Document Detail

Controllable growth of ZnO nanorod arrays with different densities and their photoelectric properties.
Jump to Full Text
MedLine Citation:
PMID:  22559262     Owner:  NLM     Status:  PubMed-not-MEDLINE    
Abstract/OtherAbstract:
Since the photoelectric response and charge carriers transport can be influenced greatly by the density and spacing of the ZnO nanorod arrays, controlling of these geometric parameters precisely is highly desirable but rather challenging in practice. Here, we fabricated patterned ZnO nanorod arrays with different densities and spacing distances on silicon (Si) substrate by electron beam lithography (EBL) method combined with the subsequent hydrothermal reaction process. By using the EBL method, patterned ZnO seed layers with different areas and spacing distances were obtained firstly. ZnO nanorod arrays with different densities and various morphologies were obtained by the subsequent hydrothermal growth process. The combination of EBL and hydrothermal growth process was very attractive and could make us control the geometric parameters of ZnO nanorod arrays expediently. Finally, the vertical transport properties of the patterned ZnO nanorod arrays were investigated through the microprobe station equipment, and the I-V measurement results indicated that the back-to-back Schottky contacts with different barrier heights were formed in dark conditions. Under UV light illumination, the patterned ZnO nanorod arrays showed a high UV light sensitivity, and the response ratio was about 104. The controllable fabrication of patterned ZnO nanorod arrays and understanding their photoelectric transport properties were helpful to improve the performance of nanodevices based on them.
Authors:
Shujie Wang; Chongshun Song; Ke Cheng; Shuxi Dai; Yayan Zhang; Zuliang Du
Publication Detail:
Type:  Journal Article     Date:  2012-05-06
Journal Detail:
Title:  Nanoscale research letters     Volume:  7     ISSN:  1556-276X     ISO Abbreviation:  Nanoscale Res Lett     Publication Date:  2012  
Date Detail:
Created Date:  2012-11-05     Completed Date:  2012-11-06     Revised Date:  2013-02-19    
Medline Journal Info:
Nlm Unique ID:  101279750     Medline TA:  Nanoscale Res Lett     Country:  United States    
Other Details:
Languages:  eng     Pagination:  246     Citation Subset:  -    
Affiliation:
Key Laboratory for Special Functional Materials, Henan University, Kaifeng 475004, People's Republic of China. zld@henu.edu.cn.
Export Citation:
APA/MLA Format     Download EndNote     Download BibTex
MeSH Terms
Descriptor/Qualifier:
Comments/Corrections

From MEDLINE®/PubMed®, a database of the U.S. National Library of Medicine

Full Text
Journal Information
Journal ID (nlm-ta): Nanoscale Res Lett
Journal ID (iso-abbrev): Nanoscale Res Lett
ISSN: 1931-7573
ISSN: 1556-276X
Publisher: Springer
Article Information
Download PDF
Copyright ©2012 Wang et al.; licensee Springer.
open-access:
Received Day: 1 Month: 2 Year: 2012
Accepted Day: 26 Month: 3 Year: 2012
collection publication date: Year: 2012
Electronic publication date: Day: 6 Month: 5 Year: 2012
Volume: 7 Issue: 1
First Page: 246 Last Page: 246
PubMed Id: 22559262
ID: 3488006
Publisher Id: 1556-276X-7-246
DOI: 10.1186/1556-276X-7-246

Controllable growth of ZnO nanorod arrays with different densities and their photoelectric properties
Shujie Wang1 Email: wsj@henu.edu.cn
Chongshun Song1 Email: song@henu.edu.cn
Ke Cheng1 Email: ck@henu.edu.cn
Shuxi Dai1 Email: Shuxidai@henu.edu.cn
Yayan Zhang1 Email: zyy@henu.edu.cn
Zuliang Du1 Email: zld@henu.edu.cn
1Key Laboratory for Special Functional Materials, Henan University, Kaifeng 475004, People’s Republic of China

