Document Detail

Incident angle of saltating particles in wind-blown sand.
Jump to Full Text
MedLine Citation:
PMID:  23874470     Owner:  NLM     Status:  MEDLINE    
Abstract/OtherAbstract:
Incident angle of saltating particles plays a very important role in aeolian events. In this paper, the incident angles of sand particles near the sand bed were measured in wind tunnel. It reveals that the incident angles range widely from 0° to 180° and thereby the means of angles are larger than published data. Surprisingly, it is found the proportion that angles of 5°-15° occupy is far below previous reports. The measuring height is probably the most important reason for the measurement differences between this study and previous investigations.
Authors:
Lin-Tao Fu; Tian-Li Bo; Hai-Hua Gu; Xiao-Jing Zheng
Publication Detail:
Type:  Journal Article; Research Support, Non-U.S. Gov't     Date:  2013-07-09
Journal Detail:
Title:  PloS one     Volume:  8     ISSN:  1932-6203     ISO Abbreviation:  PLoS ONE     Publication Date:  2013  
Date Detail:
Created Date:  2013-07-22     Completed Date:  2014-02-24     Revised Date:  2014-10-21    
Medline Journal Info:
Nlm Unique ID:  101285081     Medline TA:  PLoS One     Country:  United States    
Other Details:
Languages:  eng     Pagination:  e67935     Citation Subset:  IM    
Export Citation:
APA/MLA Format     Download EndNote     Download BibTex
MeSH Terms
Descriptor/Qualifier:
Humans
Particulate Matter*
Physics
Silicon Dioxide*
Wind*
Chemical
Reg. No./Substance:
0/Particulate Matter; 7631-86-9/Silicon Dioxide
Comments/Corrections
Erratum In:
PLoS One. 2013;8(9). doi:10.1371/annotation/8a3d1140-8ca3-4f8e-a4a0-8f47f6622056

From MEDLINE®/PubMed®, a database of the U.S. National Library of Medicine

Full Text
Journal Information
Journal ID (nlm-ta): PLoS One
Journal ID (iso-abbrev): PLoS ONE
Journal ID (publisher-id): plos
Journal ID (pmc): plosone
ISSN: 1932-6203
Publisher: Public Library of Science, San Francisco, USA
Article Information
Download PDF
Copyright: 2013 Fu et al
License:
Received Day: 24 Month: 1 Year: 2013
Accepted Day: 23 Month: 5 Year: 2013
collection publication date: Year: 2013
Electronic publication date: Day: 9 Month: 7 Year: 2013
Volume: 8 Issue: 7
E-location ID: e67935
PubMed Id: 23874470
ID: 3706613
Publisher Id: PONE-D-13-03824
DOI: 10.1371/journal.pone.0067935

Incident Angle of Saltating Particles in Wind-Blown Sand Alternate Title:Incident Angle
Lin-Tao Fu12
Tian-Li Bo12*
Hai-Hua Gu12
Xiao-Jing Zheng12
Vanesa Magaredit1 Role: Editor
1Key Laboratory of Mechanics on Environment and Disaster in Western China, Ministry of Education, Lanzhou University, Lanzhou, China
2Department of Mechanics, School of Civil Engineering and Mechanics, Lanzhou University, Lanzhou, China
Plymouth University, United Kingdom
Correspondence: * E-mail: btl@lzu.edu.cn
[conflict] Competing Interests: The authors have declared that no competing interests exist.
Contributed by footnote: Conceived and designed the experiments: LTF TLB XJZ. Performed the experiments: LTF HHG. Analyzed the data: LTF HHG. Contributed reagents/materials/analysis tools: TLB XJZ. Wrote the paper: LTF TLB HHG XJZ.

Introduction

Saltation is the key factor in the wind-blown sand movement [1]. The saltating particles shape the land surface [2] and load the atmosphere with mineral dust [3], which therefore causes the change of landscape and climate on both Earth and Mars [4]. With the development of computers, numerical simulation becomes an important way to study the movement of wind-blown sand, particularly on Mars. However, except for two models [5], [6] in which each collision is simulated through contact potentials in MD-simulation to simulate the sand bed process at particle scale, many models encounter the same problem that it is difficult to determine the information of lift-off particles after sand-bed collision [7].

