Document Detail

Antimicrobial breakpoint estimation accounting for variability in pharmacokinetics.
Jump to Full Text
MedLine Citation:
PMID:  19558679     Owner:  NLM     Status:  MEDLINE    
Abstract/OtherAbstract:
BACKGROUND: Pharmacokinetic and pharmacodynamic (PK/PD) indices are increasingly being used in the microbiological field to assess the efficacy of a dosing regimen. In contrast to methods using MIC, PK/PD-based methods reflect in vivo conditions and are more predictive of efficacy. Unfortunately, they entail the use of one PK-derived value such as AUC or Cmax and may thus lead to biased efficiency information when the variability is large. The aim of the present work was to evaluate the efficacy of a treatment by adjusting classical breakpoint estimation methods to the situation of variable PK profiles. METHODS AND RESULTS: We propose a logical generalisation of the usual AUC methods by introducing the concept of "efficiency" for a PK profile, which involves the efficacy function as a weight. We formulated these methods for both classes of concentration- and time-dependent antibiotics. Using drug models and in silico approaches, we provide a theoretical basis for characterizing the efficiency of a PK profile under in vivo conditions. We also used the particular case of variable drug intake to assess the effect of the variable PK profiles generated and to analyse the implications for breakpoint estimation. CONCLUSION: Compared to traditional methods, our weighted AUC approach gives a more powerful PK/PD link and reveals, through examples, interesting issues about the uniqueness of therapeutic outcome indices and antibiotic resistance problems.
Authors:
Goue Denis Gohore Bi; Jun Li; Fahima Nekka
Related Documents :
16315169 - Pharmacokinetic applications of capillary electrophoresis: a review on recent progress.
24621009 - Objective evaluation of fatigue by eeg spectral analysis in steady-state visual evoked ...
10807559 - Development of a physiologically based pharmacokinetic model of trichloroethylene and i...
18504759 - Comparison of three physiologically-based pharmacokinetic models for the prediction of ...
9587959 - Novel pharmacokinetic modelling of transdermal nitroglycerin.
1820929 - Application of non parametric methods to pharmacokinetic models of the michaelis-menten...
20635129 - Information-geometric measure of 3-neuron firing patterns characterizes scale-dependenc...
18063009 - Dna damage response, telomere maintenance and ageing in light of the integrative model.
19785779 - Window screening, ceilings and closed eaves as sustainable ways to control malaria in d...
Publication Detail:
Type:  Comparative Study; Journal Article; Research Support, Non-U.S. Gov't     Date:  2009-06-26
Journal Detail:
Title:  Theoretical biology & medical modelling     Volume:  6     ISSN:  1742-4682     ISO Abbreviation:  -     Publication Date:  2009  
Date Detail:
Created Date:  2009-07-14     Completed Date:  2009-10-01     Revised Date:  2009-11-18    
Medline Journal Info:
Nlm Unique ID:  101224383     Medline TA:  Theor Biol Med Model     Country:  England    
Other Details:
Languages:  eng     Pagination:  10     Citation Subset:  IM    
Affiliation:
Faculté de Pharmacie, Université de Montréal, Montréal, Québec, Canada. gd.gohore.bi@umontreal.ca
Export Citation:
APA/MLA Format     Download EndNote     Download BibTex
MeSH Terms
Descriptor/Qualifier:
Animal Feed
Animals
Anti-Bacterial Agents / administration & dosage,  pharmacokinetics*,  pharmacology*
Area Under Curve
Drug Resistance, Bacterial
Humans
Microbial Sensitivity Tests / statistics & numerical data
Models, Biological*
Swine
Chemical
Reg. No./Substance:
0/Anti-Bacterial Agents
Comments/Corrections

From MEDLINE®/PubMed®, a database of the U.S. National Library of Medicine

Full Text
Journal Information
Journal ID (nlm-ta): Theor Biol Med Model
ISSN: 1742-4682
Publisher: BioMed Central
Article Information
Download PDF
Copyright ? 2009 Bi et al; licensee BioMed Central Ltd.
open-access: This is an Open Access article distributed under the terms of the Creative Commons Attribution License (), which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Received Day: 13 Month: 1 Year: 2009
Accepted Day: 26 Month: 6 Year: 2009
collection publication date: Year: 2009
Electronic publication date: Day: 26 Month: 6 Year: 2009
Volume: 6First Page: 10 Last Page: 10
ID: 2709609
Publisher Id: 1742-4682-6-10
PubMed Id: 19558679
DOI: 10.1186/1742-4682-6-10

Antimicrobial breakpoint estimation accounting for variability in pharmacokinetics
Goue Denis Gohore Bi1 Email: gd.gohore.bi@umontreal.ca
Jun Li23 Email: li@crm.umontreal.ca
Fahima Nekka124 Email: fahima.nekka@umontreal.ca
1Facult? de Pharmacie, Universit? de Montr?al, Montr?al, Qu?bec, Canada
2Centre de Recherche Math?matiques, Universit? de Montr?al, Montr?al, Qu?bec, Canada
3Pharsight, Montr?al, Qu?bec, Canada
4Groupe de recherche universitaire sur le m?dicament (GRUM), Universit? de Montr?al, Montr?al, Qu?bec, Canada

