|Heart valve disease: investigation by cardiovascular magnetic resonance.|
|Jump to Full Text|
|PMID: 22260363 Owner: NLM Status: MEDLINE|
|Cardiovascular magnetic resonance (CMR) has become a valuable investigative tool in many areas of cardiac medicine. Its value in heart valve disease is less well appreciated however, particularly as echocardiography is a powerful and widely available technique in valve disease. This review highlights the added value that CMR can bring in valve disease, complementing echocardiography in many areas, but it has also become the first-line investigation in some, such as pulmonary valve disease and assessing the right ventricle. CMR has many advantages, including the ability to image in any plane, which allows full visualisation of valves and their inflow/outflow tracts, direct measurement of valve area (particularly for stenotic valves), and characterisation of the associated great vessel anatomy (e.g. the aortic root and arch in aortic valve disease). A particular strength is the ability to quantify flow, which allows accurate measurement of regurgitation, cardiac shunt volumes/ratios and differential flow volumes (e.g. left and right pulmonary arteries). Quantification of ventricular volumes and mass is vital for determining the impact of valve disease on the heart, and CMR is the 'Gold standard' for this. Limitations of the technique include partial volume effects due to image slice thickness, and a low ability to identify small, highly mobile objects (such as vegetations) due to the need to acquire images over several cardiac cycles. The review examines the advantages and disadvantages of each imaging aspect in detail, and considers how CMR can be used optimally for each valve lesion.|
|Saul G Myerson|
Related Documents :
|22108733 - Arterial stiffness/elasticity in the contribution to progression of heart failure.
17215583 - Magnetic resonance imaging of ruptured plaques in the rabbit with ultrasmall superparam...
17171623 - High origin of a superficial ulnar artery arising from the axillary artery: anatomy, em...
|Type: Journal Article; Review Date: 2012-01-19|
|Title: Journal of cardiovascular magnetic resonance : official journal of the Society for Cardiovascular Magnetic Resonance Volume: 14 ISSN: 1532-429X ISO Abbreviation: J Cardiovasc Magn Reson Publication Date: 2012|
|Created Date: 2012-03-15 Completed Date: 2012-06-04 Revised Date: 2013-05-22|
Medline Journal Info:
|Nlm Unique ID: 9815616 Medline TA: J Cardiovasc Magn Reson Country: England|
|Languages: eng Pagination: 7 Citation Subset: IM|
|John Radcliffe Hospital, Oxford, UK. email@example.com|
|APA/MLA Format Download EndNote Download BibTex|
Heart Valve Diseases
Heart Valves / pathology*, physiopathology
Magnetic Resonance Imaging*
Predictive Value of Tests
Reproducibility of Results
Journal ID (nlm-ta): J Cardiovasc Magn Reson
Publisher: BioMed Central
Copyright ©2012 Myerson; licensee BioMed Central Ltd.
Received Day: 11 Month: 1 Year: 2012
Accepted Day: 19 Month: 1 Year: 2012
collection publication date: Year: 2012
Electronic publication date: Day: 19 Month: 1 Year: 2012
Volume: 14 Issue: 1
First Page: 7 Last Page: 7
Publisher Id: 1532-429X-14-7
PubMed Id: 22260363
|Heart valve disease: investigation by cardiovascular magnetic resonance|
|Saul G Myerson1||Email: firstname.lastname@example.org|
1Consultant Cardiologist, John Radcliffe Hospital, Honorary Senior Clinical Lecturer, University of Oxford Centre for Clinical Magnetic Resonance Research, Oxford, UK
Cardiovascular magnetic resonance (CMR) has unique capabilities which can greatly benefit the assessment of the patient with cardiac valve disease. While echocardiography (echo) remains the major imaging modality for assessing valve disease, there are many areas where CMR provides 'added value' to existing assessment and can complement the echo assessment. CMR can also provide a comprehensive 'stand-alone' assessment in some situations, delivering optimal assessment of patients using a combination of several techniques. These include quantifying the severity of the valve lesion, determining aetiology, examining the consequences for the relevant ventricle, and assessment of the surrounding anatomy (e.g. aortic root). Additional information on great vessel anatomy and the presence of myocardial scar (infarction) can also be clinically useful. The modality is used best by harnessing the advantages it brings, rather than attempting to replicate echocardiography or x-ray computed tomography (CT). This review will highlight the optimal use of CMR in valve disease, highlighting the strengths of the technique and also the potential pitfalls when assessing patients with valve disease.
Most morphological and functional information is obtained using cine CMR sequences, particularly steady state free-precession (SSFP) sequences with their high contrast between blood pool and surrounding structures (Figure 1). These have largely replaced spoiled gradient echo sequences, though the latter remain useful on occasions for visualising the extent of flow disturbance in selected cases. The ability to image in any plane allows clear views of all four cardiac valves and their inflow/outflow tracts, irrespective of thoracic anatomy or difficult cardiac anatomy. This is particularly useful for right-sided valves which can be challenging to visualise with echo, particularly the pulmonary valve. An additional advantage is that it facilitates direct measurement of valve orifice area for stenosed valves by planimetry rather than calculation , and the same technique can occasionally be used for the assessment of regurgitant orifices if required. The anatomical information from CMR cine images can be at least as good as transoesophageal echocardiography, and valvar anatomy and function can often be visualised well with cine images, along with the mechanism of regurgitation, particularly with thin (4-5 mm) slices. There are however several limitations of CMR cine assessment, including a relatively thick imaging slice (typically 5-8 mm) resulting in partial volume effects, and the need to acquire cine images over several cardiac cycles which results in sub-optimal visualisation of small or more chaotically mobile objects such as vegetations. The thin nature of cardiac valves (typically 1-2 mm) makes them particularly prone to partial volume effects due to the slice thickness of CMR images. Care is therefore required in placing image slices perpendicular to the valve plane to minimise these effects and in minimising slice thickness to 4-5 mm, but some aspects of finer valve anatomy may be too difficult to visualise well with CMR. Furthermore, for accurate assessment of the stenotic/regurgitant orifice, positioning the image slice precisely at the valve tips is important and misalignment may result in significant error. Multiple parallel thin image slices in the plane of interest can help to locate the one slice at the optimal position of the valve tips.
The visual assessment of turbulent flow in stenotic or regurgitant flow jets is also feasible with the cine sequences described above, through visualisation of signal voids due to spin dephasing in moving protons . Flow related signal loss seen on SSFP images occurs where voxels span a range of velocities, notably in the shear layers that can surround the more coherent jet core. The location and direction of regurgitant or stenotic jets can be assessed (Figure 2), which can provide valuable information about the valve lesion. In regurgitant jets, the width of the jet origin and/or the vena contracta provide useful information, with milder leaks having narrower jets in general. Lastly, the cine-visualised flow jets can also assist in planning the placement of subsequent velocity-encoded images. Signal voids seen on SSFP imaging are however substantially related to the acceleration of blood rather than the velocity alone, and may underestimate the degree of flow disturbance when assessing the degree of regurgitation. Narrow (mild) jets may be difficult to visualise due to the lack of shear layers at the edge of the jet. Gradient echo sequences are more sensitive than SSFP sequences for evaluating the presence and magnitude of turbulent jets , and this sensitivity is increased with lengthening echo time [4,5]. Assessing the severity of regurgitation with visual assessment of cine images requires care and caution however, as the technique is subject to slice positioning, partial volume effects, the insensitivity of SSFP sequences, and to other sequence parameters. This method can provide an approximate guide to the degree of regurgitation, and distinguishing mild and severe regurgitation is feasible, but finer differentiation of severity is rarely possible.