Background

There is a growing interest in designing new architectures for enhancing the performance of photoelectric devices [1]. Due to the uniquely combined optical and electrical characteristics, ordered nanorod arrays have received considerable attentions for this goal [2]. Photoelectric devices based on ZnO, CdS, ZnS, InP, SnO2, and Si nanowires or nanorod arrays offer the advantages of enhanced light absorption, improved carrier collection efficiency, and longer lifetime for minority carriers compared to conventional planar photoelectric devices, which can find many applications from field emission devices, sensors, solar cells, nanogenerators to UV photodetectors with the significantly improved performances [3-9]. Among them, ZnO nanorod array is one of the most promising materials for photoelectric devices due to its large exciton binding energy (60 meV), versatile synthesis, high mechanical and thermal stabilities, and nontoxic n-type nature [10].

Recently, various synthetic methods have been developed for the growth and fabrication of vertically aligned ZnO nanorod arrays, which can be classified into two categories: vapor-phase and hydrothermal synthesis. The hydrothermal synthesis method is more favorable for the practical applications due to its low growth temperature, low cost, and good potential for scale-up. More importantly, this method avoids the usage of gold catalyst, which is commonly used in vapor-phase methods and may introduce the residual catalyst atoms into the ZnO rod arrays [11-13]. Based on the hydrothermal method, three dimensional (3D) ZnO hybrid architectures and “nanoforest” hierarchical ZnO arrays have been synthesized [14,15]. Theoretical and experimental works also have been carried out on the ZnO nanorod arrays based photoelectric devices and shown that the photoelectric response and charge carriers transport can be influenced greatly by the density and spacing of the ZnO nanorod arrays. Wang et al. report the field emission properties of ZnO arrays are correlative with the rod density [16]. Subsequently, Spencer et al. prove theoretically that varying the spacing will affect the sensing property of ZnO nanorods using the density functional theory [17]. Therefore, ZnO nanostructure arrays fabricated following a designed pattern, with a high degree of control in density and spacing is highly desirable. The development of nanofabrication techniques and equipments such as electron beam lithography (EBL), nanoimprint lithography, laser interference lithography, and nanosphere lithography provide us the potential opportunity to fulfill this goal [18].

However, precise control of these geometric parameters is rather challenging in practice. The e-beam lithography is the most reliable technique which can define the exact positions of the nanostructures with high precision. Therefore, the spacing distance between the patterned ZnO seed areas can be easily controlled in nanometer scales by using the EBL method. On the other hand, the hydrothermal growth technique of ZnO is versatile, large scale, and not confined to the inorganic substrate due to its low growth temperature as mentioned above. Therefore, combining these two methods together to fabricate patterned ZnO nanorod arrays with controllable geometric parameters is possible and attractive.

In this paper, patterned ZnO nanorod arrays with well-defined positions and spacing distance are fabricated onto Si substrate by a combination of EBL and hydrothermal growth process. The influences of spacing distance and growth time on the morphology of the nanorod arrays are also investigated. Finally, the transport properties of our ZnO nanorod arrays with suitable spacing distance and density are investigated.


Methods

Schematic diagram of the experimental procedures for the patterned ZnO nanorod arrays are shown in Figure  1. Si wafer is cleaned sequentially in ethanol and acetone for 20 min, respectively. A layer of polymethyl methacrylate (PMMA) is cast on the Si substrate at 2, 000 rpm (rounds per minute) for 40 s by spin coating methods as shown in Figure  1a. Then, the patterns are designed on PMMA by using the EBL methods as shown in Figure  1b. Reactive ion etching treatment (25 mTorr, 50 sccm, 50 W, 5 s) is used to remove the residual PMMA on the exposure Si substrate. ZnO seed layer (thickness about 40 nm) is deposited using magnetron sputtering method (Figure  1c), and after strip, the PMMA in acetone, patterned ZnO seed areas, are obtained on the Si substrate. (Figure  1d).