Background

Antimicrobial efficiency and resistance have become a global public health issue and a real challenge for microbiologists, pharmaceutical companies, physicians and other members of the health community. Inadequate use of antibiotics promotes the selection of bacteria with decreased susceptibility. The search for new drugs to treat infectious diseases, the traditional approach to overcoming antibiotic resistance, is growing more challenging because multiple-resistance is becoming more prevalent among bacteria, and new targets for antimicrobial antibacterial action remain to be discovered [1-3]. The development of new antimicrobial antibiotics is a long, costly process, which takes a poor second place to the development of more lucrative drugs for an aging population. Therefore, improving the current use of antibiotics is central to preserving their long-term effectiveness in humans and animals. For public health officials, susceptibility testing data are crucial for the surveillance and control of emerging resistance. To collect these data, several susceptibility testing methods including dilution, disk diffusion and automated instrument system methods are currently in routine laboratory use [1-3]. To interpret the susceptibility test results, the breakpoint, a discriminating concentration, has been used to define isolates as susceptible, intermediate or resistant [4-6]. For obvious reasons of drug efficacy and antibiotic resistance problems, estimation of breakpoints has become a necessary step in modern microbiology laboratory practice. Breakpoints are estimated in a variety of ways, the most widely used being the minimal inhibitory concentration (MIC), which is the lowest concentration that completely inhibits microbial growth [1,3,7]. Although the MIC is considered the gold standard for breakpoint assessment, its main drawback lies in its in vitro basis, with no drug disposition information being included. In fact, MIC is a threshold value while antibacterial efficacy is a complex consequence of dynamic concentration- and time-dependent processes. In recent decades, these limitations have led professional groups to make intensive efforts to review pharmacokinetic and clinical data and establish suitable drug breakpoints under in vivo conditions. One of latest tendencies is to integrate PK/PD indices in order to understand the relevance of drug dose and schedule to efficacy [4,8-18]. The breakpoints obtained, generally called pharmacokinetic/pharmacodynamic (PK/PD) breakpoints, refer to the antibacterial concentrations calculated from the knowledge of a PD parameter and the dimension of that parameter for predicting efficacy in vivo [19]. The specific PK/PD indices correlating with bacteriological efficacy mostly depend on the nature of drug action in bacterial killing, which may be either concentration-dependent or time-dependent [20]. There has been a great increase in interest in the use of PK/PD studies to estimate drug efficacy since the foundation of the International Society for Anti-infective Pharmacology (ISAP) in 1991 [20]. Whilst these methods are more realistic as they are adapted to in vivo conditions, they still are empirically based, lacking a theoretical or mechanistic basis. Most importantly, the role of variability between individuals and from other potential sources cannot be explained in a definite way. This situation has clearly restricted the further development of these approaches. Because of this experimental limitation and the complexity of the problem, there is a need to develop new methodologies for drug evaluation. In this work, we provide a theoretical basis for characterizing the "efficiency" of a PK profile under in vivo conditions, which will then be supported by in silico approaches adopted for the two classes of concentration- and time-dependent antibiotic drugs. Using this approach, breakpoints can be explained and estimated within the context of standard PK/PD analysis.

Two patterns of antibiotic performance are often used to regroup antibacterial agents according to their bacterial controlling activities [21-24]. The first pattern, characterized by concentration-dependence, refers to drugs that have bacterial killing capacities covering a wide range of concentrations and effects proportional to concentration. The second one, known as time-dependent pattern is mainly exhibited by drugs with a saturated killing capacity directly linked to exposure time. This class also includes antibiotics of which the action is predominantly bacteriostatic (inhibit bacterial growth). Although there are many reported classes of antimicrobial agents, such agents generally fall into one of these two major patterns [23,25]. Published work about these two groups of drugs shows that the research community is allocating increasing interest to this important topic. Of particular note is the increasing popularity of PK/PD-based methods for predicting and measuring the therapeutic outcomes of these two groups of drugs [20,26]. Table 1 summarises the evolution of research on antimicrobial agents in terms of their activity patterns and the progress in PK/PD-based methods.

This paper is organized as follows: In the Methods Section, we propose a logical extension of the known efficacy function in order to define the efficiency of a PK profile. In the Application and Results Section, we discuss some useful properties of our new approach and apply it to the particular case of variable drug intake. Finally, we give a general discussion to position our approach and findings within the current status of the field.


Methods
Weighted AUC: a rational parameter for assessing PK/PD efficiency

As mentioned in the background, recently introduced PK/PD-based breakpoint estimation was put forward to overcome drawbacks of threshold criteria, namely MIC, which determines in vitro antimicrobial efficacy. However, these PK/PD-based methods use drug exposure mainly through the AUC value (the amount of drug absorbed), whereas the variability in drug concentration time course is not integrated. This variability turns out to be an important factor in drug efficacy, as widely reported [27]. In bioequivalence studies, for example, it is common to combine AUC and Cmax to compare PK profiles and thus indirectly assess the expected drug efficacy. Therefore, to rely solely on the use of these PK parameters may not be sufficient for drawing reliable conclusions on drug efficacy. To employ these parameters efficiently and optimize their use for specific purposes, we need to adapt them by adding more information on drug PK/PD properties.

AUC-based drug efficacy is generally assessed through statistical methods such as scatter plots. Since PK/PD properties are not fully exploited, the relationship between drug efficacy and PK parameters only partially reflects the pharmacological properties. If additional PK/PD properties can be accounted for, the capacity of the actual empirical PK/PD-based breakpoint estimation is likely to be improved. Ideally, when a PK/PD relationship can be determined in vivo, the power of drug efficacy prediction can be maximized. However, exact dose-response relationships under in vivo situations are not easily accessible. This is the main restriction that prevents full exploration of drug efficacy prediction. Alternatively, combining the in vitro efficacy function (E) ? the PK/PD relationship measurable in the laboratory ? with AUC provides a better relationship (being more information-loaded) than that of drug efficacy in terms of AUC. As we will see, this combination can be considered an extension of the definition of AUC, thus relating to specific information on drug response.