Accurate measurement of left and right ventricular volumes, function and mass are vital for assessing the impact of valve lesions on the ventricles. Excessive dilation or reduced ventricular function are strong indicators of a poor prognosis , and reliable measurement is important. CMR is the most accurate and reproducible technique for assessing both left and right ventricular volumes & mass [7-9], and newer steady-state free-precession sequences appear to be even more accurate than older gradient echo cine sequences [10,11]. RV volumes are particularly useful as these are difficult to achieve by other methods, though accurate measurement is more difficult than for LV volumes. The role of left ventricular (LV) mass in valve disease has not been studied as extensively as volume, possibly due to the inaccuracies of measurement by M-mode or 2-dimensional echo , and LV mass may become a useful measure in the future, particularly for patients with aortic stenosis. Reproducibility is important for serial assessment of ventricular size, as patients with valve lesions are often monitored for many years if asymptomatic before symptoms and/or ventricular deterioration occur. CMR is highly reproducible , and being a 3-dimensional technique, is more sensitive to changes than one or two-dimensional LV diameters . CMR is also less prone than echocardiographic diameters to variations in measurement position, which can occur, despite standard guidelines . The accuracy of CMR is, however, dependent on correct placement of the basal ventricular image slice, and careful contour placement during post-processing is crucial, with correct differentiation of atrial and ventricular chambers, especially for the right ventricle. Significant error can occur if the basal slice is incorrectly included/excluded from ventricular volumes. Post-processing software that includes long axis visualisation of the valves to ensure appropriate slice inclusion significantly aids accuracy. CMR-derived ventricular stroke volumes can also be used to quantify mitral and tricuspid regurgitation, either in conjunction with flow measurement or with volume data alone if the valve regurgitation is isolated  - see below, but the issues about accuracy of contour placement still apply.
The ability to quantify flow directly using through-plane phase contrast velocity mapping  is a unique advantage of CMR, and does not rely on calculation from complex equations, as echo or invasive catheterisation techniques require. The technique exploits the property of protons moving in a magnetic field gradient, in which they acquire a shift in the phase of their rotational spin as compared with stationary protons, and the magnitude of this phase shift is proportional to their velocity. By producing images from the phase information, velocity can be measured , and is visually displayed in greyscale images (Figure 3a). Flow is derived from through-plane velocity maps by integrating the velocity of each pixel and its area over time, typically a single cardiac cycle (Figure 3b). CMR flow measurement shows good accuracy in in-vitro studies and it correlates well with invasive in-vivo measurements [18-22]. In vivo studies are hampered by the lack of a true 'gold standard' technique for comparison - invasive measures of flow rely on complex calculations and assumptions which may not hold true. The temporal resolution of CMR flow measurement is typically 25-45 msec, which is lower than for continuous wave Doppler velocity measurements in echo, but is good enough for most flow and velocity measurements. Flow measurement is however critically dependent on a homogenous magnetic field, and ensuring the image slice is at the magnet isocentre is important for minimising error. Despite this, phase offset errors due to eddy currents in the magnetic field can still occur, affecting background flow measurements. These are likely to be worse with newer breath-hold sequences due in part to faster gradient switching, and these sequences appear to have poorer accuracy than non-breath-hold sequences [23,24]. Background flow correction using phantoms can correct the majority of the error [23,24], and is important for accuracy . The majority of the validation work has been carried out using older non-breath-hold flow sequences, and these are recommended for accurate flow measurement due to the lower background offset error and better validation, particularly if phantom correction is not used. The background offset errors are also worse in very oblique imaging planes , and using imaging planes closer to the transverse body plane is helpful , where feasible.
Velocities can also be assessed with either 'through-plane' velocity mapping (as used for flow above) or 'in-plane' phase contrast sequences, measuring velocity within the plane of the slice (Figure 4). The in-plane sequences can demonstrate the origin and direction of a jet, and can be useful for visualising the site of stenosis and measuring velocity along the course of a jet, or can assist in planning the subsequent perpendicular or 'through-plane' slice. In-plane sequences may be less accurate however for measuring velocity in a stenotic lesion, particularly peak velocity, for a number of reasons. Due to the image slice thickness (typically 5-7 mm relative to a stenotic jet width of 2-4 mm), they are subject to partial volume effects, in which several velocities occur within a single voxel and an averaged phase shift is measured . The temporal resolution, while reasonable (typically 20-25 msec), is low when compared to fast-changing jet velocities (by comparison, continuous wave Doppler echo temporal resolution can be ~2 msec), and the true peak velocity may be missed. Lastly, the accuracy of CMR velocity measurement in high velocity jets is reduced, particularly with velocities above 3.5-4 m/sec [21,22]. This is due to signal loss from turbulence , and phase shift errors due to fast acceleration and intravoxel dephasing. Utilising sequences with a very short 'echo-time' (~2 msec) can reduce these errors  and future applications may use these 'ultra-short' echo time sequences. Narrow, high velocity flow jets (e.g. severe aortic stenosis) are thus especially affected, and the most severely stenotic jets may be too narrow and turbulent for accurate velocity measurement. Through-plane velocity mapping sequences may reduce some of the errors, particularly partial volume effects, as they take advantage of the better within-plane image resolution (typically ~1 mm), to cope with narrow jets. They are thus the preferred method for accurate velocity measurement, though the acceleration & turbulence errors still apply and the temporal resolution is similar. The highest velocity narrow jets may still be too difficult to measure however. Through-plane velocity measurement relies on the plane being placed at the site of maximal velocity (if peak velocity is desired), which is why in-plane velocity mapping to guide placement of the through-plane image can be helpful, unless the site of maximal velocity is predictable. Fortunately, background phase offset errors only result in a small change in the velocity of individual voxels (as opposed to moderate differences when summed for flow quantification), so do not substantially affect velocity measurement.
In addition to flow quantification, recently developed 3-dimensional in-plane CMR flow sequences can measure velocities in 3 dimensions simultaneously [27,28], allowing the visualisation of complex flow patterns. Future work may examine the utility of this technique for valve lesions and other areas of clinical utility.
The assessment of aortic stenosis is enhanced with CMR through accurate assessment of the anatomy of the valve and aortic root, quantification of LV mass and function to indicate the precise effect on the LV, and measurement of the velocity of the stenotic jet where this is difficult with echo. The excellent visualisation of anatomy provided by CMR allows accurate evaluation of the severity of aortic stenosis , usually starting with standard and 'coronal' LV outflow tract views (Figure 5), from which a good qualitative assessment of the valve can be made. Direct planimetry of the aortic valve orifice is the most useful technique for quantifying stenosis severity, achieved by placing an imaging plane through the valve tips in systole (Figure 6). It is important however to ensure the image slice is thin (4-5 mm) and precisely at the valve tips, and acquiring multiple parallel thin slices parallel to the valve orifice may aid in identifying the true orifice . This technique agrees well withmeasured aortic valve area on transoesophageal echocardiography [30-32] and also with estimated valve area from the continuity equation [31,32]. Trans-valvar velocity can be measured withvelocity mapping [33,34], though peak velocity may be less accurate (often underestimated) compared to continuous wave Doppler echo, due to the small width of very high velocity jets (partial volume effects), lower temporal resolution, and artefacts from turbulent jets, as indicated earlier. For these reasons, direct planimetry of the valve orifice area may be a more reliable assessment of aortic stenosis with CMR. It has been suggested that the continuity equation could be used with CMR to estimate valve area , with direct measurement of the LVOT area being an advantage over echo. However, this is unnecessary when CMR can directly measure the valve area itself, and the continuity equation relies on multiple measurements and an equation to calculate (rather than directly measure) the valve area, all of which increase the potential for error.
Despite the limitations, CMR measurement of velocity is advantageous in angulated roots where correct echo beam alignment with the stenotic jet is difficult. In addition, many stenotic jets are not parallel to the LV outflow tract, and are also inaccurately assessed with echo, even when outflow tract visualisation is good. In-plane velocity mapping in the outflow tract is useful to identify the location of maximal velocity - this is usually just distal to the valve tips in valvar stenosis. This can be followed with through plane velocity mapping in a plane perpendicular to the direction of flow, positioned at the identified location of maximal velocity (Figure 1). This combination reduces partial volume effects while ensuring the peak velocity is measured, and mean velocity can also be assessed from the through-plane velocity measurements. Ensuring the correct slice position for flow measurement is important for accuracy; and although this image appears similar to that through the valve tips, the position of maximal velocity (the vena contracta) usually lies a few millimetres distal to the valve tips, so the images may not be in identical locations.
