The aim of our study was to compare primary three-dimensional (3D) and primary two-dimensional (2D) review methods for CT colonography with regard to polyp detection and perceptive errors. CT colonography studies of 77 patients were read twice by three reviewers, first with a primary 3D method and then with a ...

The aim of this study was to determine the normal computed tomography (CT) appearance of the vertebral column and coelomic structures of the loggerhead sea turtle (Caretta caretta) and to use three-dimensional (3D) and multiplanar reconstructions to indicate the position of each organ in relation to the vertebrae and carapace. ...

A rare, complete ancient Roman burial site was discovered near the Dutch village of Bocholtz. In addition to many preserved grave offerings, there were countless fragments of deteriorated glass objects still buried in the ground. This glass was in very poor condition, however, and there was no possibility of excavating ...

Many assessments of craniofacial malformations are generally undertaken to assist in surgical intervention including physical examination, cephalometric radiographs in anteroposterior and lateral views, stereolithographic models, and anthropometric measurements integrated with three-dimensional computed tomography (3-D CT) reconstructions to quantify skeletal deformities. In the present report, the use of 3-D Malformation Analysis, ...

AIM: The aim of this study was to show the morphology of the carious lesion in dentine in three dimensions (3D). DESIGN: A novel high-definition X-ray microtomography (XMT) scanner was used to scan 10 carious primary molars at a resolution of 15 x 15 x 15 microm3. A stack of ...

BACKGROUND: Three-dimensional (3D) reconstruction of the heart and surrounding structures has been supplementing traditional two-dimensional imaging to guide diagnostic and therapeutic electrophysiologic procedures. Current methods using computed tomography (CT)/magnetic resonance imaging (MRI) reconstruction have certain limitations. OBJECTIVE: We investigated the feasibility of rotational angiography (RA) combined with simultaneous esophagogram to ...

Modern computed tomography (CT) scanners use cone-beam configurations for increasing volume coverage, improving x-ray-tube utilization, and yielding isotropic spatial resolution. Recently, there have been significant developments in theory and algorithms for exact image reconstruction from cone-beam projections. In particular, algorithms have been proposed for image reconstruction on chords; and advantages ...

There has been no objective means for imaging the three-dimensional (3D) morphology of the clitoris-a poorly understood, complex structure. A Live 3D ultrasound system with a matrix-array transducer was used for data acquisition from eight women. The transducer was positioned in front of and about 3 cm away from the ...

In recent years, three-dimensional (3D) multiplanar reformatted images from conventional cross-sectional computed tomographic (CT) data have been increasingly used to better demonstrate the anatomy and pathologic conditions of various organ systems. Three-dimensional volume-rendered (VR) CT images can aid in understanding the temporal bone, a region of complex anatomy containing multiple ...

OBJECTIVES: The objectives of this study were to investigate the feasibility of clinical application of magnetic resonance (MR) virtual endoscopy as a presurgical procedure before sialoendoscopy and to evaluate its value in the diagnosis of obstructive salivary gland diseases and preoperative visualization of endoluminal views. STUDY DESIGN: This study presents ...

Ectopic stomal varices are an unusual cause of gastrointestinal hemorrhage. The term "ectopic stomal varices" means abnormally dilated veins that have developed in the stomal mucosa. We describe the 2D reformatted and 3D volume rendered images by MDCT in a patient with an episode of acute bleeding from the colonic ...

BACKGROUND: Recent advances in multi-detector row CT (MD-CT) technology provide new opportunities for clinical diagnoses of various diseases. Here we assessed CT virtual duodenoscopy, duodenography and 3D multi-cholangiography created by MD-CT for clinical diagnosis of duodenal malignant lesions. METHODS: The study involved seven cases of peri-duodenal carcinoma (four ampullary carcinomas, ...

Although the diagnosis of osteoporosis is mainly based on dual x-ray absorptiometry, it has been shown that trabecular bone micro-architecture is also an important factor in regard to fracture risk. In vivo, techniques based on high-resolution x-ray radiography associated to texture analysis have been proposed to investigate bone micro-architecture, but ...

Time-resolved 3D MRI with high spatial and temporal resolution can be achieved using spiral sampling and sliding-window reconstruction. Image reconstruction is computationally intensive because of the need for data regridding, a large number of temporal phases, and multiple RF receiver coils. Inhomogeneity blurring correction for spiral sampling further increases the ...

INTRODUCTION: The detailed knowledge of the individual pulmonary vein (PV) anatomy may help to prevent serious complications during PV isolation (PVI). The purpose of this study was to determine the geometry of the PV ostia and their spatial relation to adjacent structures in external (ex 3D) and endoluminal (en 3D) ...

Major airway obstruction due to broncholithiasis produces significant morbidity, and management is difficult. Many of the patients are elderly and are not good candidates for surgical removal. Bronchoscopic removal may be limited due to anatomic considerations, skill of the bronchoscopist, and exposure of the patient to additional procedural risks. Preprocedural ...