In the case of antibiotics, dose-response or concentration-response curves against a microbial agent, also called killing or growth inhibition curves, can more easily be established under in vitro conditions. Several functions, such as linear, sigmoid or logistic, can be used to describe drug efficacy [28-31]. For example, consider drug efficacy E as a probability function expressing inhibition of bacterial growth in response to antibiotic concentrations. It can be modeled as:

[Formula ID: bmcM1]
(1) 

where Emax is the maximum effect (normalized to one in this paper), EC50 the drug concentration that attains 50% of Emax, and H is the Hill constant [31]. Since this efficacy function carries rich information about the response in terms of concentration, it should and could be translated under in vivo conditions. In fact, the in vivo situation can be considered as a composite of many "local" in vitro cases. "Locally in vitro" here means that once the antibiotic reaches a certain site in the body (a target organ for example), it behaves in a similar way as in vitro. In the following, we will include this efficacy function E in our approach to predicting the drug's therapeutic performance and apply it to the case of concentration-dependent antibiotics.

To evaluate the performance of a PK profile, we chose to measure it by the expression efficiency, Eff, defined as follows:

[Formula ID: bmcM2]
(2) 

where again E is a function related to drug efficacy, T is the therapeutic duration used as a reference period and n = 0, 1, ...

Compared to AUC, E here plays the role of a weighting function. We use it to include the information on the PK/PD relationship as an integral part of drug efficiency measurement expressed through Eff. This information can always be updated and integrated for this purpose. For the particular case of E = 1 and n = 1, we obtain the usual AUC definition, thus making our newly introduced efficiency function a direct extension of AUC.

As an illustration, we will show how the newly introduced efficiency function can differentiate between PK profiles with the same AUC. In Figure 1, the two PK profiles share the same AUC but noticeably different AUCW. In fact, this additional information level allows drug evaluation and assessment of therapeutic performance to be refined.

Concentration-dependent antibiotics: weighted AUC method for antimicrobial efficiency

As mentioned, the effects of concentration-dependent antimicrobial agents are known to be proportional to concentration. Their efficacy is generally assessed through pharmacokinetic parameters, namely AUC or Cmax. To characterize the efficiency of concentration-dependent drugs, we propose to use the first order version of the efficiency Eff:

[Formula ID: bmcM3]
(3) 

We notice that Eff1 contains information related to both AUC and concentration variation levels. In this newly proposed formula, these two elements are well integrated to reflect their contributions to the evaluation of drug performance. Eff1 can thus be considered an extension of the classical approach [14]. We refer to Eff1 as the weighted AUC and denote it by AUCW.

Time-dependent antibiotics: an analytic expression for total antimicrobial efficiency

The efficacy of a time-dependent drug depends on the percentage of time during which the concentration exceeds a specific value CBP, generally called the breakpoint. CBP acts as a threshold value: the drug is considered to be fully effective when its concentration is over this value, but non-effective otherwise (Figure 2). For time-dependent drugs, we formulate the efficiency as:

[Formula ID: bmcM4]
(4) 

where E = ? is the indicative function. We recall here that the indicative function ?A of a set A is defined as: ?A (t) = 1 if t belongs to A; 0 otherwise. Hence, expressed in this way, ? will be 1 if C(t) > CBP and will be 0 otherwise. We notice that Eff0 is simply the cumulative time during which C(t) remains above the specific concentration value CBP, which turns out to be exactly the same classic definition for evaluating time-dependent efficacy. However, expressing it in this way, with explicit reference to the zero-order general efficiency Effn function proposed above, helps us to understand the direct relationship of efficiency for different drug groups.


Application and results

In the following, we will focus on concentration-dependent antibiotics to illustrate how the newly introduced weighted AUC method can be used.

Efficiency equivalence between in vivo and in vitro

In pharmacology, estimation of drug efficacy is important for optimizing a drug regimen such that the best therapeutic outcome can be achieved. Generally, this estimation should be performed under in vivo conditions. Since drug concentrations within the body are unavoidably variable, and in vivo-induced randomness may also be superposed, in vivo estimation of drug efficacy is a complex problem. Microbiologists use in vitro-based methods for estimating antibiotic efficacy. These well-controlled in vitro studies can result in useful partial predictors for the in vivo potency of drug-microorganism interactions. Very often, efficacy-drug concentration curves are well established in vitro. This information makes it possible to establish a certain rule for efficacy equivalence between different real PK profiles such that the efficacy of a drug regimen can be objectively judged. Based on the efficiency function introduced above, two PK profiles are ascertained as efficiency-equivalent, i.e.PK1 ? PK2 in efficiency, if and only if they verify the condition:

[Formula ID: bmcM5]
(5) 

More precisely, for concentration-dependent drugs, we can try to find a corresponding in vitro (constant) equivalent concentration Ce that is likely to produce the same efficiency provided by a given PK profile. In this case, for a given PK profile C(t), the corresponding equivalent in vitro concentration Ce is the solution of the equation:

[Formula ID: bmcM6]
(6) 

For time-dependent drugs, the situation is different. The efficiency is the percentage of time during which the concentration remains above a specific value CBP. As in vitro concentrations can only have binary efficiency, we have to determine the threshold of time percentage for an effective drug regime. The efficiency of a PK profile can be compared with this threshold to measure its efficacy.