Other advantages in aortic stenosis include the ability to differentiate sub-valvar and supra-valvar stenosis, which are easily visualised with CMR cine imaging, and the site of velocity acceleration can be accurately located with in-plane velocity mapping. CMR can also accurately assess the ascending aorta, which may be dilated, particularly with bicuspid aortic valves, and may alter surgical management either at the time of valve replacement or by indicating that root ± valve replacement are required due to excess aortic dilation.
Highly accurate LV mass measurement provides a more precise and sensitive measure of the effect of aortic stenosis on the left ventricle than measuring myocardial wall thickness. LV mass has been a poorly examined parameter in aortic stenosis, likely due to the inaccuracies of echocardiographic M-mode measurement, and CMR-derived LV mass may prove to be a useful tool but needs further examination. Late gadolinium enhancement imaging in patients with aortic stenosis has shown patchy mid-wall enhancement in up to a third of patients with severe stenosis, usually in conjunction with significant LV hypertrophy, and often in the basal lateral wall . This likely reflects focal areas of fibrosis, which have also been shown in autopsy studies . Early reports have shown that this is associated with a worse prognosis . Future CMR techniques may include the assessment of diffuse fibrosis using T1 mapping and other CMR techniques, and this is likely to be an exciting area of development.
The advantages of CMR in aortic regurgitation are quantitation of the regurgitation and of LV volumes and function, particularly for serial measurement. Aortic regurgitation is difficult to quantify with echocardiography, which mostly relies on qualitative and semi-quantitative measures of severity. CMR can accurately quantify the amount of regurgitation using flow mapping, and derived values such as regurgitant fraction (regurgitant volume/forward volume × 100%) can be obtained. Imaging the valve occurs in much the same way as for aortic stenosis, using long axis LVOT views (Figure 7), from which qualitative visualisation of the regurgitation can be performed (Figure 2). Flow can be measured by placing the imaging slice for flow mapping just above the aortic valve, quantifying both forward and regurgitant flow per cardiac cycle [20,39,40] (Figure 3). Positioning the imaging slice just above the valve (rather than in the mid-ascending aorta) is important (Figure 7), despite the higher and more turbulent forward velocities encountered here, as underestimation of the regurgitation can occur otherwise . This is due to a number of factors, including movement of the valve towards the LV apex during systole which allows blood to flow into the gap between the imaging plane and the valve. This blood may return to the ventricle during diastole and not flow through the imaging plane, thus being lost to measurement (Figure 8). This tendency is exacerbated by several factors: aortic distension during systole, a dilated aortic root (resulting in greater volume between the imaging plane and the valve), and vigorous longitudinal contraction of the LV (common in significant AR). Placing the plane closer to the valve minimises these errors, though avoiding the very highest turbulence at the valve tips themselves is wise. An ideal flow sequence would incorporate slice tracking to minimise these errors, which tracks the aortic valve and moves the imaging slice accordingly, but this involves complex software programming and has only been performed at a single centre so far .
The accuracy of aortic regurgitation quantification using CMR through-plane velocity mapping is excellent when compared to in-vitro studies  or in-vivo CMR measurement using the difference between ventricular volumes , and it correlates well with angiographic or echocardiographic grades of severity [18,20,40]. As it remains the only technique capable of true in-vivo quantification of aortic regurgitation (without calculation), there is no 'Gold standard' for comparison of accuracy. Reproducibility is also good, both for inter-study and intra/inter observer comparisons [39,40]. The technique is however subject to the same potential problems as all flow techniques, highlighted earlier (under 'flow and velocity quantification'), and care is required to ensure good accuracy of the measurements. In particular, non-breath-hold flow sequences are recommended for their lower background flow offset errors. Quantifying AR with CMR has recently shown a good ability to predict symptom development and the need for valve replacement surgery in the near future , with a regurgitant fraction > 33% providing the optimal threshold for identifying patients likely to require surgery within a few years. Given the difficulty in timing valve replacement surgery in patients with severe AR , this may become a valuable tool in clinical management, with the potential to identify suitable patients for early surgery. The potential improvement in outcome requires confirmation in a clinical trial however.
AR quantification can also be achieved by a comparison of the differences in LV and RV stroke volume from cine imaging alone , but this is less direct and relies on the lack of any other valve regurgitation or shunt. It also assumes accurate contour placement for volumetric assessment, and inaccuracies in measuring any of the four sets of contours (LV and RV in both diastole and systole) can result in significant errors. Careful contour placement is therefore required for this technique, particularly for the difficult RV contours. It is however a useful technique when flow quantification cannot be performed, or as an internal validation of the flow technique. An approximate assessment of the severity of aortic regurgitation can also be obtained by visualisation of the signal void of the regurgitant jet on cine imaging. A narrow jet width at the origin suggests lower degrees of regurgitation, while a wide jet, particularly with a core of high signal from laminar flow, suggests more severe regurgitation. This method is subject to many potential errors however (indicated earlier), and is not recommended for accurate evaluation.
Accurate LV volumes with CMR can aid clinical assessment of the impact of AR, and the high reproducibility is particularly useful for serial assessment, which is important for the management of a condition that has a long asymptomatic phase. CMR-derived LV end-diastolic volumes have also shown some ability to predict the onset of symptoms or other indications for valve surgery , and although less strong than quantifying the regurgitation itself, it can provide a useful adjunct in predicting outcome. CMR can also provide a detailed assessment of aortic root anatomy, which can assist in identifying the cause of the regurgitation, and/or whether the root needs replacing at the time of valve replacement surgery.
Taken together, the many CMR techniques useful in AR, including regurgitation quantification, LV volumetric assessment and aortic root anatomy, make CMR the optimal tool for comprehensive assessment.
As for aortic regurgitation, the main advantages of CMR in mitral regurgitation are in quantitative assessment of both the regurgitation, and ventricular volume and function. CMR can also assess leaflet morphology and valve function, particularly utilising the free choice of image planes to characterise the aetiology of the regurgitation in this complex valve. CMR has good agreement with trans-oesophageal echocardiography for assessing mitral valves for repair , though the slice thickness can result in partial volume errors more frequently than echocardiography, which has a very narrow beam width. A good method is to place multiple cine images perpendicular to the mitral valve commissure, facilitating assessment of the individual scallops/coaption, and can identify the site of localised prolapse/regurgitation . This technique can be modified by placing three slices specifically across the commissure, perpendicular to the edge of the leaflet at each of the scallops (Figure 9). This results in reduced partial volume effects in the A1/P1 and A3/P3 views particularly, while also being marginally quicker. Despite these good techniques, transoesophageal echocardiography is likely to remain the optimal investigation for leaflet assessment, due to its superior leaflet detail and potential 3-dimensional images. CMR could be used if trans-oesophageal echocardiography wasn't possible, if doubts remained after the echocardiogram, or if other aspects required assessment by CMR and all could be investigated by a single CMR scan. CMR can also be valuable in assessing the regurgitant orifice using thin (4-5 mm) slices parallel to the mitral annulus, carefully placed through the mitral tips in systole . In some patients this can provide direct visualisation and measurement (if required) of the regurgitant orifice area (rather than calculated area from echocardiography), but the complex shape and motion of the valve mean this is not feasible in all patients.