The information of lift-off particles typically depends on the incident speed and the incident angle of saltating particles. Here, the incident angle is defined as angle between the incident velocity and the horizontal level (See Fig. 1). Both experimental and simulated results [8], [9], [10], [11], [12] suggest that the number of ejected particles is linearly related to incident speed, i.e., NA.Vimp, where A is the coefficient and Vimp is the incident speed. This relation is widely employed in numerical models. But, in many models, the coefficient A is taken as a constant which includes gravity, particle characteristic diameter and particle mass [13]. Besides, according to wind tunnel experiment [10], the restitution coefficient of incident speed is usually chosen as a value 0.5–0.6. Therefore, it seems that the incident angle of particles is considered as a constant in many past and current studies.

In fact, both the number of ejected particles and the restitution coefficient vary with incident angles. Experimental results [12], [14], [15] indicate that the number of ejected particles increases but the restitution coefficient decreases with the rise of incident angle. The incident angle was taken as a constant because some wind tunnel experiments [10], [16], [17], [18] showed a narrow range (5°–15°) of incident angle. In such a narrow range, the variation of both the number of ejected particles and the restitution coefficient caused by the change of angle is small.

However, the range of incident angles in wind-blown sand may be wider than those classic reports. Jensen and Sorensen [19] reported a wider range of incident angles by considering the saltating particles with low trajectories. The wind tunnel measurements of Dong et al. [20] and Kang et al. [21] reveal that the incident angles range from 0° to180°. The wind tunnel study of Rasmussen and Sorensen [22] shows there are many particles backward flying against the wind near the sand bed, which also suggests the wide range of incident angle. Apart from the difference in distribution range, the distribution laws from experiments are different. The results of Kang et al. [21] show the distribution of incident angles follows a negative exponent law. But the results of Dong et al. [20] reveal a more complex distribution, rather than the negative exponent law. Thus, the treatment, that the incident angle was taken as a constant, may be over-simplified. Therefore, we need some more experiments to study the incident angle of particles in wind-blown sand.

In addition, once the incident angles distribute widely, it becomes important and necessary to investigate the incident angle distribution of each incident speed. Rice et al. [11] studied the relation between lift-off speed of ejected particles and lift-off angle of those particles. It reveals that ejected particles with a small speed have a wide range of lift-off angles as well as a large mean of angles but those particles with a large speed have a narrow range and a small mean of angles. It is interesting to find whether the relation between incident angle and incident speed follows the law between angles of ejected particles and speeds of those particles.

Therefore, this paper is aimed to investigate the incident angle of saltating particles near the sand bed and the influence of incident angles on the evolution of wind-blown sand. The experiment design is introduced in Methods section. In Results and Discussion section, the distributions and the means of measured incident angles in various cases are given and some discussion also is followed. A concise conclusion is arranged in the end.


Methods

The experiments were conducted in a multiple environmental wind tunnel located at Lanzhou University. The wind tunnel was described in detail by Tong and Huang [23]. The working section of the tunnel is 20 m in length. The sand material comes from Badain Jaran Desert with the average diameter of 0.3 mm. The thickness of sand bed is 4.5 cm and the length of sand bed is up to 14 m. The experiment design in this paper is followed the work of Rasmussen et al. [24] (Details see Fig. 2). Triangular turbulence spires and solid roughness elements were placed at the front of working section to help the development of boundary layer. A sand supply system was fixed at the end of roughness elements. Thus, the experiments were carried out in a transport limited condition but not a supply limited condition.