Weighted AUC method and irregular drug intake

As an application of the AUCW method, we will consider the case of variability in PK profile generated by irregular drug intake. It is common sense that a deviation between real drug intake and the ideal prescribed dosing regimen is likely to have an impact on the pharmacokinetic profile and eventually the drug response. Non-compliance characteristics can be translated into some derived PK/PD parameters and pharmacological indices.

In a previous study, we investigated the impact of animal feeding behaviour on the pharmacokinetics of chlortetracycline (CTC), a widely-used antibiotic usually given through animal feed [32]. We modeled a widely reported animal feeding behaviour and associated it with the CTC disposition model to obtain a feeding behaviour-PK (FBPK) model. Using this model, we revealed the PK variability induced by random drug intake and assessed its main characteristics [32].

In the present paper, we will focus on the estimation of efficiency of CTC in this particular context of irregular drug intake. We have to mention that similar reasoning and analysis can be accomplished using other sources of variability impacting pharmacokinetics. Since CTC is a concentration-dependent antibiotic widely used in collective medical therapy, we will base our analysis on the method we propose for this antibiotic class. For the purpose of illustration, we will use the individual FBPK we previously developed [32]. The case of an animal population can be developed by adding the inter-variability to the associated PK parameters. In the following, we will answer the following questions: Can the "efficacy performance" of PK profile be characterized uniquely by its average concentration value? What is the extent of in vitro equivalent concentrations that an average concentration can reach? Since we only have access to the drug concentration in feed, what can we say about the potential efficacy of various drug concentrations in feed compared to that of MIC?

An advanced PK model integrating swine feeding behaviour: an FBPK model

In veterinary medicine, the problem of optimal use can arise for drugs administered through feed, a widely-used practice for therapeutic, metaphylactic or prophylactic treatment of bacterial infections [33]. As a consequence, animal feeding behaviour directly influences systemic exposure to drugs. However, variation in the feeding behaviour of animals medicated through feed has been overlooked for more than 50 years, during which feed antibiotic therapy remained empirical. Using widely-reported descriptions of swine feeding behaviour, we have mathematically formulated and integrated this behaviour model into a PK model (FBPK) in order to analyze its influence on systemic exposure to drugs quantitatively [32]. We include here a brief review of the FBPK model. Complete details about the model and its analysis can be found in [32].

The feeding behaviour model consists of two typical daily feeding activities: routine peak periods complemented by inter-peak periods of free access to feed. The routine peak periods correspond to intense feeding activities generally referred to as morning and afternoon peaks. Meals consumed between peak periods are referred to as inter-peak meals. The time intervals between two successive inter-peak meals are reported to follow a Weibull distribution. Since the animal consumes the feed in a quasi-continuous manner during the peak periods, and considering the low elimination rate of CTC, we have modeled the feeding activity during these periods as an infusion process, which gives rise to the following concentration time-course:

[Formula ID: bmcM7]
(7) 

[Formula ID: bmcM8]
(8) 

where [Ts, Te] is the duration of the peak period, DOSE is the drug concentration mixed in the feed, with units in ppm, is the average ingestion rate, F is the bioavailability, Ka and Ke are the absorption and elimination rates respectively, and V is the volume of distribution.

Inter-peak meals are modeled as individual boluses entering the gastrointestinal tract because their durations are relative short compared to the inter-meal intervals. A two-parameter Weibull distribution is used to account for these irregular feeding events of free access to feed. Figure 3 illustrates a typical PK profile of an animal receiving 500 ppm of drug mixed through feed.

Estimation of MIC breakpoints in animal populations

By definition, MIC breakpoints refer to critical drug concentrations that characterize specific antibacterial activities. The values of these MIC breakpoints are highly pertinent to the pharmacokinetic properties as well as to the pharmacodynamic killing capacities of these drugs with respect to particular bacterial strains. In the clinical setting, MIC is considered an important reference index in choosing effective dose regimens. However, because of the evident large variation in concentration time course and the unavoidable pharmacokinetic variability under the in vivo situation, the true PK/PD relationship is generally more complex. Using a single static value of MIC for the decision process is dubious or even misleading. Therefore we have to take account of dynamic in vivo properties when estimating drug efficacy.

In the following, we will use the above-developed feeding behaviour-PK model to show how one can obtain breakpoint information, and of what kind, for an in vivo situation.

To do this, we adopt a Monte Carlo approach to generate, for an animal X, possible drug inputs prior to drug disposition. The corresponding concentration time courses are then produced with these drug inputs. To explain our approach, we need to introduce some new concepts and their notations.

? DOSE: drug concentration mixed in feed, with units of ppm.

? : average over a time duration T of one concentration time course generated by Monte Carlo; it is AUC-based.

? : global mean of all average concentrations .

? : 95% higher mean concentration where 95% of are below this concentration.

? : 95% lower mean concentration where 95% of are above this concentration.

? : in vitro equivalent concentration (Eq. 2) of Ci(t), where 0 ? t ? T; it is AUCW-based.

? : global mean of all in vitro equivalent concentrations .

? 95% higher in vitro equivalent concentrations , where 95% of are below this concentration

? : 95% lower in vitro equivalent concentrations , where 95% of are above this concentration.

Using the FBPK model, we can estimate the above concentrations versus DOSE (Figure 4). This figure shows the 95% confidence intervals of in vitro equivalent concentrations and average concentrations in terms of DOSE. For example, given a DOSE = 400 ppm, we obtain [ , ] = [0.417 mg/L, 0.450 mg/L] and

[ , ] = [0.397 mg/L, 0.435 mg/L].

We can consider that a DOSE is at least 95% efficiency-equivalent to an in vitro concentration Ceff by defining 95% of equivalent in vitro concentrations generated by this DOSE as being above Ceff. In our case, for a given DOSE, we have the relationship Ceff = (Dose) according to this 95% efficiency-equivalence criterion.