The hydrothermal method is used for the growth of ZnO nanorods on the patterned areas as shown in Figure  1e. For details, the Si substrate is immersed vertically in the nutrient solution of 0.035 M zinc nitrate [Zn(NO3)2 · 6H2O] and 0.65 M NH3. The reaction temperature is kept at 80°C with different reaction times. The morphologies of the samples are characterized by scanning electron microscopy (SEM) (JEOL, JSM-5600LV, Akishima, Tokyo, Japan), high-resolution transmission electron microscopy (high-resolution transmission electron microscopy (HRTEM) (JEOL JEM 2010). The current–voltage characteristics measurements are carried out on the probe station (Lake Shore) equipped with a Keithley 4,200 semiconductor characterization system (Cleveland, OH, USA). The light used in our experiment is an UV light source (λ = 350 nm) with an average power of 0.8 mW.


Results and Discussion

Figure  2 are the SEM images of ZnO nanorod arrays patterned by EBL method. Figure  2a,c,e is the ZnO dot patterns after peeling the PMMA layer from the Si substrate (a). The dot area is 200 × 200 nm, and the distance between each dot is 1 μm (c). The dot area is 500 × 500 nm, distance is 2 μm (e). The dot area is 1 × 1 μm, distance is 4 μm. Different dot areas with different spacing distances are obtained through EBL and subsequent magnetron sputtering techniques. Figure  2b,d,f is the nanorod arrays after hydrothermal process on the patterned ZnO seed areas at 80°C for 1-h reaction time. The results indicate that ZnO nanorod arrays are successfully obtained which confined to the ZnO seed areas. The length of the nanorod is about 1 μm with a diameter less than 100 nm. For the 200 × 200 nm ZnO seed areas with 1 μm spacing distance, the bundles of the nanorods are connected with each other without the edge confinement just like flowers on the Si substrate as shown in Figure  2b. While for the larger ZnO seed areas (500 × 500 nm) and longer spacing distance (2 μm), the nanorod patterns are separated with each other on the Si substrate, and the larger ZnO seed areas include more nanorods when compare with that of 200 × 200 nm areas. For the 1 × 1 μm ZnO seed areas, there are no nanorods that appear in the middle of the dot areas due to the short reaction time which is in accordance with the literature reports [19].

Since the growth time in the hydrothermal process is the main factor which can be used to control the morphology and density of ZnO nanorod patterns; therefore, the density variations of ZnO nanorod arrays are investigated for the different reaction times during the hydrothermal process. Figure  3a,b,c is the SEM images of ZnO nanorods with a 1.5-h reaction time on the same patterned areas used for the 1-h reaction time as shown in Figure  2. The patterns on 200 × 200 nm seed areas cannot be distinguished due to the longer reaction time, which make the nanorods bundles much longer to closeness with each other (Figure  3a). For the 500 × 500 nm seed areas as shown in Figure  3b, the nanorod arrays are vertical aligned on the Si substrate with 2 μm spacing distance. We should note that the ZnO nanorods at the edge of the pattern have a tendency to grow outward, whereas the nanorods at the central part of the patterns grow vertically to the substrate. Such effect appears more serious for the seed areas with a larger area size, which results in the hemispherical growth of ZnO nanorod array from the patterned areas just as shown in Figure  3c. With the growth time increased to 2 h, the patterns for 200 × 200 nm and 500 × 500 nm ZnO seed areas both disappeared as shown in Figure  3d,e. For the 1 × 1 μm ZnO seed areas with 4 μm spacing distance higher density of patterned ZnO nanorod arrays are obtained as display in Figure  3f. In addition, the diameters of the ZnO nanorods near the edge of the pattern are larger than that inside the pattern which can be seen in Figure  3f. The dependence of the diameters of the nanorods may be due to the effects of the density of neighboring nanorods which can hinder nanorods growth; and also, the nanorods at the edge have a greater precursor chemical source supply than are present for the high density ZnO nanorods in the central regions.