The wind profile in the wind-blown sand was measured by the outdoor constant temperature anemometer (Details see Fig. A in File S1). The motion of particles was measured by a PTV system [25], [26]. During the experiments, the CCD camera was arranged at 2 m before the ending point of working section. Unlike many research before, the laser sheet was not casted into the sand bed vertically but approached the bed with an angle. This treatment can decline the influence of light reflection of sand bed on the measuring results. The distance between camera and layer sheet is 65 cm. The camera can capture 7 pairs of pictures per second. Fig. 3 shows a part of an example image pair. The time delay between the two pictures in each pair is 0.2 ms. The camera was set to capture pictures at a resolution of 2048×2048 pixel2.

During each run, three steps were followed. First, the sand bed was smoothed to keep the thickness of bed unchanged. Second, prior to measurements, both the wind tunnel and the sand supply system have been running for a short time to ensure the well development of wind-blown sand. This delay of time depends on wind strengths. In case of weak strength the delay is about 30 s, while the delay reduces to about 10 s for strong strength. Finally, the motion of sand particles was measured continuously. The duration of the measurement in a run varies with wind strengths. The duration ranges from 350 s to 90 s corresponding to wind strengths. Thus, under every wind strength condition, the captured images are more than 400 pairs and the obtained total samples in the whole image region are up to 107.

Because of the random fluctuation of sand bed and the complex interactions among particles, it is difficult to judge whether the movement of a particle is saltation or creep at the place very close to the bed (e.g. 0–1 mm). Therefore, the speed and the angle of incident particles at 1–3 mm were taken as the incident information of saltating particles. The middle height 2 mm was taken as the mean height of these particles. Here, based on the measured data, we performed statistics for the distribution and the mean of incident angles at 2 mm in various cases of wind strengths (u* = 0.30, 0.39 and 0.48 m/s). Moreover, we conducted statistics for the distribution and the mean of incident angles at 2, 4, 6, 8 and 10 mm at fixed wind strength (u* = 0.39 m/s) respectively. The mean ( ) and the corresponding mean square error ( ) are calculated as and , respectively. Here, N is the sample number. In the following section, the results of data statistics and corresponding discussion were shown. The data, used in the following, are uploaded as File S2.


Results and Discussion
Wind Profile

Since the size of wind tunnel is large, the thickness of turbulent boundary layer reaches about 40 cm [23]. Vertical profiles of time-averaged streamwise speed U(z) ranging from 2 to 32 cm can be described as (Details see Fig. B in File S1): . Here, u* is friction speed. z is the vertical coordinate. κ is the von Kármán constant and taken as 0.4. z0 is the aerodynamic roughness length. The roughness could be well fit by the Bagnold roughness law: , where zf is the height of the focus point and uf is the corresponding wind speed (zf = 6 mm, uf = 2.7 m/s).

Population Distribution and Mean Value of Incident Angles

From Fig. 4a, it can be seen that the distribution of measured incident angles ranges from 0° to 180°. This wide range is quite different from the results of many previous studies [10], [16], [17], [18] which suggest a narrow distribution of incident angles. But, it is consistent with the measurements of Dong et al. [20] and Kang et al. [21]. The wide distribution of incident angles may be caused corporately by sand-bed collision [5], mid-air collision of sand [27] and turbulence of boundary layer [28]. The results of Kang et al. [21] reveal that the distribution of incident angle follows a negative exponent law in cases of wind strengths. But both our results and the results of Dong et al. [20] reveal a more complex distribution, rather than the negative exponent law. In particular, our results show a large proportion of sand particles have an incident angle near 90°, which is also found in the study of Dong et al. [20]. This is possibly caused by the large proportion of saltating particles with low trajectories in such low height [19]. In addition, the distributions obtained by both us and Dong et al. [20] vary with the change wind strengths. In fig. 5a, the means of incident angles obtained from our data range from 48° to 82°. They are larger than previous studies, including the measurements of Dong et al. [20] and Kang et al. [21]. Furthermore, the statistics for the proportion that angles of 5°–15° occupy were performed (Fig. 5a). Results indicate that the proportion is far below previous thought. Although the proportion rises with the increase of u*, it only reaches 12% at the maximum measuring wind strength.