However, with each DOSE, we can also associate a 95% confidence interval of average concentrations represented by [ (Dose), (Dose)] as illustrated in the right panel of Figure 4.

Then for each at least 95% efficiency-equivalent in vitro concentration , it corresponds an interval of average concentrations [ , ]. This clearly indicates that under in vivo situations, we have an associated uncertainty in average concentrations that may correspond to the same specific PK efficiency value. In other words, the in vivo average concentration when used as a breakpoint to indicate the efficacy of a dosing regimen can only be interpreted probabilistically. This result is reported in Figure 5.

To a given target value Ce (in vitro target), there corresponds a DOSE that gives an interval of equivalent concentrations (hence equivalent efficacy) lying above Ce.

However, a given average concentration , which is in fact measured theoretically (using AUC for example), may be the result of many different DOSEs. We can write this corresponding interval as [DOSElow, DOSEhigh] as a function of . For DOSElow, the lowest in vitro equivalent concentration that can be attained by in the sense of 95% probability will be given by (DOSElow). The same applies to DOSEhigh, where the highest in vitro equivalent concentration that can be attained by in the sense of 95% probability is given by (DOSEhigh). Hence, for each , there is a corresponding whole interval of possible in vitro equivalent concentrations given by these two extreme values and denoted by [ (DOSElow), (DOSEhigh)]. This result is reported in Figure 6. The illustrated (one-to-one) relationship between and DOSE highlights the possibility (need) to dissociate between the average concentration and efficacy, thus questioning the general practice of evaluating efficacy through average concentrations.

To answer the third question, we consider a MIC = 0.5 mg/L, which is the breakpoint normally used in practice for the evaluation of CTC efficacy. For different values of DOSE, we estimate the probability of the in vitro equivalent concentrations with values above MIC. A plot of these probabilities versus DOSE is given in Figure 7. We can see that for low DOSE values, it is almost certain that the therapy is non-efficient while the opposite is the case for high DOSE where success is almost secured. However, there is a critical zone of drug concentration in feed (DOSE) within which a given DOSE has a certain potential of success or failure.

Robustness of weighted AUC approach

Here, we will explain and illustrate some advantageous properties of AUCW compared to AUC. In its integration formula, the AUCW method incorporates the in vitro efficacy function E, thus penalising lower drug concentrations in an appropriate way. Hence, AUCW constitutes an improvement over AUC since the nonlinearity principle in drug efficiency is respected (Figure 8, right panel). Also, AUCW proves to be robust in terms of the efficacy function E, which represents an important feature when it comes to application. Indeed, we have generated AUCW for three efficacy functions, namely the linear, Emax and logistic functions. These functions along with the corresponding AUCW are plotted in Figure 8, left and right panels respectively. For sake of comparison, the AUC is also depicted on the right panel. This figure shows that the difference between AUC and AUCW is more noticeable than that of the three generated AUCWs.


Discussion

Unlike the ideal in vitro conditions, where major guidelines for drug efficacy are routinely established for stable drug concentrations, it is natural that high variability arises in vivo and thus raises concerns about the applicability of in vitro-established principles. This in vivo variability may have various origins and forms [34,35]. One of these sources is structural and is directly linked to drug disposition and elimination processes (generally referred to by ADME: Absorption, Distribution, Metabolism and Elimination), where the drug concentration time course is often described using ordinary differential equations. These ADME scenario components are generally mimicked, separately, under laboratory conditions but hardly synthesized as a whole. The well known PK parameters such as AUC and Cmax are specifically designed to reflect this drug exposure variation in the PK/PD association. Beyond this structural variability, other pharmacokinetic variability is widely recognized and turns out to be an important influence on drug efficacy. Neglecting variability when assessing therapeutic efficacy may lead to wrong conclusions [32,35-37]. In the current article, we have shown how, instead of relying solely on AUC or other single parameters, the entire (in vitro or in vivo) pharmacodynamic function should be considered in a more integrated way for evaluating and developing antibiotic treatment protocols. Being concerned with this issue, we have directly generalized the classical AUC-based methods and rendered drug evaluation more efficient by including richer information on the PK profile.

As a static efficacy-threshold parameter widely used for breakpoint assessment, MIC does not include drug disposition or other potential variability information. In fact, MIC is measured under almost deterministic conditions since variability is likely to be smaller in vitro than in vivo. However, antibacterial efficacy is the result of a complex dynamic process that depends on concentration and time. Hence, relying on such in vitro values may be risky since real in vivo values can spread over a relatively large range. Generally, these in vitro values are used to refer to mean in vivo values. However, we have seen here that using the average concentration as a reference value can lead to ambiguous interpretation of drug efficacy since various PK profiles are likely to share the same average concentration while having different therapeutic performances. Under in vivo conditions, all these parameters should be reconsidered and adapted to reflect this varying situation. In this context, it is thus common sense to have recourse to a probabilistic approach, as we illustrated in the examples above.