Figure  4a,b is the transmission electron microscopy (TEM) and HRTEM images of individual ZnO nanorod, respectively. It shows the single nanorod with diameter less than 100 nm, and well-defined lattice fringe separation with 0.26 nm. It is also in agreement with the selected area electron diffraction results (the inset of Figure  4b) which indicates that the nanorod have a high quality single-crystalline structure and growth orientation along the [0001] direction.

The photoelectric transport properties of the patterned ZnO nanorod arrays are then investigated through the microprobe station equipment. Figure  5a is the schematics of the apparatus we used in our experiment. In this system, Au electrodes on the top of the nanorods and the Si substrate are designed through one-step deposition method on the 1.5-h growth time of the patterned ZnO nanorods in the 500 × 500 nm seed areas with 2-μm spacing distance. Figure  5b shows typical current voltage (I-V) characteristics of the fabricated ZnO nanorod structures measured in dark and under UV light illumination conditions. With applied bias (from −2.0 to +2.0) voltages, the curve exhibits asymmetrical nonlinear behavior with lower current value as several nA in dark conditions. Under UV light illumination, the current is increased greatly, and the curve exhibits from asymmetrical to symmetrical nonlinear I-V behavior. At 2 V applied bias voltage, the dark current is about 4.0 × 10−10 A, and the photocurrent is 3.0 × 10−6 A; the current contrast ratio of photocurrent to dark is about 104. The nonlinear behaviors of ZnO nanorod have been reported in many literatures. Usually the nonlinear behavior is caused by the Schottky barriers formed between the semiconductor and the metal electrodes, and the shape of I-V curve depends on the heights of the Schottky barriers between the interface of metal and semiconductors [20-22]. The nonlinear I-V characters as the reverse current of Schottky diodes properties are usually described by the thermionic field emission model which has been developed by Padovani and Stratton [23]. In this model of Schottky diodes, the logarithmic plot of the current I as a function of the bias V give approximately a straight line of slope qkT−1E0[24]. By fitting the I-V curves, we find that lnI is linear with V both for under dark and illumination conditions, just as shown in Figure  5c. Therefore, two back-to-back Schottky contacts are formed in Au-ZnO-Au structure. In this structure, the current is dominated by the reverse current of reverse biased Schottky barrier.

The asymmetrical I-V curves mean that the-two Schottky barriers heights are different in dark condition. In nanometer scales, the surfaces states on the semiconductor surface will play a crucial role in determining the electron transport properties of nanostructures. The previous studies by our group and others have demonstrated that the surface states on the ZnO nanostructure surface can dominate the photoelectric properties of the ZnO nanorod arrays, and different surface states which caused by O2 adsorption or vacancies on the surfaces of semiconductor nanowires will cause the asymmetrical behavior of I-V curves [25-30]. In this experiment, one end of the Au electrode is deposited on the top of the ZnO nanorods, and the other end is surrounding the patterned ZnO nanorods on the Si substrate. In the middle of the ZnO nanorod patterns, there might have no Au deposited because of the high density of the rod arrays. Therefore, different contact properties are formed between the two ends of the Au electrode, accordingly different surface states will formed between ZnO nanorod and Au electrodes. Different heights of the Schottky barriers at the interface of metal and semiconductor which dominate by the surface states will make the asymmetrical I-V curves in dark condition. Under UV light irradiation, the photogenerated electrons and holes are quickly separated through the strong local electric fields formed at the reverse bias Schottky barrier, resulting in the current increased greatly. Since the barrier height and build-in electric field of Schottky diodes are different, the separation efficiency of photogenerated electron–hole pairs in the depletion layer will be different [25]. The higher build-in electric field can separate more photogenerated holes to the surface of the ZnO nanorod, and the Schottky barriers height will be degraded larger also. As a result, the I-V curve changes from asymmetrical to symmetrical nonlinear I-V behavior under UV light illumination.