Quantification of mitral regurgitation is usually performed indirectly, mostly by subtracting aortic systolic flow (measured by aortic flow mapping described above) from LV stroke volume . This relies on a combination of two different MR techniques and increases the potential for measurement error, so care is required with the flow sequence and LV contours, as previously highlighted. Mitral regurgitation can also be quantified by comparing the difference in ventricular stroke volumes, as for aortic regurgitation, but the same limitations apply, including the assumption of a single valve lesion and the need for accurate contour placement. The quantification of mitral regurgitation correlates well with echocardiographic and angiographic assessmentand has good reproducibility [49-51]. The potential clinical utility of quantification is shown by the good ability to predict the future need for surgery in asymptomatic patients , similarly to aortic regurgitation, with a regurgitant fraction of 40% providing the optimal threshold for MR. Although this prognostic ability was not quite as strong as for aortic regurgitation, it is significantly greater than echocardiographic semi-quantitation using the proximal isovolumetric surface area (PISA) technique for estimating mitral regurgitant orifice area . Quantitative CMR measures may become a valuable clinical tool to identify suitable patients for early valve surgery, as for aortic regurgitation, though again clinical trials are required to determine if this potential for identifying patients for early surgery translates into improved clinical outcomes. Direct quantification of the regurgitation using CMR is possible using through-plane flow mapping on the atrial side of the mitral valve  (Figure 10), but is difficult due to the highly mobile valve and often eccentric, mobile jets of regurgitation. Despite these difficulties, it has reasonable agreement with indirect quantification and can provide an alternative method. Atrial fibrillation is more common in patients with mitral regurgitation, and this can reduce the accuracy of flow measurements , but is improved if the heart rate variability is low .
Similarly to AR, an approximate assessment of the severity of mitral regurgitation can be obtained by visualisation of the signal void of the regurgitant jet on cine imaging, with a narrow jet width suggestinglower degrees of regurgitation and a wide jet (particularly with a core of high signal) suggesting more severe regurgitation. However, the same limitations apply, and this method is only useful as a rough guide.
Echocardiography, particularly trans-oesophageal echocardiography, remains the first line technique for assessing mitral stenosis due to its excellent visualisation of the mitral leaflets. CMR can be helpful in selected cases however, with good visualisation of the restricted mitral leaflets, particularly on the LVOT view. Direct measurement of the orifice area can be performed in much the same way as for aortic stenosis, by placing an imaging plane at the mitral valve tips during diastole (Figure 11). The technique has good agreement with echocardiography , but care needs to be taken in positioning the plane at the tips in order to obtain an accurate valve area, and multiple parallel thin slices may be helpful. Diastolic flow and velocity can also be measured in this image plane, and pressure half time calculated as for echocardiography , though the frequency of atrial fibrillation in severe mitral stenosis reduces the accuracy of the flow measurements .
The pulmonary valve and right ventricular outflow tract can be difficult to assess with echo, due to several factors. The location of the valve and outflow tract immediately behind the sternum makes it difficult to position the echo probe adequately to visualise the area. The qualitative echo assessment of pulmonary regurgitation is also less robust than for aortic regurgitation, and grading regurgitation severity can be difficult. Thirdly, the right ventricle can be difficult to assess, particularly for volumetric assessment, due to its unusual shape. CMR is therefore particularly valuable for assessing the pulmonary valve, with its combination of free choice of imaging planes, velocity & flow assessment, and accurate assessment of RV anatomy and volumes. Despite the very thin nature of the normal pulmonary valve, making it difficult to visualise with CMR, these other advantages are considerable, and CMR should be considered the 'Gold standard' for assessment of the pulmonary valve and RV outflow tract.
The excellent visualisation of the RV outflow tract with CMR facilitates easy identification of the site and severity of pulmonary stenosis. An RV outflow tract view (usually an oblique sagittal plane), including the proximal pulmonary trunk and a very fore-shortened right ventricle, is ideal (Figure 12). Care is required however to ensure the outflow tract remains in the plane during the whole cardiac cycle, due to the significant long axis motion of the RV. Acquiring a cine image in a more horizontal plane through the RVOT, perpendicular to the first (imperfect) RVOT view, can help plan a subsequent improved RVOT view throughout the whole cardiac cycle. A qualitative assessment of severity can be made from the cine views, by visualising the valve motion and stenotic jet. Quantitative assessment is similar to that for aortic stenosis, and direct planimetry of the valve orifice from a cine image through the valve tips is the preferred method for assessing severity. Peak velocity can also be measured, as for aortic stenosis, though has similar limitations, particularly for high velocity jets. Identifying sub-valvar and supra-valvar stenosis is straightforward with the long axis views through the outflow tract, and in-plane velocity mapping in these planes can be helpful in identifying the point of maximal velocity where doubt remains. Lastly, RV mass and function can be assessed to determine the effect on the RV, and any concomitant pulmonary trunk or branch artery stenosis can be identified with either a thin-slice SSFP anatomical stack or MR angiography of the pulmonary arteries.
Trivial or mild pulmonary regurgitation (PR) is common in normal subjects (~30% of the population ), but rarely of importance. More significant degrees of regurgitation are usually related to congenital heart disease, with the largest group being patients with repaired tetralogy of Fallot, who commonly have significant residual PR [58-60]. CMR has revolutionised the investigation and follow up of such patients, as it accurately assesses two important aspects - the quantity of regurgitation and RV volumes/function , and is the method of choice for examining PR in this patient group.
The assessment is similar in general to aortic regurgitation. RV outflow tract cine images can give an idea of anatomy, but as pulmonary pressures are lower than systemic, the degree of turbulence from PR is often lower and may be poorly visualised on cine images, especially SSFP (Figure 13). In-plane phase contrast velocity mapping sequences are better for visualising the regurgitant jet (Figure 13). Accurate quantification can be performed using through-plane velocity mapping, with the image slice placed just above the pulmonary valve (Figure 13). This method compares well to quantification by comparing ventricular stroke volumes , correlates with echocardiographic parameters , and a regurgitant fraction ≥40% has been considered severe . Measuring pulmonary flow is especially susceptible to the problems of background flow offset errors however , and attempts should be made to minimise these wherever possible. This includes choosing image planes close to the transverse view (where appropriate), non-breath-hold flow sequences, and background correction where possible. Accurate measurement of RV volumes and function are particularly important, and can help guide the timing of valve replacement [60,63]. Excess RV volume loading can also be inferred from abnormal diastolic motion of the ventricular septum towards the LV in diastole, best appreciated on short axis ventricular cine images. The optimal CMR thresholds for recommending surgery are uncertain, but in adults with severe chronic PR following tetralogy of Fallot repair, a recent retrospective study noted that an RV end-diastolic volume index < 160 mL/m2 resulted in a greater chance of normalisation of RV dimensions after pulmonic valve replacement . Studies to assess the optimal clinical use of CMR quantification and the optimal thresholds for intervention are on-going, and may ultimately reduce the long term RV dysfunction that can result [60,65].
Percutaneous pulmonary valve replacement using a stent-valve is increasing in popularity, and accurate sizing and anatomy of the pulmonary outflow tract is important for determining suitable patients [66,67]. CMR provides the required detail, in addition to accurate assessment of the valve lesion itself, and is invaluable in the assessment of patients for this procedure . Despite the metal content of the stents, follow-up flow imaging can still occur above & below the stent, and some newer nitinol stents can allow flow assessment within the stent , though the accuracy is more uncertain.
CMR offers similar capabilities for the assessment of tricuspid regurgitation (TR) as for mitral regurgitation. SSFP cine sequences are used to visualise the anatomy and function of the leaflets. The horizontal long axis view provides a good overview, but multiple contiguous transverse images through the valve can often provide additional useful information, particularly for abnormal leaflet morphology such as in Ebstein's anomaly. Visualising the jet is difficult on SSFP sequences due to the lower shear and turbulence, but qualitative assessment of the TR jet can be achieved with in-plane velocity mapping in a long axis RV view (Figure 14). Wider jets (especially > 7 mm at the vena contracta) suggest more severe tricuspid regurgitation. The regurgitant orifice can sometimes be assessed directly, in a similar fashion to mitral regurgitation, with a cine image through the leaflet tips in systole (Figure 15). Through-plane velocity mapping in this plane can also aid in visualising the size of the regurgitant orifice by visualising the flow jet in cross section. This allows assessment of the regurgitant orifice area, though thresholds for guiding severity grading are not yet available. The 'diameter' of the regurgitant orifice can be assessed (as per echo protocols) but this is only an approximate guide as the regurgitant orifice is often non-circular. Again, this may be inferior to quantification of the regurgitation.