Another interesting issue arising directly from our method concerns bacterial antibiotic resistance. It is known that under-exposure of bacterial strains to antibiotics is the main cause of resistance. When traditional exposure indices such as AUC or Cmax are used to evaluate drug efficacy, the prediction is linearly related to antibiotic exposure. Since these derived indices are proportional to dose, the real mechanism of drug killing is not incorporated as the linear property remains unchanged when either drug exposure or dose is used. In some recent work, a trend in this direction can be noticed [28,38-40]. Using our efficiency evaluation approach, we observe that for low doses the traditional AUC-based method gives an optimistic efficacy evaluation as the drug killing properties are ignored in its expression form. However, when we account for killing properties through the efficacy curve as we did in our efficiency formula, we clearly see that the drug efficacy evolves more slowly than the corresponding dose. In our example, under a 500 ppm DOSE, the drug efficiency estimated using our method is half that of the AUC-based method. Hence, for lower doses, there is a good chance of being in low efficiency situations where the risk of antibiotic resistance is higher than can be assessed using traditional methods. These results suggest that further investigation in this direction is needed, especially because lower doses are usually related to irregular drug intake, such as drug holidays or cases of antibiotic abuse. We believe that more advanced methods should be developed to address this problem. Our approach is one step towards this end. We propose here a logical way of evaluating drug efficiency on the basis of in vitro efficacy information and the PK profile. This can be relevant to antibiotic development, especially for the estimation of the efficacy dose in phase II. In this work, we have used killing curves to illustrate our methods. This does not prevent extension of our approach to other antibacterial drugs. In fact, we have already suggested a possible approach for time-dependent drugs. However, for other complex types of effect, there is a need for further investigation of the mechanism and for embedding the results in the efficiency form that we proposed. In fact, the complex facets of antibacterial activities are not limited to this simple classification. For some antibiotics, such as glycopeptides, a combination of concentration and time of exposure may both be relevant [7,26]. The coexistence of bactericidal and bacteriostatic properties in these drugs makes them co-dependent on both concentration and time. Nonetheless, the classification into concentration-dependent and time-dependent suggested by the ISAP for antibiotics provides an objective basis for judging antibiotic performance. It is interesting to note that these two patterns fall within the two extreme cases of antibiotic efficacy, as illustrated by the curves of Figure 2[28].

Finally, owing to the complexity of biological systems ? the human body here, as well as the mechanisms involved in the bacteria killing capacities of drugs ? new methods are being developed every day. Some of them use very sophisticated theories that include every known facet of mechanism; others seek to ignore these complexities and use elementary mathematics with an empirical philosophy. The former struggle with the applicability of their methods, while the latter often lack logistic links to the underlying mechanism. A trade-off should be found to balance these tendencies. We think that our article may inspire progress on this path.


Conclusion

In this paper, we have proposed a logical generalisation of the classical AUC method by introducing the "efficiency" of a PK profile, which involves the efficacy function as a weight. We have formulated these methods for both classes of concentration-dependent and time-dependent antibiotics. We have illustrated the approach developed using the particular case of variable drug intake. We have also shown how the new approach can overcome some limitations of the classical methods for assessing drug efficacy.


Competing interests

The authors declare that they have no competing interests.


Authors' contributions

GDG participated in the initiation and worked on the whole study including the results, outline, writing, and editing of the manuscript. The study was conducted under the main supervision of JL and FN, who were involved in the conception of this work, including the methodology and the writing of this paper for its intellectual content. All authors have read and approved the final manuscript.


Acknowledgements

This work has been supported by NSERC through NSERC UFA and NSERC grant (RGPIN-227118), hold by F. Nekka. The Centre of Excellence in Mathematics of Information Technology and Complex Systems (MITACS) is also acknowledged for its support as well as the Centre de Recherches Math?matiques (CRM) and Facult? de Pharmacie of Universit? de Montr?al.