Conclusions

In summary, we have demonstrated an effective approach for controllable fabrication of ZnO nanorod arrays with different geometric parameters through the combination of EBL and hydrothermal growth process. EBL is employed to fabricate the patterned ZnO seed layers with different areas and spacing distances with high precise, while a hydrothermal growth method is used to control the density and morphologies of ZnO nanorod arrays. This combined nanofabrication approach provide a possibility to integrate the patterned ZnO nanorod arrays into real devices. The vertical transport properties of the patterned ZnO nanorod arrays are investigated, and the I-V curve measurement indicates that the back-to-back Schottky contacts with different barrier heights are formed between the Au electrodes and ZnO nanorods in dark conditions. Under UV light illumination, the patterned ZnO nanorod arrays show a high UV light sensitivity, and the response ratio is about 104. The controllable fabrication of patterned ZnO nanorod arrays and understanding their photo-electric transport properties are helpful to fabricate novel nanodevices based on them.


Competing interests

The authors declare that they have no competing interests.


Authors’ contributions

WSJ and SCC are the primary authors and carried out the experiments, characterization, and acquisition of data. CK participated in analysis and interpretation of data. DSX and ZZY participated in language modification. ZLD is the principal investigator who helped in analysis and interpretation of data, drafting of the manuscript, and revisions. All authors read and approved the final manuscript.


Acknowledgements

This work was supported by the National Natural Science Foundation of China (Grant Nos. 20903034 and 10874040), and the Cultivation Fund of the Key Scientific and Technical Innovation Project, Ministry of Education of China (No. 708062), and supported by Program for Changjiang Scholars and Innovative Research Team in University, No. PCS IRT1126.


