Document Detail


A Fluid Dynamics Study in a 50 cc Pulsatile Ventricular Assist Device: Influence of Heart Rate Variability.
MedLine Citation:
PMID:  22070327     Owner:  NLM     Status:  In-Data-Review    
Abstract/OtherAbstract:
Although left ventricular assist devices (LVADs) have had success in supporting severe heart failure patients, thrombus formation within these devices still limits their long term use. Research has shown that thrombosis in the Penn State pulsatile LVAD, on a polyurethane blood sac, is largely a function of the underlying fluid mechanics and may be correlated to wall shear rates below 500 s(-1). Given the large range of heart rate and systolic durations employed, in vivo it is useful to study the fluid mechanics of pulsatile LVADs under these conditions. Particle image velocimetry (PIV) was used to capture planar flow in the pump body of a Penn State 50 cubic centimeters (cc) LVAD for heart rates of 75-150 bpm and respective systolic durations of 38-50%. Shear rates were calculated along the lower device wall with attention given to the uncertainty of the shear rate measurement as a function of pixel magnification. Spatial and temporal shear rate changes associated with data collection frequency were also investigated. The accuracy of the shear rate calculation improved by approximately 40% as the resolution increased from 35 to 12 μm/pixel. In addition, data collection in 10 ms, rather than 50 ms, intervals was found to be preferable. Increasing heart rate and systolic duration showed little change in wall shear rate patterns, with wall shear rate magnitude scaling by approximately the kinematic viscosity divided by the square of the average inlet velocity, which is essentially half the friction coefficient. Changes in in vivo operating conditions strongly influence wall shear rates within our device, and likely play a significant role in thrombus deposition. Refinement of PIV techniques at higher magnifications can be useful in moving towards better prediction of thrombosis in LVADs.
Authors:
Jason C Nanna; Michael A Navitsky; Stephen R Topper; Steven Deutsch; Keefe B Manning
Related Documents :
2146867 - Cardiac fluoroscopy for the diagnosis of coronary artery disease: a meta analytic review.
11919127 - Impact of diabetes on coronary stenosis and coronary artery calcification detected by e...
14617567 - Single coronary artery: a familial clustering.
15157007 - Frequency in the anomalous origin of the left main coronary artery with angiography in ...
179067 - Coronary artery surgery. operative technique and patient education.
16022957 - Reduced systemic arterial compliance impacts significantly on left ventricular afterloa...
Publication Detail:
Type:  Journal Article    
Journal Detail:
Title:  Journal of biomechanical engineering     Volume:  133     ISSN:  1528-8951     ISO Abbreviation:  J Biomech Eng     Publication Date:  2011 Oct 
Date Detail:
Created Date:  2011-11-10     Completed Date:  -     Revised Date:  -    
Medline Journal Info:
Nlm Unique ID:  7909584     Medline TA:  J Biomech Eng     Country:  United States    
Other Details:
Languages:  eng     Pagination:  101002     Citation Subset:  IM    
Affiliation:
Department of Bioengineering, The Pennsylvania State University, 205 Hallowell Building, University Park, PA 16802 e-mail: kbm10@psu.edu.
Export Citation:
APA/MLA Format     Download EndNote     Download BibTex
MeSH Terms
Descriptor/Qualifier:

From MEDLINE®/PubMed®, a database of the U.S. National Library of Medicine


Previous Document:  Design and manufacture of combinatorial calcium phosphate bone scaffolds.
Next Document:  Cardiac Assist With a Twist: Apical Torsion as a Means to Improve Failing Heart Function.