Quantification can be achieved using pulmonary flow measurement (as acquired for pulmonary regurgitation), combined with RV stroke volume to calculate the regurgitant volume (= RV stroke volume - pulmonary forward flow) and the regurgitant fraction (TR/RV stroke volumes × 100%) , in much the same way as for mitral regurgitation. The same limitations apply, as combination MR techniques are used to calculate regurgitation quantity, and care is required with both the flow sequence and RV contouring, which can be especially difficult. Accuracy of the flow sequence in particular is also reduced in very irregular rhythms - not uncommon with TR. Quantifying the TR can also be assessed using the difference in ventricular stroke volumes if only a single valve leak is present , with the same issues about the need for accurate contour placement as in MR.
Patients with abnormal placement of the tricuspid valve (Ebstein's anomaly) often present a challenge for assessing true RV volumes & function, as well as the extent of tricuspid regurgitation, due to the difficulty of identifying the true ventricle on short axis images. Good post-processing software which allows identification of the valve position in the long axis views can help considerably with this, and CMR can produce accurate assessments which aid management [71,72].
Although extremely rare, and not routinely assessed with CMR, this valve lesion can be examined when required. Valve area can be measured by placement of an image slice through the valve tips in diastole, as for mitral stenosis, and forward velocity through the valve can be measured, though this parameter is perhaps less useful.
CMR can be used to assess patients with multiple valve lesions, obtaining a detailed assessment of the severity of each component whether these occur in the same valve (i.e. mixed valve disease) or in different valves. As an extreme example, a patient with both mixed aortic and mixed mitral valve disease could have the opening area of each valve measured by direct planimetry with cine imaging to assess stenosis, the aortic regurgitation quantified from the diastolic (regurgitant) flow above the aortic valve and the mitral regurgitation quantified by subtracting the systolic (forward) flow above the aortic valve from the LV stroke volume. LV volumes and function would also be assessed. In this way, a comprehensive assessment can be undertaken.
Despite perceived contraindications, all prosthetic heart valves are safe in the MR scanner at 1.5 T and the vast majority are safe at 3T (not all have been tested) [73,74]. Even for mildly ferromagnetic valves, the forces exerted on the valve by the scanner are negligible when compared to those occurring with each heart-beat. Most valves produce an artefact, though the size is variable - bi-leaflet tilting discs have a smaller artefact than older ball & cage valves, though some bioprosthetic valves have significant amounts of metal in the frame which can produce a larger artefact. Prosthetic heart valves can even be assessed using CMR, including flow patterns and anatomy around the valve [75,76] (Figure 16). Some bioprosthetic valves can have the opening of the leaflets assessed by SSFP cine imaging with good accuracy , though not all are amenable to this. The leaflet motion of mechanical valves is not usually amenable to CMR visualisation due to the considerable artefact and the lack of signal from the valve leaflets. However, reasonable visualisation of leaflet motion can sometimes be obtained in some tilting disc valves with careful image positioning perpendicular to the leaflet hinge line. The motion of the discs may be seen from the moving signal void, but this technique is far less precise than x-ray fluoroscopy. The flow pattern of prosthetic valves can however usually be assessed using through-plane velocity mapping, with the image slice placed downstream of the signal void artefact. Bioprosthetic valves have a central flow jet similar to native aortic valves, while bi-leaflet tilting disc valves have a characteristic flow pattern (Figure 17), reminiscent of the profile of a Star Wars™ TIE (Twin Ion Engine) fighter.
Prosthetic valve dysfunction can also be assessed. If one leaflet of a bi-leaflet tilting disc valve fails to open properly, one side of the flow pattern will be missing and this may be identified with CMR. Paraprosthetic leaks can be visualised with careful image positioning, and can even be quantified with careful through-plane velocity mapping. While less conventional than other imaging modalities, these techniques can be extremely helpful in selected patients. CMR is also particularly good for assessing the anatomy of the aortic root around the valve, including grafts and valve-graft conduits, and any dissection or false aneurysm that may be present.
Irregular cardiac rhythms degrade image quality, which affects the assessment of ventricular function, though the effect on this is usually small. The accuracy of flow measurement can also be reduced  as flow sequences are acquired over several cardiac cycles (typically 10-12), with data acquired in a complex manner, and reconstructed based on the assumption of a regular rhythm. In subjects with an irregular rhythm, the complexity of the data acquisition means that although acquired over several cardiac cycles, flow is not averaged over these, as might be expected. Where the beat-to-beat variability is small (e.g. atrial fibrillation with a controlled rate), these errors are usually not clinically significant . Very irregular rhythms however (e.g. uncontrolled atrial fibrillation, multiple ventricular ectopics) can present a challenge, particularly to acquiring accurate flow data. Intelligent planning of the timing of data acquisition to the ECG can offset some of the problems, but some patients still present a challenge and caution should be exercised in interpreting the flow data in these. Cine imaging may be more reliable as it is more amenable to intelligent ECG gating and is less affected by arrhythmias, particularly during systole. Ventricular volumes vary with differing heart rates due to differential filling, and these physiological changes do of course still occur, and result in slight blurring of the myocardial borders. The result is an approximate averaging of the volumes over the several cardiac cycles of image acquisition, which is usually acceptable. Flow imaging may be improved with the newer ECG gating techniques for arrhythmias, which typically omit cardiac cycles outside a defined range.
One limitation that remains with CMR is the inability to measure directly the pressure inside a vessel or cardiac chamber - a limitation of all imaging modalities. As for echocardiography, CMR can measure velocity across a stenosis and derive a pressure drop from this, but absolute pressure quantification remains elusive. Cardiac catheterisation remains the most accurate method for assessing this. One paper has identified how CMR may indirectly indicate pressure, by examining the complex flow patterns in the pulmonary artery using 3-dimensional flow imaging . The paper suggested that pulmonary pressure (measured invasively) was strongly linked with the type of flow pattern in the main pulmonary artery. The data requires further validation but indicates the novel approaches to assessment that CMR may bring in the future.
CMR can provide a comprehensive assessment of valvular heart disease, including quantification of valve regurgitation and other flows, and accurate cardiac volumes and mass for assessing the effect on both ventricles. Combined with the ability to image all areas of the heart (including difficult areas such as the right ventricle and pulmonary valve), it is an excellent adjunct to echocardiography for investigating patients with valve disease. Further studies of clinical outcome, using quantitative CMR data to guide management, are needed to enhance it as a strong tool for guiding clinical practice.
The author declares that they have no competing interests.
SGM has 15 year's experience of all areas of cardiovascular magnetic resonance, in addition to many years of echocardiography and clinical cardiology. He is the clinical lead for cardiac imaging in a major tertiary centre university hospital in Oxford, UK, and is part of Prof. Stefan Neubauer's acclaimed CMR research group. His clinical and research interests focus on valvular and aortic disease.