References
Wang ZL,Nanobelts, nanowires, and nanodiskettes of semiconducting oxides—from materials to nanodevicesAdv MaterYear: 20031543243610.1002/adma.200390100
Fan ZY,Razavi H,Do JW,Moriwaki A,Ergen O,Chueh YL,Leu PW,Ho JC,Takahashi T,Reichertz L,Neale S,Yu K,Wu M,Ager JW,Javey A,Three-dimensional nanopillar-array photovoltaics on low-cost and flexible substratesNat MaterYear: 2009864865310.1038/nmat249319578336
Liu JP,Huang XT,Li YY,Ji XX,Li ZK,He X,Sun FL,Vertically aligned 1D ZnO nanostructures on bulk alloy substrates: Direct solution synthesis, photoluminescence, and field emissionJ Phys Chem CYear: 20071114990499710.1021/jp067782o
Wang JX,Sun XW,Yang Y,Huang H,Lee YC,Tan OK,Vayssieres L,Hydrothermally grown oriented ZnO nanorod arrays for gas sensing applicationsNanotechnologyYear: 200617499510.1088/0957-4484/17/19/037
Gonzalez-Valls I,Lira-Cantu M,Vertically-aligned nanostructures of ZnO for excitonic solar cells: a reviewEnerg Environ SciYear: 200821934
Zhou ZH,Wu J,Li HD,Wang ZM,Field emission from in situ-grown vertically aligned SnO2 nanowire arraysNanoscale Res LettYear: 2012711710.1186/1556-276X-7-11722330800
Zhou ZH,Zhan CH,Wang YY,Su YJ,Yang Z,Zhang YF,Rapid mass production of ZnO nanowires by a modified carbothermal reduction methodMater LettYear: 20116583283510.1016/j.matlet.2010.12.032
Soumen D,Giri PK,Enhanced UV photosensitivity from rapid thermal annealed vertically aligned ZnO nanowiresNanoscale Res LettYear: 2011650410.1186/1556-276X-6-50421859456
Li Q,Cheng K,Weng WJ,Song CL,Du PY,Shen G,Han HR,Room-temperature nonequilibrium growth of controllable ZnO nanorod arraysNanoscale Res LettYear: 2011647710.1186/1556-276X-6-47721794165
Zacharias M,Subannajui K,Menzel A,Yang Y,ZnO nanowire arrays—Pattern generation, growth and applicationsPhys Status Solidi BYear: 20102472305231410.1002/pssb.201046399
Liu Y,Kang ZH,Chen ZH,Shafiq I,Zapien JA,Bello I,Zhang WJ,Lee ST,Synthesis, characterization, and photocatalytic application of different ZnO nanostructures in array configurationsCryst Growth DesYear: 200993222322710.1021/cg801294x
Wei YG,Wu WZ,Guo R,Yuan DJ,Das S,Wang ZL,Wafer-scale high-throughput ordered growth of vertically aligned ZnO nanowire arraysNano LettYear: 2010103414341910.1021/nl101429820681617
Ko SH,Lee D,Kang HW,Nam KH,Yeo JY,Hong SJ,Grigoropoulos CP,Sung HJ,Nanoforest of hydrothermally grown hierarchical ZnO nanowires for a high efficiency dye-sensitized solar cellNano LettYear: 20111166667110.1021/nl103796221207931
Song HS,Zhang WJ,Cheng C,Tang YB,Luo LB,Chen X,Luan CY,Meng XM,Zapien JA,Wang N,Lee CS,Bello I,Lee ST,Controllable fabrication of three-dimensional radial ZnO nanowire/silicon microrod hybrid architecturesCryst Growth DesYear: 201011147153
Xu S,Wei YG,Kirkham M,Liu J,Mai WJ,Davidovic D,Snyder RL,Wang ZL,Patterned growth of vertically aligned ZnO nanowire arrays on inorganic substrates at low temperature without catalystJ Am Chem SocYear: 2008130149581495910.1021/ja806952j18921981
Wang XD,Zhou J,Lao CS,Song JH,Xu NS,Wang ZL,In situ field emission of density‐controlled ZnO nanowire arraysAdv MaterYear: 2007191627163110.1002/adma.200602467
Spencer M,Yarovsky I,Wlodarski W,Kalantar-zadeh K,Interaction of hydrogen with zinc oxide nanorods: why the spacing is importantNanotechnologyYear: 20112213570410.1088/0957-4484/22/13/13570421343648
Fan HJ,Werner P,Zacharias M,Semiconductor nanowires: from self‐organization to patterned growthSmallYear: 2006270071710.1002/smll.20050049517193109
Kang HW,Yeo J,Hwang JO,Hong S,Lee P,Han SY,Lee JH,Rho YS,Kim SO,Ko SH,Sung HJ,Simple ZnO nanowires patterned growth by microcontact printing for high performance field emission deviceJ Phys Chem CYear: 2011115114351144110.1021/jp2019044
Zhou J,Gu YD,Hu YF,Mai WJ,Yeh PH,Bao G,Sood AK,Polla DL,Wang ZL,Gigantic enhancement in response and reset time of ZnO UV nanosensor by utilizing Schottky contact and surface functionalizationAppl Phys LettYear: 20099419110310.1063/1.313335819654881
Das SN,Choi JH,Kar JP,Moon KJ,Lee TI,Myoung JM,Junction properties of Au/ZnO single nanowire Schottky diodeAppl Phys LettYear: 20109609211110.1063/1.3339883
Brillson LJ,Lu Y,ZnO Schottky barriers and Ohmic contactsJ Appl PhysYear: 201110912130110.1063/1.3581173
Padovani FA,Stratton R,Field and thermionic-field emission in Schottky barriersSolid State ElectronYear: 1966969570710.1016/0038-1101(66)90097-9
Zhang ZY,Yao K,Liu Y,Jin CH,Liang XL,Chen Q,Peng LM,Quantitative analysis of current Cvoltage characteristics of semiconducting nanowires: decoupling of contact effectsAdv Funct MaterYear: 2007172478248910.1002/adfm.200600475
Cheng K,Cheng G,Wang SJ,Li LS,Dai SX,Zhang XT,Zou BS,Du ZL,Surface states dominative Au Schottky contact on vertical aligned ZnO nanorod arrays synthesized by low-temperature growthNew J PhysYear: 2007921410.1088/1367-2630/9/7/214
Cheng G,Li ZH,Wang SJ,Gong HZ,Cheng K,Jiang XH,Zhou SM,Du ZL,Cui T,Zou GT,The unsaturated photocurrent controlled by two-dimensional barrier geometry of a single ZnO nanowire Schottky photodiodeAppl Phys LettYear: 20089312310310.1063/1.2989129
Wang SJ,Lu WJ,Cheng G,Cheng K,Jiang XH,Du ZL,Electronic transport property of single-crystalline hexagonal tungsten trioxide nanowiresAppl Phys LettYear: 20099426310610.1063/1.3158953
Allen MW,Durbin SM,Influence of oxygen vacancies on Schottky contacts to ZnOAppl Phys LettYear: 20089212211010.1063/1.2894568
Lao CS,Liu J,Gao PX,Zhang LY,Davidovic D,Tummala R,Wang ZL,ZnO nanobelt/nanowire Schottky diodes formed by dielectrophoresis alignment across Au electrodesNano LettYear: 2006626326610.1021/nl052239p16464047
Harnack O,Pacholski C,Weller H,Yasuda A,Wessels JM,Rectifying behavior of electrically aligned ZnO nanorodsNano LettYear: 200331097110110.1021/nl034240z