The purpose of the present study was to investigate the feasibility and usefulness of three-dimensional (3D) multislice computed tomography (CT) angiography with maximum intensity projection (MIP) and volume rendering (VR) in six dogs with clinical and sonographic findings suggestive of portosystemic shunt. Furthermore, we aimed to estimate the diameter of ...

Excision of a choledochal cyst followed by biliary reconstruction with a Roux-en-Y hepaticojejunostomy is the treatment of choice for type I and IV choledochal cysts. We present a rare complication which was identified 8 years after the original reconstructive surgery. Conventional imaging modalities failed to identify the pathology. Only a ...

Helical cone-beam CT is used widely nowadays because of its rapid scan speed and efficient utilization of x-ray dose. Recently, an exact reconstruction algorithm for helical cone-beam CT was proposed (Zou and Pan 2004a Phys. Med. Biol. 49 941-59). The algorithm is referred to as a backprojection-filtering (BPF) algorithm. This ...

Detecting cancerous lesions is one major application in emission tomography. In this paper, we study penalized maximum-likelihood image reconstruction for this important clinical task. Compared to analytical reconstruction methods, statistical approaches can improve the image quality by accurately modelling the photon detection process and measurement noise in imaging systems. To ...

BACKGROUND: Virtual endoscopy (VE) is a new and promising imaging technology. Applied to neuroendoscopy it allows preoperative simulation of a procedure and evaluation of the individual intraventricular anatomy in selected cases. Along with neuronavigation and real time intraoperative imaging, VE is expected to improve the safety and efficacy of neuroendoscopic ...

Preoperative three-dimensional images with surface venous anatomy may be used in the planning of a linear scalp incision and the opening site of the dura mater for protection of surface veins during surgical dissection, and to find the splitting site of the brain according to the lesion. In 45 patients ...

CT scanning is an integral part of the urologist's practice today. It is the most commonly used imaging modality and the one with which urologists are most familiar. CT urography, CT angiography, and 3D reconstruction enable the urologist to perform comprehensive evaluations of patients who have different urologic diseases, using ...

Recently, several techniques have been developed to improve the quality of computed tomography (CT) images of the thoracic and abdominal region that are degraded by the interference of the scanning process and respiration. Several devices for respiratory-correlated CT are available for clinical usage. They are based on the synchronization of ...

16 slice multidetector CT provides virtual endoscopic views of the inside of arteries, or any other hollow structures. This is performed non-invasively using post-processing of three-dimensional isotropic image data sets, acquired during standard CT examinations. These virtual endoscopic views are simultaneously correlated with the standard multiplanar reconstructions, with the ability ...

The circular scanning trajectory is one of the most widely adopted data-acquisition configurations in computed tomography (CT). The Feldkamp, Davis, Kress (FDK) algorithm and its various modifications have been developed for reconstructing approximately three-dimensional images from circular cone-beam data. When data contain transverse truncations, however, these algorithms may reconstruct images ...

Computer-based surgery simulation is a rapidly emerging and increasingly important area of research that combines a number of disciplines for the common purpose of improving healthcare. The objective of this paper is to provide a virtual surgery (VISU) tool for accurately planning the aesthetic impact of hard and soft tissue ...

In medical helical cone-beam CT, it is common that the region-of-interest (ROI) is contained inside the helix cylinder, while the complete object is long and extends outside the top and the bottom of the cylinder. This is the Long Object Problem. Analytical reconstruction methods for helical cone-beam CT have been ...

Recent advances in computed tomographic (CT) technology, three-dimensional imaging software, and cheaper data storage capacity have made faster, simpler, and more accurate gastric imaging available. Two-dimensional multiplanar reformation and CT gastrography including virtual gastroscopy and transparency rendering allow multiplanar cross-sectional imaging, gastroscopic viewing, and upper gastrointestinal series imaging in the ...

INTRODUCTION: The aim of this investigation was to explore the validity of 3-dimensional (3D) spiral computed tomographic (CT) images to examine impacted teeth before surgical or orthodontic treatment. METHODS: Two patients with impacted teeth were examined with both spiral CT and traditional radiographs. RESULTS: 3D CT images clearly showed the ...

Phase-correlated CT, as it is used for cardiac imaging, is the most popular and the most important but also the most demanding special CT application in the clinical routine, today. Basically, it fulfills the four-dimensional imaging task of depicting a quasiperiodically moving object at any desired motion phase with significantly ...

The objective of this pilot project was to devise a new image acquisition and processing technique to produce PET/CT images rendered in 3-dimensional (3D) volume that can then be reviewed in several 3D formats such as virtual bronchoscopy and colonoscopy "fly-throughs" and external "fly-arounds." METHODS: We tested the new imaging ...

BACKGROUND: Numerous modalities have been used to diagnose and characterize noncompaction of ventricular myocardium (NCVM) including magnetic resonance imaging, two-dimensional echocardiography (2DE), contrast-enhanced 2DE, and angiography. The current case series examines the use of real-time three-dimensional transthoracic echocardiography (RT-3DE) in four such cases of NCVM. METHODS: From December 2003 to ...