|Westermann Y,Geigenmuller A,Elgeti T,Wagner M,Dushe S,Borges AC,Dohmen PM,Hein PA,Lembcke A,Planimetry of the aortic valve orifice area: comparison of multislice spiral computed tomography and magnetic resonance imagingEur J RadiolYear: 20117742643510.1016/j.ejrad.2009.08.01419783394|
|Evans AJ,Blinder RA,Herfkens RJ,Spritzer CE,Kuethe DO,Fram EK,Hedlund LW,Effects of turbulence on signal intensity in gradient echo imagesInvest RadiolYear: 19882351251810.1097/00004424-198807000-000063170139|
|Krombach GA,Kuhl H,Bucker A,Mahnken AH,Spuntrup E,Lipke C,Schroder J,Gunther RW,Cine MR imaging of heart valve dysfunction with segmented true fast imaging with steady state free precessionJ Magn Reson ImagingYear: 200419596710.1002/jmri.1042814696221|
|Wagner S,Auffermann W,Buser P,Lim TH,Kircher B,Pflugfelder P,Higgins CB,Diagnostic accuracy and estimation of the severity of valvular regurgitation from the signal void on cine magnetic resonance imagesAm Heart JYear: 198911876076710.1016/0002-8703(89)90590-52801483|
|Suzuki J,Caputo GR,Kondo C,Higgins CB,Cine MR imaging of valvular heart disease: display and imaging parameters affect the size of the signal void caused by valvular regurgitationAJR Am J RoentgenolYear: 19901557237272119099|
|Bonow RO,Carabello BA,Chatterjee K,de Leon AC,Jr. Faxon DP,Freed MD,Gaasch WH,Lytle BW,Nishimura RA,O'Gara PT,O'Rourke RA,Otto CM,Shah PM,Shanewise JS,Smith SC Jr,Jacobs AK,Adams CD,Anderson JL,Antman EM,Fuster V,Halperin JL,Hiratzka LF,Hunt SA,Lytle BW,Nishimura R,Page RL,Riegel B,ACC/AHA 2006 guidelines for the management of patients with valvular heart disease: a report of the American College of Cardiology/American Heart Association Task Force on Practice Guidelines (writing Committee to Revise the 1998 guidelines for the management of patients with valvular heart disease) developed in collaboration with the Society of Cardiovascular Anesthesiologists endorsed by the Society for Cardiovascular Angiography and Interventions and the Society of Thoracic SurgeonsJ Am Coll CardiolYear: 200648e114810.1016/j.jacc.2006.05.02116875962|
|Bellenger NG,Burgess MI,Ray SG,Lahiri A,Coats AJ,Cleland JG,Pennell DJ,Comparison of left ventricular ejection fraction and volumes in heart failure by echocardiography, radionuclide ventriculography and cardiovascular magnetic resonance; are they interchangeable?Eur Heart JYear: 2000211387139610.1053/euhj.2000.201110952828|
|Myerson SG,Bellenger NG,Pennell DJ,Assessment of left ventricular mass by cardiovascular magnetic resonanceHypertensionYear: 20023975075510.1161/hy0302.10467411897757|
|Koch JA,Poll LW,Godehardt E,Korbmacher B,Modder U,Right and left ventricular volume measurements in an animal heart model in vitro: first experiences with cardiac MRI at 1.0 TEur RadiolYear: 20001045545810.1007/s00330005007510756995|
|Thiele H,Paetsch I,Schnackenburg B,Bornstedt A,Grebe O,Wellnhofer E,Schuler G,Fleck E,Nagel E,Improved accuracy of quantitative assessment of left ventricular volume and ejection fraction by geometric models with steady-state free precessionJ Cardiovasc Magn ResonYear: 2002432733910.1081/JCMR-12001329812234104|
|Ichikawa Y,Sakuma H,Kitagawa K,Ishida N,Takeda K,Uemura S,Motoyasu M,Nakano T,Nozaki A,Evaluation of left ventricular volumes and ejection fraction using fast steady-state cine MR imaging: comparison with left ventricular angiographyJ Cardiovasc Magn ResonYear: 2003533334210.1081/JCMR-12001942212765112|
|Myerson SG,Montgomery HE,World MJ,Pennell DJ,Left ventricular mass: reliability of M-mode and 2-dimensional echocardiographic formulasHypertensionYear: 20024067367810.1161/01.HYP.0000036401.99908.DB12411461|
|Grothues F,Smith GC,Moon JC,Bellenger NG,Collins P,Klein HU,Pennell DJ,Comparison of interstudy reproducibility of cardiovascular magnetic resonance with two-dimensional echocardiography in normal subjects and in patients with heart failure or left ventricular hypertrophyAm J CardiolYear: 200290293410.1016/S0002-9149(02)02381-012088775|
|Cheitlin MD,Armstrong WF,Aurigemma GP,Beller GA,Bierman FZ,Davis JL,Douglas PS,Faxon DP,Gillam LD,Kimball TR,Kussmaul WG,Pearlman AS,Philbrick JT,Rakowski H,Thys DM,Antman EM,Smith SC Jr,Alpert JS,Gregoratos G,Anderson JL,Hiratzka LF,Faxon DP,Hunt SA,Fuster V,Jacobs AK,Gibbons RJ,Russell RO,ACC/AHA/ASE 2003 Guideline Update for the Clinical Application of Echocardiography: summary article. A report of the American College of Cardiology/American Heart Association Task Force on Practice Guidelines (ACC/AHA/ASE Committee to Update the 1997 Guidelines for the Clinical Application of Echocardiography)J Am Soc EchocardiogrYear: 2003161091111014566308|
|Globits S,Frank H,Mayr H,Neuhold A,Glogar D,Quantitative assessment of aortic regurgitation by magnetic resonance imagingEur Heart JYear: 19921378831577036|
|Gatehouse PD,Keegan J,Crowe LA,Masood S,Mohiaddin RH,Kreitner KF,Firmin DN,Applications of phase-contrast flow and velocity imaging in cardiovascular MRIEur RadiolYear: 2005152172218410.1007/s00330-005-2829-316003509|
|Kilner PJ,Gatehouse PD,Firmin DN,Flow measurement by magnetic resonance: a unique asset worth optimisingJ Cardiovasc Magn ResonYear: 2007972372810.1080/1097664070146509017613655|
|Chatzimavroudis GP,Oshinski JN,Franch RH,Pettigrew RI,Walker PG,Yoganathan AP,Quantification of the aortic regurgitant volume with magnetic resonance phase velocity mapping: a clinical investigation of the importance of imaging slice locationJ Heart Valve DisYear: 19987941019502146|
|Hundley WG,Li HF,Hillis LD,Meshack BM,Lange RA,Willard JE,Landau C,Peshock RM,Quantitation of cardiac output with velocity-encoded, phase-difference magnetic resonance imagingAm J CardiolYear: 1995751250125510.1016/S0002-9149(99)80771-17778549|
|Sondergaard L,Lindvig K,Hildebrandt P,Thomsen C,Stahlberg F,Joen T,Henriksen O,Quantification of aortic regurgitation by magnetic resonance velocity mappingAm Heart JYear: 19931251081109010.1016/0002-8703(93)90117-R8465731|
|Sondergaard L,Thomsen C,Stahlberg F,Gymoese E,Lindvig K,Hildebrandt P,Henriksen O,Mitral and aortic valvular flow: quantification with MR phase mappingJ Magn Reson ImagingYear: 1992229530210.1002/jmri.18800203081627864|
|O'Brien KR,Cowan BR,Jain M,Stewart RA,Kerr AJ,Young AA,MRI phase contrast velocity and flow errors in turbulent stenotic jetsJ Magn Reson ImagingYear: 20082821021810.1002/jmri.2139518581344|
|Chernobelsky A,Shubayev O,Comeau CR,Wolff SD,Baseline correction of phase contrast images improves quantification of blood flow in the great vesselsJ Cardiovasc Magn ResonYear: 2007968168510.1080/1097664060118758817578724|
|Miller TA,Landes AB,Moran AM,Improved accuracy in flow mapping of congenital heart disease using stationary phantom techniqueJ Cardiovasc Magn ResonYear: 2009115210.1186/1532-429X-11-5220003318|
|Gatehouse PD,Rolf MP,Graves MJ,Hofman MB,Totman J,Werner B,Quest RA,Liu Y,von Spiczak J,Dieringer M,Firmin DN,van Rossum A,Lombardi M,Schwitter J,Schulz-Menger J,Kilner PJ,Flow measurement by cardiovascular magnetic resonance: a multi-centre multi-vendor study of background phase offset errors that can compromise the accuracy of derived regurgitant or shunt flow measurementsJ Cardiovasc Magn ResonYear: 201012510.1186/1532-429X-12-520074359|