In our opinion, the measuring height is probably the most important reason for the measurement differences between our results and published data. Because of the limitation of technique, scientists [14], [16], [17], [18], [25] usually measured the motion of particles at the place far from the bed (generally higher than 5 mm) where the particle density is low. Thus, they lost the information of particles with lower trajectories [19]. Dong et al. [20] and Kang et al. [21] used the PDA and PDPA to measure the movement of sand particles much closer to the bed respectively and they therefore found the wide distribution of incident angles. Also, at a high place, the speed of a particle is usually dominated by its horizontal speed component, which therefore leads to a small incident angle. The statistics for the distributions of incident angles at wind strength u* = 0.39 m/s along height also were conducted (Fig. 4b). It can be found that the distribution of incident angle trends to be a negative exponent law with the raise of height (Details see Table S1 in File S1). The means of incident angles along height also are calculated (Fig. 5b). It reveals that the means of incident angles vary from 63° to 19° with the increase of height. The proportion that small incident angles occupy increases along with increasing height. In detail, the proportion, that angles of 5°–15° occupy, rises quickly with height and soon reaches up to about 50% (Fig. 5b). Thus, it is reasonable to explain why previous studies showed the means of incident angles varied among 10°–20° and most of incident angles distributed between 5°–15°.

Apart from the measuring height, the finite size of wind tunnel affects the transportation of sand and the effect becomes significant with the decrease of the size [29]. One way to solve the problem is providing a sand supply at the front of sand bed [24]. Although Rice et al. [10], [11] provided a sand supply, the distance between the supply point and the measuring point is not long enough.

The Angle Distribution and Mean Angle of Incident Particles with the Same Speed

In this section, the angle distributions of incident particles with the same speed at the height of 2 mm were analyzed. Here, the speeds of sand particles in a speed interval are represented by the middle value of the interval. The interval of speed in this paper is 0.2 m/s. That is, for example, if V = 0.5 m/s, it says the speeds of particles range from 0.4 to 0.6 m/s. From Fig. 6a, it can be seen that the angles of particles for the same speed distribute widely from 0° to 180° but most of them are located within 0°–90°. The distributions of incident angle vary with the change of particle speed. For instance, when V = 0.3 m/s, the distribution shows us bimodality; while the distribution shows three peaks when V = 0.5 m/s. These various distribution laws should be caused by the complex interactions between incident particles and sand bed as well as other saltating particles. With the increase of incident speeds, the proportion of small angles increases and that of large angles decreases accordingly. The wind strength also affects the distribution of incident angles. Fig. 6b shows the distributions of incident angles when the incident speed is 0.5 m/s. It suggests that the proportion of small angle increases with wind strengths. Moreover, the means of incident angles in cases of incident speeds were carried out (Fig. 7a). It reveals that the mean value of incident angles decreases with incident speeds. This law is agreed with the study of Rice et al. [11]. The explanation of the variation of incident angle should trace back to the definition. Since the change of vertical component of particle speed in wind-blown sand is small relative to horizontal component, a large incident speed usually means a large stream-wise component and therefore a small incident angle. The change of the proportion with both incident speeds and wind strengths is shown in Fig. 7b. It can be seen the proportion almost doesn’t change with incident speeds when u* = 0.30 m/s. But with the increase of wind strengths, the proportion goes up with incident speeds. Therefore, the incident angle could be regarded as the function of incident speeds and wind strengths. In addition, the Fig. 7b also tells that the proportion is very low.

Based on the results above, we made some discussion here. The wider distribution of and very low proportion of 5°–15° incident angles make the predominant role of small incident angle in wind-blown sand challengeable. The predominant role of small incident angle has been stated in previous studies because some experiments [30], [31] show only very fast particle can lead to splash. For instance, the works of Beladjine et al. [30] and Oger et al. [31] suggest that the lowest speed of particle with diameter of 0.3 mm for splash is about 2.2 m/s. And, such large speed of particles usually means a small incident angle in wind-blown sand. Thus, the key to this problem is the minimum incident speed for splash.