Figures

[Figure ID: F1]
Figure 1 

Schematics of the experimental procedures of patterned ZnO nanorod arrays. (a) Spincoating PMMA on Si substrate; (b) Pattern fabrication by EBL method; (c) Magnetron sputtering ZnO seed layer; (d) Strip PMMA in acetone solution; (e) Hydrothermal growth ZnO nanorods on the patterned areas.



[Figure ID: F2]
Figure 2 

The SEM image of ZnO dot area and nanorod arrays. (a) The SEM image of ZnO dot area with 200 × 200 nm; (c) dot area is 500 × 500 nm; and (e) dot area is 1 × 1 μm. (b) The SEM image of ZnO nanorod arrays with 1-h hydrothermal reaction process on 200 × 200 nm seed areas; (d) on 500 × 500 nm seed areas; and (f) on 1 × 1 μm seed areas.



[Figure ID: F3]
Figure 3 

The SEM image of ZnO dot area and nanorod arrays with growth time 1.5 and 2.0 h. (a) The SEM image of ZnO nanorod arrays with growth time of 1.5 h on 200 × 200 nm seed areas; (b) seed areas are 500 × 500 nm; and (c) seed areas are1 × 1 μm; (d) The SEM image of ZnO nanorod arrays with growth time of 2.0 h on 200 × 200 nm seed areas; (e) 500 × 500 nm seed areas; and (f) 1 × 1 μm seed areas.



[Figure ID: F4]
Figure 4 

The TEM and HRTEM images of ZnO nanorod. (a) The TEM image of ZnO nanorod; (b) The HRTEM image of ZnO nanorod, and the inset image of Figure  4b is the diffraction pattern of ZnO nanorod.



[Figure ID: F5]
Figure 5 

Schematics of the apparatus used and the I-V characteristics of the ZnO nanorod arrays. (a) The schematics of the apparatus used in our experiment; (b) I-V characteristics of the ZnO nanorod arrays measured in dark and under UV illumination; and (c) Fitted lnI versus V curve in dark and under UV illumination conditions.



Article Categories:
  • Nano Express

Keywords: ZnO nanorod arrays, EBL, Hydrothermal, Photoelectric.

Previous Document:  AlliumMap-A comparative genomics resource for cultivated Allium vegetables.
Next Document:  Beyond Homeostasis: A Predictive-Dynamic Framework for Understanding Cellular Behavior.