|Firmin DN,Nayler GL,Kilner PJ,Longmore DB,The application of phase shifts in NMR for flow measurementMagn Reson MedYear: 19901423024110.1002/mrm.19101402092345505|
|Canstein C,Cachot P,Faust A,Stalder AF,Bock J,Frydrychowicz A,Kuffer J,Hennig J,Markl M,3D MR flow analysis in realistic rapid-prototyping model systems of the thoracic aorta: comparison with in vivo data and computational fluid dynamics in identical vessel geometriesMagn Reson MedYear: 20085953554610.1002/mrm.2133118306406|
|Hope TA,Markl M,Wigstrom L,Alley MT,Miller DC,Herfkens RJ,Comparison of flow patterns in ascending aortic aneurysms and volunteers using four-dimensional magnetic resonance velocity mappingJ Magn Reson ImagingYear: 2007261471147910.1002/jmri.2108217968892|
|Kramer CM,Barkhausen J,Flamm SD,Kim RJ,Nagel E,Standardized cardiovascular magnetic resonance imaging (CMR) protocols, society for cardiovascular magnetic resonance: board of trustees task force on standardized protocolsJ Cardiovasc Magn ResonYear: 2008103510.1186/1532-429X-10-3518605997|
|Reant P,Lederlin M,Lafitte S,Serri K,Montaudon M,Corneloup O,Roudaut R,Laurent F,Absolute assessment of aortic valve stenosis by planimetry using cardiovascular magnetic resonance imaging: comparison with transesophageal echocardiography, transthoracic echocardiography, and cardiac catheterisationEur J RadiolYear: 20065927628310.1016/j.ejrad.2006.02.01116873006|
|John AS,Dill T,Brandt RR,Rau M,Ricken W,Bachmann G,Hamm CW,Magnetic resonance to assess the aortic valve area in aortic stenosis: how does it compare to current diagnostic standards?J Am Coll CardiolYear: 20034251952610.1016/S0735-1097(03)00707-112906983|
|Tanaka K,Makaryus AN,Wolff SD,Correlation of aortic valve area obtained by the velocity-encoded phase contrast continuity method to direct planimetry using cardiovascular magnetic resonanceJ Cardiovasc Magn ResonYear: 2007979980510.1080/1097664070154547917891618|
|Kilner PJ,Manzara CC,Mohiaddin RH,Pennell DJ,Sutton MG,Firmin DN,Underwood SR,Longmore DB,Magnetic resonance jet velocity mapping in mitral and aortic valve stenosisCirculationYear: 199387123912488462150|
|Sondergaard L,Hildebrandt P,Lindvig K,Thomsen C,Stahlberg F,Kassis E,Henriksen O,Valve area and cardiac output in aortic stenosis: quantification by magnetic resonance velocity mappingAm Heart JYear: 19931261156116410.1016/0002-8703(93)90669-Z8237760|
|Garcia J,Kadem L,Larose E,Clavel MA,Pibarot P,Comparison between cardiovascular magnetic resonance and transthoracic doppler echocardiography for the estimation of effective orifice area in aortic stenosisJ Cardiovasc Magn ResonYear: 2011132510.1186/1532-429X-13-2521527021|
|Debl K,Djavidani B,Buchner S,Lipke C,Nitz W,Feuerbach S,Riegger G,Luchner A,Delayed hyperenhancement in magnetic resonance imaging of left ventricular hypertrophy caused by aortic stenosis and hypertrophic cardiomyopathy: visualisation of focal fibrosisHeartYear: 2006921447145110.1136/hrt.2005.07939216606864|
|Hein S,Arnon E,Kostin S,Schonburg M,Elsasser A,Polyakova V,Bauer EP,Klovekorn WP,Schaper J,Progression from compensated hypertrophy to failure in the pressure-overloaded human heart: structural deterioration and compensatory mechanismsCirculationYear: 200310798499110.1161/01.CIR.0000051865.66123.B712600911|
|Dweck MR,Joshi S,Murigu T,Gulati A,Alpendurado F,Mohiaddin R,Pepper JR,Pennell DJ,Newby D,Prasad S,Mid-wall fibrosis is an independent predictor of mortality in patients with aortic stenosis (abstr)HeartYear: 201197A94|
|Dulce MC,Mostbeck GH,O'Sullivan M,Cheitlin M,Caputo GR,Higgins CB,Severity of aortic regurgitation: interstudy reproducibility of measurements with velocity-encoded cine MR imagingRadiologyYear: 19921852352401523315|
|Honda N,Machida K,Hashimoto M,Mamiya T,Takahashi T,Kamano T,Kashimada A,Inoue Y,Tanaka S,Yoshimoto N,Aortic regurgitation: quantitation with MR imaging velocity mappingRadiologyYear: 19931861891948416562|
|Kozerke S,Scheidegger MB,Pedersen EM,Boesiger P,Heart motion adapted cine phase-contrast flow measurements through the aortic valveMagn Reson MedYear: 19994297097810.1002/(SICI)1522-2594(199911)42:5<970::AID-MRM18>3.0.CO;2-I10542357|
|Chatzimavroudis GP,Oshinski JN,Franch RH,Walker PG,Yoganathan AP,Pettigrew RI,Evaluation of the precision of magnetic resonance phase velocity mapping for blood flow measurementsJ Cardiovasc Magn ResonYear: 20013111910.1081/JCMR-10000014211545135|
|Myerson SG,D'Arcy J,Mohiaddin R,Greenwood JP,Karamitsos TD,Francis JM,Banning AP,Christiansen JP,Neubauer S,Aortic regurgitation quantification with cardiovascular magnetic resonance predicts clinical outcomeHeartYear: 201197A9394|
|Bonow RO,Aortic regurgitation: time to reassess timing of valve replacement?JACC Cardiovasc ImagingYear: 2011423123310.1016/j.jcmg.2011.01.00621414569|
|Underwood SR,Klipstein RH,Firmin DN,Fox KM,Poole-Wilson PA,Rees RS,Longmore DB,Magnetic resonance assessment of aortic and mitral regurgitationBr Heart JYear: 19865645546210.1136/hrt.56.5.4553790381|
|Stork A,Franzen O,Ruschewski H,Detter C,Mullerleile K,Bansmann PM,Adam G,Lund GK,Assessment of functional anatomy of the mitral valve in patients with mitral regurgitation with cine magnetic resonance imaging: comparison with transesophageal echocardiography and surgical resultsEur RadiolYear: 2007173189319810.1007/s00330-007-0671-517549489|
|Chan KM,Wage R,Symmonds K,Rahman-Haley S,Mohiaddin RH,Firmin DN,Pepper JR,Pennell DJ,Kilner PJ,Towards comprehensive assessment of mitral regurgitation using cardiovascular magnetic resonanceJ Cardiovasc Magn ResonYear: 2008106110.1186/1532-429X-10-6119102740|
|Buchner S,Debl K,Poschenrieder F,Feuerbach S,Riegger G,Luchner A,Djavidani B,Cardiovascular Magnetic Resonance for Direct Assessment of Anatomic Regurgitant Orifice in Mitral RegurgitationCirc Cardiovasc ImagingYear: 2008114815510.1161/CIRCIMAGING.107.75310319808532|
|Fujita N,Chazouilleres AF,Hartiala JJ,O'Sullivan M,Heidenreich P,Kaplan JD,Sakuma H,Foster E,Caputo GR,Higgins CB,Quantification of mitral regurgitation by velocity-encoded cine nuclear magnetic resonance imagingJ Am Coll CardiolYear: 19942395195810.1016/0735-1097(94)90642-48106701|
|Gelfand EV,Hughes S,Hauser TH,Yeon SB,Goepfert L,Kissinger KV,Rofsky NM,Manning WJ,Severity of mitral and aortic regurgitation as assessed by cardiovascular magnetic resonance: optimizing correlation with Doppler echocardiographyJ Cardiovasc Magn ResonYear: 2006850350710.1080/1097664060060485616755839|
|Kon MW,Myerson SG,Moat NE,Pennell DJ,Quantification of regurgitant fraction in mitral regurgitation by cardiovascular magnetic resonance: comparison of techniquesJ Heart Valve DisYear: 20041360060715311866|
|D'Arcy J,Christiansen JP,Mohiaddin R,Karamitsos TD,Francis JM,Neubauer S,Myerson SG,Prediction of clinical outcome in asymptomatic mitral regurgitation using CMREuropean Society of Cardiology Congress; 27-31 Aug 2011; ParisYear: 201122272703|
