Previous Document:  Effect of the elastic conditions around a stentless valvular bioprosthesis on opening behavior.
Next Document:  Myocardial microvascular perfusion after transfusion of liposome-encapsulated hemoglobin evaluated i...