References
Bryskier A. Andr? Bryskierantibacterials and antifungals. 2005Washington, D.C: ASM Press;
Fauch?re J-L. Bact?riologie g?n?rale et m?dicale/Jean-Louis Fauch?re, Jean-Loup Avril. 2002Paris: Ellipses;
Robert-Dernuet S. Antibiotiques et antibiogrammes/Sabine Robert-Dernuet; pr?face de Michel Laverdi?re; [illustrations, Bertrand Lachance. 1995Paris: Vigot;
MacGowan AP,Wise R. Establishing MIC breakpoints and the interpretation of in vitro susceptibility testsJ Antimicrob Chemother 2001;48:17–28. [pmid: 11420334]
Jorgensen JH. Who defines resistance? The clinical and economic impact of antimicrobial susceptibility testing breakpointsSemin Pediatr Infect Dis 2004;15:105–108. [pmid: 15185194] [doi: 10.1053/j.spid.2004.01.014]
Sahm DF,Thornsberry C,Mayfield DC,Jones ME,Karlowsky JA. In vitro activities of broad-spectrum cephalosporins against nonmeningeal isolates of Streptococcus pneumoniae: MIC interpretation using NCCLS M100-S12 recommendationsJ Clin Microbiol 2002;40:669–674. [pmid: 11825993] [doi: 10.1128/JCM.40.2.669-674.2002]
Aliabadi FS,Lees P. Pharmacokinetics and pharmacodynamics of danofloxacin in serum and tissue fluids of goats following intravenous and intramuscular administrationAm J Vet Res 2001;62:1979–1989. [pmid: 11763192] [doi: 10.2460/ajvr.2001.62.1979]
Aliabadi FS,Ali BH,Landoni MF,Lees P. Pharmacokinetics and PK-PD modelling of danofloxacin in camel serum and tissue cage fluidsVet J 2003;165:104–118. [pmid: 12573598] [doi: 10.1016/S1090-0233(02)00258-7]
Ambrose PG. Monte Carlo simulation in the evaluation of susceptibility breakpoints: predicting the future: insights from the society of infectious diseases pharmacistsPharmacotherapy 2006;26:129–134. [pmid: 16506354] [doi: 10.1592/phco.2006.26.1.129]
Andes D,Anon J,Jacobs MR,Craig WA. Application of pharmacokinetics and pharmacodynamics to antimicrobial therapy of respiratory tract infectionsClin Lab Med 2004;24:477–502. [pmid: 15177850] [doi: 10.1016/j.cll.2004.03.009]
Craig WA. Pharmacokinetic/pharmacodynamic parameters: rationale for antibacterial dosing of mice and menClin Infect Dis 1998;26:1–10. quiz 11?12 [pmid: 9455502] [doi: 10.1086/516284]
Drusano GL. Infection in the intensive care unit: beta-lactamase-mediated resistance among Enterobacteriaceae and optimal antimicrobial dosingClin Infect Dis 1998;27:S111–116. [pmid: 9710679] [doi: 10.1086/514915]
Drusano GL,Preston SL,Hardalo C,Hare R,Banfield C,Andes D,Vesga O,Craig WA. Use of preclinical data for selection of a phase II/III dose for evernimicin and identification of a preclinical MIC breakpointAntimicrob Agents Chemother 2001;45:13–22. [pmid: 11120938] [doi: 10.1128/AAC.45.1.13-22.2001]
Jacobs MR. Optimisation of antimicrobial therapy using pharmacokinetic and pharmacodynamic parametersClin Microbiol Infect 2001;7:589–596. [pmid: 11737083] [doi: 10.1046/j.1198-743x.2001.00295.x]
Jacobs MR. How can we predict bacterial eradication?Int J Infect Dis 2003;7:S13–20. [pmid: 12839703] [doi: 10.1016/S1201-9712(03)90066-X]
Mouton JW. Breakpoints: current practice and future perspectivesInt J Antimicrob Agents 2002;19:323–331. [pmid: 11978503] [doi: 10.1016/S0924-8579(02)00028-6]
Mouton JW,Dudley MN,Cars O,Derendorf H,Drusano GL. Standardization of pharmacokinetic/pharmacodynamic (PK/PD) terminology for anti-infective drugsInt J Antimicrob Agents 2002;19:355–358. [pmid: 11978507] [doi: 10.1016/S0924-8579(02)00031-6]
Mouton JW,van Ogtrop ML,Andes D,Craig WA. Use of pharmacodynamic indices to predict efficacy of combination therapy in vivoAntimicrob Agents Chemother 1999;43:2473–2478. [pmid: 10508027]
Turnidge J,Paterson DL. Setting and revising antibacterial susceptibility breakpointsClin Microbiol Rev 2007;20:391–408. table of contents [pmid: 17630331] [doi: 10.1128/CMR.00047-06]
Barger A,Fuhst C,Wiedemann B. Pharmacological indices in antibiotic therapyJ Antimicrob Chemother 2003;52:893–898. [pmid: 14613960] [doi: 10.1093/jac/dkg482]
Craig WA. Interrelationship between pharmacokinetics and pharmacodynamics in determining dosage regimens for broad-spectrum cephalosporinsDiagn Microbiol Infect Dis 1995;22:89–96. [pmid: 7587056] [doi: 10.1016/0732-8893(95)00053-D]
Craig WA. Antibiotic selection factors and description of a hospital-based outpatient antibiotic therapy program in the USAEur J Clin Microbiol Infect Dis 1995;14:636–642. [pmid: 7588857] [doi: 10.1007/BF01690745]
Eagle H,Fleischman R,Levy M. "Continuous" vs. "discontinuous" therapy with penicillin; the effect of the interval between injections on therapeutic efficacyN Engl J Med 1953;248:481–488. [pmid: 13036982]
Jaffe HW,Schroeter AL,Reynolds GH,Zaidi AA,Martin JE Jr,Thayer JD. Pharmacokinetic determinants of penicillin cure of gonococcal urethritisAntimicrob Agents Chemother 1979;15:587–591. [pmid: 464590]
Shah PM,Junghanns ,Stille W. [Bactericidal dosie-activity relationships with E. coli, K. pneumoniae and Staph. aureus (author's transl)]Dtsch Med Wochenschr 1976;101:325–328. [pmid: 174881]
Gunderson BW,Ross GH,Ibrahim KH,Rotschafer JC. What do we really know about antibiotic pharmacodynamics?Pharmacotherapy 2001;21:302S–318S. [pmid: 11714222] [doi: 10.1592/phco.21.18.302S.33905]
Sheiner LB,Beal S,Rosenberg B,Marathe VV. Forecasting individual pharmacokineticsClin Pharmacol Ther 1979;26:294–305. [pmid: 466923]
Czock D,Keller F. Mechanism-based pharmacokinetic-pharmacodynamic modeling of antimicrobial drug effectsJ Pharmacokinet Pharmacodyn 2007;34:727–751. [pmid: 17906920] [doi: 10.1007/s10928-007-9069-x]
Mueller M,de la Pena A,Derendorf H. Issues in pharmacokinetics and pharmacodynamics of anti-infective agents: kill curves versus MICAntimicrob Agents Chemother 2004;48:369–377. [pmid: 14742182] [doi: 10.1128/AAC.48.2.369-377.2004]
Zhi J,Nightingale CH,Quintiliani R. A pharmacodynamic model for the activity of antibiotics against microorganisms under nonsaturable conditionsJ Pharm Sci 1986;75:1063–1067. [pmid: 3102718] [doi: 10.1002/jps.2600751108]
Strenkoski-Nix LC,Forrest A,Schentag JJ,Nix DE. Pharmacodynamic interactions of ciprofloxacin, piperacillin, and piperacillin/tazobactam in healthy volunteersJ Clin Pharmacol 1998;38:1063–1071. [pmid: 9824789] [doi: 10.1177/009127009803801112]
Li J,Petit-Jette CE,Gohore Bi D,Fenneteau F,Del Castillo JR,Nekka F. Assessing pharmacokinetic variability directly induced by drug intake behaviour through development of a feeding behaviour-pharmacokinetic modelJ Theor Biol 2008;251:468–479. [pmid: 18234231] [doi: 10.1016/j.jtbi.2007.11.033]
Ungemach FR,Muller-Bahrdt D,Abraham G. Guidelines for prudent use of antimicrobials and their implications on antibiotic usage in veterinary medicineInt J Med Microbiol 2006;296:33–38. [pmid: 16520092] [doi: 10.1016/j.ijmm.2006.01.059]
Meyer UA,Peck CC. The drug holiday pattern of noncompliance in clinical trials: challenge to conventional concepts of drug safety and efficacy. 1997Washington, DC: Center for Drug Development Science, Georgetown University;
Harter JG,Peck CC. Chronobiology. Suggestions for integrating it into drug developmentAnn N Y Acad Sci 1991;618:563–571. [pmid: 2006810] [doi: 10.1111/j.1749-6632.1991.tb27276.x]
Sheiner LB,Steimer JL. Pharmacokinetic/pharmacodynamic modeling in drug developmentAnnu Rev Pharmacol Toxicol 2000;40:67–95. [pmid: 10836128] [doi: 10.1146/annurev.pharmtox.40.1.67]
Li J,Nekka F. A pharmacokinetic formalism explicitly integrating the patient drug complianceJ Pharmacokinet Pharmacodyn 2007;34:115–139. [pmid: 17053982] [doi: 10.1007/s10928-006-9036-y]
Corvaisier S,Maire PH,Bouvier d'Yvoire MY,Barbaut X,Bleyzac N,Jelliffe RW. Comparisons between antimicrobial pharmacodynamic indices and bacterial killing as described by using the Zhi modelAntimicrob Agents Chemother 1998;42:1731–1737. [pmid: 9661013]
Lipsitch M,Levin BR. The population dynamics of antimicrobial chemotherapyAntimicrob Agents Chemother 1997;41:363–373. [pmid: 9021193]
Agwuh KN,MacGowan A. Pharmacokinetics and pharmacodynamics of the tetracyclines including glycylcyclinesJ Antimicrob Chemother 2006;58:256–265. [pmid: 16816396] [doi: 10.1093/jac/dkl224]