The computed tomography technique cannot easily be extended to diffraction enhanced imaging (DEI) because, while from DEI we may extract the refractive index gradient in one dimension, from the conventional CT reconstruction algorithm we may reconstruct only a scalar quantity. However, recently we showed that changing the direction of the ...

We give an overview of the role of Physics in Medicine and Biology in the development of tomographic reconstruction algorithms. We focus on imaging modalities involving ionizing radiation, CT, PET and SPECT, and cover a wide spectrum of reconstruction problems, starting with classical 2D tomography in the 1970s up to ...

Being able to accurately choose an optimal view for stent positioning, non foreshortened length and to avoid side branches is imperative during therapeutic procedures. Traditional imaging limitations may include the selection of an incorrectly sized stent, inaccurate placement, and/or the need for additional stents. With the use of newer acquisition ...

OBJECTIVE: The purpose of this study was to investigate in vitro the accuracy of three-dimensional (3D) magnetic resonance imaging (MRI) to measure the mandible. STUDY DESIGN: The optimal MRI sequence for 3D mandible from the data of 2 volunteers was determined to be 3D vibe. MRI and computed tomography (CT) ...

Three-dimensional (3D)-based detection and diagnosis has an important role for significantly improving the detection and diagnosis of lung cancer upon computed tomography (CT). This report presents a 3D-based method for segmenting and visualizing lung volume by using CT images. An anisotropic filtering method was developed on CT slices to enhance ...

A basic assumption in the classic computed tomography (CT) theory is that an object remains stationary in an entire scan. In biomedical CT/micro-CT, this assumption is often violated. To produce high-resolution images, such as for our recently proposed clinical micro-CT (CMCT) prototype, it is desirable to develop a precise motion ...

We report two cases of deep tracheal laceration in female patients after balloon dilation for benign tracheobronchial stenosis. Immediate post-procedure bronchoscopy and CT including 3D reconstructions showed deep lacerations in the posterior tracheal wall. Clinically, the patients' dyspnoea subsided and there has been no recurrence during follow-up after balloon dilation. ...

Virtual bronchoscopy is a new method for viewing helical/spiral computed tomography (CT) images of the tracheobronchial trees. Using commercially available software to process the CT data, the tracheobronchial trees can be inspected through a series of three-dimensional images. Recently, this technique has been increasingly used to detect benign and malignant ...

Long acquisition times, low resolution, and voxel contamination are major difficulties in the application of magnetic resonance spectroscopic imaging (MRSI). To overcome these difficulties, an online-optimized acquisition of k-space, termed sequential forward array selection (SFAS), was developed to reduce acquisition time without sacrificing spatial resolution. A 2D proton MRSI region ...

PURPOSE.: The purpose of this study was to demonstrate the usefulness of coronal oblique multiplanar reconstruction computed tomography (MPR CT) reformation parallel to the basal turn of the cochlea in the evaluation of the retrotympanum and hypotympanum to complete the standard CT examination of the temporal bone obtained with axial ...

PURPOSE: To retrospectively assess the sensitivity and specificity of three-dimensional (3D) 16-section computed tomography (CT) in the evaluation of vessels, pelvicalyceal system, and ureters in living renal donors, with surgical findings as the reference standard. MATERIALS AND METHODS: This was a HIPAA-compliant study. Institutional review board approval was obtained for ...

Strut chordae transection (SCT) has been recommended as a surgical treatment for mitral regurgitation (MR) arising from ischemic heart disease. However, little is known about the contribution of anterior strut chordae to leaflet tissue mechanics. In this study, experimental measurements of mitral valve deformation under quasi-static pressure loading were performed ...

BACKGROUND: Postintubation stenosis remains the most frequent indication for tracheal surgery. Rigid bronchoscopy has traditionally been considered the technique of choice for the preoperative diagnostic assessment. However, this technique is not routinely available, and new techniques such as flexible videobronchoscopy and spiral computed tomography (CT) scan with multiplanar reconstructions have ...

There is a wide range of diseases and normal physiological processes that are associated with alterations of the vascular system in organs. Ex vivo imaging of large vascular networks became feasible with recent developments in microcomputed tomography (microCT). Current methods permit to visualize only limited numbers of physically excised regions ...

With the development of multidetector computed tomography and the improvement in the capabilities of workstations, the use of high-quality three-dimensional reconstructions and virtual images can be applied to organs other than the colon such as the stomach. As a noninvasive technique, virtual gastroscopy represents an alternative to conventional endoscopy for ...

BACKGROUND & AIMS: Effective colonoscopic screening for polyps, whether by optical or virtual means, requires adequate visualization of the entire colonic surface. The purpose of this study was to assess prospectively the degree of surface coverage at 3-dimensional (3D) endoluminal computed tomography colonography (CTC) after retrograde fly-through, combined retrograde-antegrade fly-through, ...

OBJECTIVE: The aim of this study was to evaluate the applicability of 3-dimensional computed tomography (3D CT) imaging for the diagnosis of anterior talofibular ligament (ATFL) injury. METHODS: Six patients with lateral instability of ankle joint were examined with 3D CT preoperatively. Three patients had chronic ATFL tear, and the ...