|Enriquez-Sarano M,Avierinos JF,Messika-Zeitoun D,Detaint D,Capps M,Nkomo V,Scott C,Schaff HV,Tajik AJ,Quantitative determinants of the outcome of asymptomatic mitral regurgitationN Engl J MedYear: 200535287588310.1056/NEJMoa04145115745978|
|Myerson SG,Francis JM,Neubauer S,Direct and indirect quantification of mitral regurgitation with cardiovascular magnetic resonance, and the effect of heart rate variabilityMAGMAYear: 20102324324910.1007/s10334-010-0222-y20632070|
|Djavidani B,Debl K,Lenhart M,Seitz J,Paetzel C,Schmid FX,Nitz WR,Feuerbach S,Riegger G,Luchner A,Planimetry of mitral valve stenosis by magnetic resonance imagingJ Am Coll CardiolYear: 2005452048205310.1016/j.jacc.2005.03.03615963408|
|Lin SJ,Brown PA,Watkins MP,Williams TA,Lehr KA,Liu W,Lanza GM,Wickline SA,Caruthers SD,Quantification of stenotic mitral valve area with magnetic resonance imaging and comparison with Doppler ultrasoundJ Am Coll CardiolYear: 20044413313710.1016/j.jacc.2004.03.03815234421|
|Klein AL,Burstow DJ,Tajik AJ,Zachariah PK,Taliercio CP,Taylor CL,Bailey KR,Seward JB,Age-related prevalence of valvular regurgitation in normal subjects: a comprehensive color flow examination of 118 volunteersJ Am Soc EchocardiogrYear: 1990354632310593|
|Karamlou T,McCrindle BW,Williams WG,Surgery insight: late complications following repair of tetralogy of Fallot and related surgical strategies for managementNat Clin Pract Cardiovasc MedYear: 2006361162210.1038/ncpcardio068217063166|
|Rebergen SA,Chin JG,Ottenkamp J,van der Wall EE,de Roos A,Pulmonary regurgitation in the late postoperative follow-up of tetralogy of Fallot. Volumetric quantitation by nuclear magnetic resonance velocity mappingCirculationYear: 199388225722668222120|
|Geva T,Indications and timing of pulmonary valve replacement after tetralogy of Fallot repairSemin Thorac Cardiovasc Surg Pediatr Card Surg AnnuYear: 20061122|
|Vliegen HW,van Straten A,de Roos A,Roest AA,Schoof PH,Zwinderman AH,Ottenkamp J,van der Wall EE,Hazekamp MG,Magnetic resonance imaging to assess the hemodynamic effects of pulmonary valve replacement in adults late after repair of tetralogy of fallotCirculationYear: 20021061703170710.1161/01.CIR.0000030995.59403.F812270866|
|Li W,Davlouros PA,Kilner PJ,Pennell DJ,Gibson D,Henein MY,Gatzoulis MA,Doppler-echocardiographic assessment of pulmonary regurgitation in adults with repaired tetralogy of Fallot: comparison with cardiovascular magnetic resonance imagingAm Heart JYear: 200414716517210.1016/S0002-8703(03)00527-114691436|
|Ammash NM,Dearani JA,Burkhart HM,Connolly HM,Pulmonary regurgitation after tetralogy of Fallot repair: clinical features, sequelae, and timing of pulmonary valve replacementCongenit Heart DisYear: 2007238640310.1111/j.1747-0803.2007.00131.x18377431|
|Oosterhof T,van Straten A,Vliegen HW,Meijboom FJ,van Dijk AP,Spijkerboer AM,Bouma BJ,Zwinderman AH,Hazekamp MG,de Roos A,Mulder BJ,Preoperative thresholds for pulmonary valve replacement in patients with corrected tetralogy of Fallot using cardiovascular magnetic resonanceCirculationYear: 200711654555110.1161/CIRCULATIONAHA.106.65966417620511|
|Frigiola A,Redington AN,Cullen S,Vogel M,Pulmonary regurgitation is an important determinant of right ventricular contractile dysfunction in patients with surgically repaired tetralogy of FallotCirculationYear: 2004110II15315715364855|
|Lurz P,Coats L,Khambadkone S,Nordmeyer J,Boudjemline Y,Schievano S,Muthurangu V,Lee TY,Parenzan G,Derrick G,Cullen S,Walker F,Tsang V,Deanfield J,Taylor AM,Bonhoeffer P,Percutaneous pulmonary valve implantation: impact of evolving technology and learning curve on clinical outcomeCirculationYear: 20081171964197210.1161/CIRCULATIONAHA.107.73577918391109|
|Schievano S,Coats L,Migliavacca F,Norman W,Frigiola A,Deanfield J,Bonhoeffer P,Taylor AM,Variations in right ventricular outflow tract morphology following repair of congenital heart disease: implications for percutaneous pulmonary valve implantationJ Cardiovasc Magn ResonYear: 2007968769510.1080/1097664060118759617578725|
|Kuehne T,Saeed M,Reddy G,Akbari H,Gleason K,Turner D,Teitel D,Moore P,Higgins CB,Sequential magnetic resonance monitoring of pulmonary flow with endovascular stents placed across the pulmonary valve in growing SwineCirculationYear: 20011042363236810.1161/hc4401.09847211696479|
|Mahle WT,Parks WJ,Fyfe DA,Sallee D,Tricuspid regurgitation in patients with repaired Tetralogy of Fallot and its relation to right ventricular dilatationAm J CardiolYear: 20039264364510.1016/S0002-9149(03)00746-X12943899|
|Rees S,Somerville J,Warnes C,Underwood R,Firmin D,Klipstein R,Longmore D,Comparison of magnetic resonance imaging with echocardiography and radionuclide angiography in assessing cardiac function and anatomy following Mustard's operation for transposition of the great arteriesAm J CardiolYear: 1988611316132210.1016/0002-9149(88)91176-93376893|
|Choi YH,Park JH,Choe YH,Yoo SJ,MR imaging of Ebstein's anomaly of the tricuspid valveAJR Am J RoentgenolYear: 19941635395438079839|
|Eustace S,Kruskal JB,Hartnell GG,Ebstein's anomaly presenting in adulthood: the role of cine magnetic resonance imaging in diagnosisClin RadiolYear: 19944969069210.1016/S0009-9260(05)82661-37955830|
|Shellock FG,MR imaging of metallic implants and materials: a compilation of the literatureAJR Am J RoentgenolYear: 19881518118143048071|
|Shellock F,Reference Manual for Magnetic Resonance Safety, Implants and DevicesYear: 20112011Los Angeles: Biomedical Research Publishing Group|
|Botnar R,Nagel E,Scheidegger MB,Pedersen EM,Hess O,Boesiger P,Assessment of prosthetic aortic valve performance by magnetic resonance velocity imagingMagmaYear: 200010182610.1007/BF0261310810697222|
|Hasenkam JM,Ringgaard S,Houlind K,Botnar RM,Stodkilde-Jorgensen H,Boesiger P,Pedersen EM,Prosthetic heart valve evaluation by magnetic resonance imagingEur J Cardiothorac SurgYear: 19991630030510.1016/S1010-7940(99)00215-810554848|
|von Knobelsdorff-Brenkenhoff F,Rudolph A,Wassmuth R,Bohl S,Buschmann EE,Abdel-Aty H,Dietz R,Schulz-Menger J,Feasibility of cardiovascular magnetic resonance to assess the orifice area of aortic bioprosthesesCirc Cardiovasc ImagingYear: 20092397404 392 p following 404. 10.1161/CIRCIMAGING.108.84096719808628|
|Reiter G,Reiter U,Kovacs G,Kainz B,Schmidt K,Maier R,Olschewski H,Rienmueller R,Magnetic Resonance-Derived 3-Dimensional Blood Flow Patterns in the Main Pulmonary Artery as a Marker of Pulmonary Hypertension and a Measure of Elevated Mean Pulmonary Arterial PressureCirc Cardiovasc ImagingYear: 20081233010.1161/CIRCIMAGING.108.78024719808511|
Keywords: Cardiovascular Magnetic Resonance, Valve disease, Flow quantification.
Previous Document: Effects of Phosphonoformic Acid and Renagel on Renal Type IIa Sodium-Dependent Phosphate Cotransport...
Next Document: Influence of ER? selective agonism during the neonatal period on the sexual differentiation of the r...