Figures

[Figure ID: F1]
Figure 1 

The left panel depicts two PK profiles with the same AUC (23.6 mg ? h/L). The solid curve illustrates rapid absorption while the dashed curve corresponds to slower absorption. The right panel depicts the corresponding efficacy vs time curves, which still show the difference in the PK profiles of the left panel; this difference is translated into the values of the corresponding efficiency AUCW (17.45 vs 14.40 mg ? h/L). The efficacy of the high absorption regime lasts almost throughout the therapeutic period (24 h) beyond the target efficacy of 0.8 mg.h/L, while the lower absorption regime barely reaches this target.



[Figure ID: F2]
Figure 2 

Illustration of efficacy vs. concentration of the two groups of antimicrobial agents. The time-dependent microbial agent in the left panel has an efficiency of all or none, i.e. there is a threshold concentration above which the drug is considered to be fully effective, and below which it is non-effective. The performance of the concentration-dependent antimicrobial agent in the right panel is known to be proportional to concentration.



[Figure ID: F3]
Figure 3 

A typical plasma drug concentration under conditions of irregular drug intake, with DOSE = 500 ppm CTC mixed in the animal feed.



[Figure ID: F4]
Figure 4 

The left panel shows the in vitro equivalent concentrations versus DOSE; the solid, dotted and dash-dot lines are , , respectively. The right panel shows the average concentrations versus DOSE; the solid, dotted and dash-dot lines are , , respectively.



[Figure ID: F5]
Figure 5 

In vivo mean concentrations versus in vitro equivalent concentrations.



[Figure ID: F6]
Figure 6 

In vitro equivalent concentrations versus in vivo average concentrations.



[Figure ID: F7]
Figure 7 

Therapeutic success probability across DOSEs. MIC = 0.5 mg/L.



[Figure ID: F8]
Figure 8 

Robustness of weighted AUC method. Left panel represents the three most widely used efficacy functions E: solid line for the linear function, broken line for the Emax function and dotted line for the logistic function. The corresponding AUCW are plotted in the right panel with respect to concentration, along with AUC (solid thick line). The difference in AUCW value estimated for these three efficacy functions is negligible compared to the differences from AUC.



Tables
[TableWrap ID: T1] Table 1 

Report on the antibacterial agents for different activity patterns and methods*


Year
Types or Methods 1970?1980 1981?1990 1991?2000 2001?2008 Drugs or parameters
Time-dependent 15 60 104 228 Beta-lactams
Macrolides

Concentration-dependent 10 80 225 315 Aminoglycosides
Fluoroquinolone

PK/PD-based methods 0 20 141 401 AUC24/MIC
Cmax/MIC
CBP
T>MIC

*The data reported in this Table have been collected using Ovid Medline? with the following keywords: concentration-dependent; time-dependent; antibiotic; antimicrobial; PK/PD; breakpoint; efficacy.

Some antibacterial agents such as glycopeptides and some beta-lactams are referred to as being co-dependent.



Article Categories:
  • Research


Previous Document:  Retention of the virus-derived sequences in the nuclear genome of grapevine as a potential pathway t...
Next Document:  Effectiveness of a tinnitus management programme: a 2-year follow-up study.