In fact, there are two works indicating a lower threshold value. The studies of Werner [15] and Anderson and Haff [8] suggest the minimum impact speed for particle with diameter of 0.3 mm is about 1.0 m/s or lower. Furthermore, our experimental data at u* = 0.3 m/s show that there are only several particles with a speed larger than 2.2 m/s, but a few particles with a speed larger than 1.0 m/s. Therefore, it is possible that the works of Beladjine et al. [30] and Oger et al. [31] overestimate the below incident speed, and thus the particle with a relative large incident angle also could lead to splash. The main difference in below incident speed among experiments may come from experimental materials. The material used in Beladjine et al. [30] and Oger et al. [31] is the PVC bead with the diameter of 6 mm. But Werner [15] and Anderson and Haff [8] conducted their experiments by real sand.

Because we lack systematical measurement of minimum incident speed for splash in wind-blow sand, we could not make sure the contribution of small incident angle to the ejection of particles quantitatively. However, we do believe the important role of the particles with small incident angle, because small angle often results in high probability of rebound apart from ejection of particles [12].

Conclusions

In this paper we measured the incident angles of saltating particles in wind-blown sand by PTV technique. It reveals that the incident angles near the sand bed range widely from 0° to 180°. The wide distribution of incident angles may be caused corporately by sand-bed collision, mid-air collision of sand and turbulence of boundary layer. The proportion that angles of 5°–15° occupy is far below previous reports. The measuring height is probably the most important reason for the measurement differences between our results and published data. The measured results along with the height provide us the reasons why previous studies showed the means of incident angle varied among 10°–20° and most of incident angles distributed between 5°–15°. The incident angle could be regarded as the function of incident speeds and wind strengths. Although the proportion of 5°–15° incident angles is low, however, the importance of small incident angles is undoubted. We could not make sure the contribution of small incident angle to the ejection of particles quantitatively. More systematical measurements are expected to determine the role of small incident angle in wind-blown sand. Besides, since the incident angles are positively related to the release of mineral dust [32] and the abrasion of land surface [33], the study of this work may be helpful to improve the understanding of these aspects in aeolian research.


Supporting Information File S1

This file contains Figure A, Figure B and Table S1. Figure A shows the set of anemometer in the wind tunnel. Figure B says the vertical profiles of time-averaged stream-wise velocity. Table S1 tells the fitting parameters of the distributions of incident angles.

(DOC)


Click here for additional data file (pone.0067935.s001.doc)

File S2

This file contains experimental data of seven measured conditions. These data files are named as “S-experimental data”. The S-experimental data 1–1 is measured with friction wind speed u* = 0.30 m/s and the measuring height z = 2 mm. The S-experimental data 2-1, 2-2, 2-3, 2-4 and 2-5 are measured at z = 2, 4, 6, 8 and 10 mm, respectively, with the same u* = 0.39 m/s. The S-experimental data 3-1 is measured with u* = 0.48 m/s and z = 2 mm.

(RAR)


Click here for additional data file (pone.0067935.s002.rar)


The authors express their sincere appreciation to Qing-Chun Li for his help during our experiments.


