Document Detail

Effect of framework material and vertical misfit on stress distribution in implant-supported partial prosthesis under load application: 3-D finite element analysis.
MedLine Citation:
PMID:  23320569     Owner:  NLM     Status:  Publisher    
Abstract Objective. This study evaluated the influence of framework material and vertical misfit on stress created in an implant-supported partial prosthesis under load application. Materials and methods. The posterior part of a severely reabsorbed jaw with a fixed partial prosthesis above two osseointegrated titanium implants at the place of the second premolar and second molar was modeled using SolidWorks 2010 software. Finite element models were obtained by importing the solid model into an ANSYS Workbench 11 simulation. The models were divided into 15 groups according to their prosthetic framework material (type IV gold alloy, silver-palladium alloy, commercially pure titanium, cobalt-chromium alloy or zirconia) and vertical misfit level (10 µm, 50 µm and 100 µm). After settlement of the prosthesis with the closure of the misfit, simultaneous loads of 110 N vertical and 15 N horizontal were applied on the occlusal and lingual faces of each tooth, respectively. The data was evaluated using Maximum Principal Stress (framework, porcelain veneer and bone tissue) and a von Mises Stress (retention screw) provided by the software. Results. As a result, stiffer frameworks presented higher stress concentrations; however, these frameworks led to lower stresses in the porcelain veneer, the retention screw (faced to 10 µm and 50 µm of the misfit) and the peri-implant bone tissues. Conclusion. The increase in the vertical misfit resulted in stress values increasing in all of the prosthetic structures and peri-implant bone tissues. The framework material and vertical misfit level presented a relevant influence on the stresses for all of the structures evaluated.
Ataís Bacchi; Rafael Leonardo Xediek Consani; Marcelo Ferraz Mesquita; Mateus Bertolini Fernandes Dos Santos
Related Documents :
24372309 - In vitro cytotoxicity and in vivo effects of a decellularized xenogeneic collagen scaff...
10522199 - Predictability of a three-dimensional planning system for oral implant surgery.
23355379 - Measurement of gingival thickness using digital vernier caliper and ultrasonographic me...
16164469 - Accuracy of navigation-guided socket drilling before implant installation compared to t...
15747679 - Intraoperative computerized navigation for flapless implant surgery and immediate loadi...
23768899 - The application of poly(3-hydroxybutyrate-co-3-hydroxyhexanoate) scaffolds for tendon r...
3752229 - An elemental analysis of archaeological bone from sicily as a test of predictability of...
17600319 - Effect of hydroxyapatite coating and polymethylmethacrylate on stainless steel implant-...
16793479 - Sem observations and differential scanning calorimetric studies of new and sterilized n...
Publication Detail:
Type:  JOURNAL ARTICLE     Date:  2013-1-16
Journal Detail:
Title:  Acta odontologica Scandinavica     Volume:  -     ISSN:  1502-3850     ISO Abbreviation:  Acta Odontol. Scand.     Publication Date:  2013 Jan 
Date Detail:
Created Date:  2013-1-16     Completed Date:  -     Revised Date:  -    
Medline Journal Info:
Nlm Unique ID:  0370344     Medline TA:  Acta Odontol Scand     Country:  -    
Other Details:
Languages:  ENG     Pagination:  -     Citation Subset:  -    
Department of Prosthodontics and Periodontics, Piracicaba Dental School, Campinas State University , Piracicaba, SP , Brazil.
Export Citation:
APA/MLA Format     Download EndNote     Download BibTex
MeSH Terms

From MEDLINE®/PubMed®, a database of the U.S. National Library of Medicine

Previous Document:  In vitro and In vivo Anticancer Activity of Copper Bis(thiosemicarbazone) Complexes.
Next Document:  Biallelic PDX1 (insulin promoter factor 1) mutations causing neonatal diabetes without exocrine panc...