References
1. Bagnold RA (1941) The physics of blown sand and desert dunes. London: Methuen.
2. Zheng XJ (2009) Mechanics of Wind-blown Sand Movements. Berlin: Springer.
3. Shao YP (2008) Physics and Modelling of Wind Erosion. Berlin: Springer.
4. Kok JF, (Year: 2010) An improved parameterization of wind-blown sand flux on Mars that includes the effect of hysteresis. Geophys Res Lett37: L12202 doi:10.1029/2010GL043646.
5. Carneiro MV,, Pähtz T,, Herrmann HJ, (Year: 2011) Jump at the onset of saltation. Phys Rev Lett107(9): 09800121929270
6. Durán O,, Andreotti B,, Claudin P, (Year: 2012) Numerical simulation of turbulent sediment transport, from bed load to saltation. Phys Fluids24: 103306
7. Zheng XJ,, Xie L,, Zhou YH, (Year: 2005) Exploration of probability distribution of velocities of saltating sand particles based on the stochastic particle bed collisions. Phys Lett A341(1–4): 107–118
8. Anderson RS,, Haff PK, (Year: 1988) Simulation of eolian saltation. Science, 241(4867): 820–823 doi: 10.1126/science.241.4867.820.
9. McEwan IK, Willetts BB (1991) Numerical model of the saltation cloud. Acta Mech,1, 53–66.
10. Rice MA,, Willetts BB,, McEwan IK, (Year: 1995) An experimental study of multiple grain-size ejecta produced by collisions of saltating grains with a flat bed. Sedimentology, 42(4): 695–706 doi:10.1111/j.1365-3091.1995.tb00401.x.
11. Rice MA,, Willetts BB,, McEwan IK, (Year: 1996) Observations of collisions of saltating grains with a granular bed from high-speed cine-film. Sedimentology43(1): 21–31 doi:10.1111/j.1365-3091.1996.tb01456.x.
12. Ammi M,, Oger L,, Beladjine D,, Valance A, (Year: 2009) Three-dimensional analysis of the collision process of a bead on a granular packing. Phys Rev E79(2): 021305
13. Kok JF,, Renno NO, (Year: 2009) A comprehensive numerical model of steady state saltation (COMSALT). J Geophys Res114: D17204 doi: 10.1029/2009 JD011702.
14. Willetts BB,, Rice MA, (Year: 1989) Collisions of quartz grains with a sand bed–the influence of incident angle. Earth Surf Process Landf14(8): 719–730 doi:10.1002/esp.3290140806.
15. Werner BT, (Year: 1990) A steady-state model of wind-blown sand transport. J Geol98(1): 1–17
16. White BR,, Schulz JC, (Year: 1977) Magnus effect in saltation. J Fluid Mech81(3): 497–512 doi: 10.1017/S0022112077002183.
17. Willetts BB,, Rice MA, (Year: 1986) Collisions in aeolian saltation. Acta Mech63(1–4): 255–265 doi: 10.1007/BF01182552.
18. Nalpanis J,, Hunt JCR,, Barrett CF, (Year: 1993) Saltating particles over flat beds. J Fluid Mech251: 661–685 doi: 10.1017/S0022112093003568.
19. Jensen JL,, Sorensen M, (Year: 1986) Estimation of some aeolian transport parameters: a reanalysis of Williams’ data. Sedimentology33: 547–558
20. Dong ZB,, Liu XP,, Li F,, Wang HT,, Zhao AG, (Year: 2002) Impact- entrainment relationship in a saltating cloud. Earth Surf Process Landf27(6): 641–658
21. Kang LQ,, Guo LJ,, Liu DY, (Year: 2008) Experimental investigation of particle velocity distributions in windblown sand movement. Science in China Series G:Physics, Mechanics and Astronomy51(8): 986–1000
22. Rasmussen KR,, Sorensen M, (Year: 2008) Vertical variation of particle speed and flux density in aeolian saltation: Measurement and modeling. J Geophys Res113: F02S12 doi: 10.1029/2007JF000774.
23. Tong D,, Huang N, (Year: 2012) Numerical simulation of saltating particles in atmospheric boundary layer over flat bed and sand ripples. J Geophys Res117: D16205 doi:10.1029/2011JD017424.
24. Rasmussen KR,, Kok JF,, Merrison JP, (Year: 2009) Enhancement in wind-driven sand transport by electric fields. Planet Space Sci57(7): 804–808
25. Creyssels M,, Dupont P,, Ould El Moctar A,, Valance A,, Cantat I,, et al. (Year: 2009) Saltating particles in a turbulent boundary layer:Experiment and theory. J Fluid Mech625: 47–74 doi:10.1017/S0022112008005491.
26. Gordon M,, McKenna Neuman C, (Year: 2009) A study of particle splash on developing ripple forms for two bed materials. Geomorphology129: 79–91 doi:10.1016/j. geomorph.2011.01.015.
27. Huang N,, Zhang Y,, D’Adamo R, (Year: 2007) A model of the trajectories and midair collision probabilities of sand particles in a steady state saltation cloud. J Geophys Res112: D08206 doi: 10.1029/2006JD007480.
28. Li B,, McKenna Neuman C, (Year: 2012) Boundary-layer turbulence characteristics during aeolian saltation. Geophys Res Lett39: L11402 doi: 10.1029/2012GL 052234.
29. Pähtz T,, Kok JF,, Herrmann HJ, (Year: 2012) The apparent roughness of a sand surface blown by wind from an analytical model of saltation. New J Phys14: 043035
30. Beladjine D,, Ammi M,, Oger L,, Valance A, (Year: 2007) Collision process between an incident bead and a three-dimensional granular packing. Phys Rev E75(6): 061305
31. Oger L,, Ammi M,, Valance A,, Beladjine D, (Year: 2008) Study of the collision of one rapid sphere on 3D packings: Experimental and numerical results. Comput Math Appl55(2): 132–148
32. Lu H,, Shao Y, (Year: 1999) A new model for dust emission by saltation bombardment. J Geophys Res104(D14): 16827–16842 doi: 10.1029/1999JD 900169.
33. Wang ZT,, Zhou YH,, Zheng XJ, (Year: 2006) Tensile test of natural microbiotic crust. Catena67(2): 139–143

Figures

[Figure ID: pone-0067935-g001]
doi: 10.1371/journal.pone.0067935.g001.
Figure 1  A sketch of incident angle.

x and z represent the stream-wise and the vertical direction, respectively. θ is the incident angle. (a) shows the case of θ∈[0°,90°) and (b) tells the case of θ∈[90°,180°].



[Figure ID: pone-0067935-g002]
doi: 10.1371/journal.pone.0067935.g002.
Figure 2  The diagrammatic sketch of wind tunnel experiment design.

① and ② are triangular turbulence spires and solid roughness elements respectively. ③ represents the sand supply system. ④ is the central axis line of wind tunnel. ⑤, ⑥, ⑦ and ⑧ represent the sand bed, CCD camera, laser generator and reflecting mirror respectively.



[Figure ID: pone-0067935-g003]
doi: 10.1371/journal.pone.0067935.g003.
Figure 3  Part of an example image pair.

(a) shows the former image in a pair and (b) reveals the latter one. In the image, the white spots represent the particles flying in the air.



[Figure ID: pone-0067935-g004]
doi: 10.1371/journal.pone.0067935.g004.
Figure 4  The population distributions of incident angles in different wind strengths (a) and measuring height (b).

[Figure ID: pone-0067935-g005]
doi: 10.1371/journal.pone.0067935.g005.
Figure 5  The mean incident angle and the proportion of 5°–15° incident angles ( ) in different wind strengths (a) and measuring height (b).

The diamond and the star symbols represent the mean incident angle and , respectively.



[Figure ID: pone-0067935-g006]
doi: 10.1371/journal.pone.0067935.g006.
Figure 6  The distributions of incident angles of different particle speeds for a fixed wind strength (a) and of different wind strengths for a fixed particle speed (b).

[Figure ID: pone-0067935-g007]
doi: 10.1371/journal.pone.0067935.g007.
Figure 7  The mean incident angle (a) and the proportion of 5°–15° incident angles ( ) (b) versus resultant incident speeds of particles.

Article Categories:
  • Research Article
Article Categories:
  • Earth Sciences
    • Atmospheric Science
    • Environmental Sciences
      • Environmental Engineering
    • Geography
      • Geomorphology
        • Erosion
    • Geology
    • Geomorphology
      • Erosion
    • Geophysics
Article Categories:
  • Engineering
    • Civil Engineering
      • Geotechnical Engineering
    • Environmental Engineering


Previous Document:  Activating and relaxing music entrains the speed of beat synchronized walking.
Next Document:  CT Coronary Angiography Is Feasible for the Assessment of Coronary Artery Disease in Chronic Dialysi...