As engineered nanomaterials (NMs) become used in industry and commerce their loading to sewage will increase. In this research, sequencing batch reactors (SBRs) were operated with hydraulic (HRT) and sludge (SRT) retention times representative of full-scale biological WWTPs for several weeks. Under environmentally relevant NM loadings and biomass concentrations, NMs ...

A Whispering Gallery Mode (WGM) biosensor was constructed to measure the adsorption of protein onto alkysilane self-assembled monolayers (SAMs) at solution concentrations unattainable with other techniques. The high sensitivity was provided by a WGM resonance excited in a silica microsphere that was functionalized with alkylsilane SAMs and integrated in a ...

Surface activation of fabric made from cellulose fibres, such as viscose, lyocell, modal fibres and cotton, can be achieved by printing of a concentrated NaOH-containing paste. From the concentration of reducing sugars formed in solution, an increase in intensity of the cellulase hydrolysis by a factor of six to eight ...

The potential for restoration of peatlands to deliver benefits beyond habitat restoration is poorly understood. There may be impacts on discharge water quality, peat erosion, flow rates and flood risk, and nutrient fluxes. This study aimed to assess the impact of drain blocking, as a form of peatland restoration, on ...

Silver nanoparticles utilising the surface plasmon resonance effect of silver, have been used to colour merino wool fibres as well imparting antimicrobial and antistatic properties to them to produce a novel silver nanoparticle - wool composite material. This is accomplished by the reduction of silver ions in solution by trisodium ...

The effectiveness of a kiwi fruit based solution for improving the tenderness of beef m. semimembranosus and the effect on colour stability was studied. Three treatments were applied; (1) injection with the solution, (2) injection with water and (3) no injection. All samples were packaged using a SmartShape™ prototype and ...

Films and monoliths containing the spin crossover complex [Fe(Htrz)(2)(trz)](BF(4)) (trz = 1,2,4-triazole) as nanoparticles have been obtained. The dispersion and consecutive inclusion of the Fe complex in a silica matrix prepared from tetramethoxysilane or tetraethoxysilane afford monoliths or films with a violet colour at room temperature, which turns white above ...

Artificial hydrophobic surfaces have a great potential in a wide range of industrial applications owing to their self-cleaning, anti-fogging and anti-biofouling properties. A family of polyfluorinated reactive azo dyes has been prepared and some of them easily modified and grafted on cotton fabric and glass surfaces obtaining new coloured hydrophobic ...

This study used phospholipids from fresh egg yolks to prepare liposome-encapsulated semi-permanent hair dyes in different pH buffer solutions and evaluated the functions and colour fastness to washing of the dyes. The extraction ratio of egg yolk phospholipids was 5%, and the purity was 91.8%. Empty liposome solutions were then ...

Monte Carlo simulations with an explicit description of counterions are performed to investigate the adsorption of ionic surfactants at the interface between water and soft hydrophobic and penetrable particles. The surfactant molecules are represented at a coarse-grained level, their hydrophobic tails interact with each other through a Lennard-Jones potential, whereas ...

Enzymatic polymer functionalisation has entered its most fascinating period with development in this field largely at the basic research level and pilot scale applications. Development of enzymatic processes for the development of lignocellulose-based functional polymers has not been spared, ranging from textile fibres with novel properties (antimicrobials properties, hydrophobic properties, ...

The sublimation of copper phthalocyanine (CuPc) at a temperature of 400°C under conditions of reduced pressure is shown to be an effective method of developing latent fingermarks on certain types of surface. Preliminary experiments on a limited selection of surfaces including paper, plastic and ceramic tiles were carried out using ...

1. The combined effect of sage (S), sodium erythorbate (SE), a mixture of sage and sodium erythorbate (MIX) and vacuum packaging (VP) and modified atmosphere packaging (MAP) on the quality of cooked turkey meatballs stored at 4°C was investigated. The physicochemical properties (colour, MDA, AV, pH, water activity), microbiological quality ...

The aim of this study was to examine the effect of ozonated gel, carbamide peroxide bleaching agent and polishing paste on the colour and surface topography of stained resin composite. Ninety disc-shaped resin composite specimens were used in this study. They were randomly divided into three groups of 30 specimens ...

Fluoride and acetate-responsive polymer gels were prepared by incorporation of p-nitrophenylthiourea into poly(octadecyl acrylate) gels, and the colours and volumes were changed selectively in the presence of these ions by complexation in THF.

We report on the extensive characterization of single-walled carbon nanotubes (SWCNTs) dispersed in a variety of surfactants, such as sodium dodecyl benzene sulfonate (SDBS), sodium cholate (SC), and three synthesized perylene-based surfactants, by using differential sedimentation in H(2)O and D(2)O. Multidimensional evaluation of the absorption profiles over radius, wavelength, and ...

Advancing contact angle (θ) measurements were carried out for aqueous solutions of four cationic surfactants, hexadecanol glycidyl ether ammonium chloride (C(16)PC), guerbet alcohol hexadecyl glycidyl ether ammonium chloride (C(16)GPC), hexadecanol polyoxyethylene(3) glycidyl ether ammonium chloride (C(16)(EO)(3)PC), and guerbet alcohol hexadecyl polyoxyethylene(3) glycidyl ether ammonium chloride (C(16)G(EO)(3)PC), on the quartz surface ...

Recent data suggest that a functional cooperation between surfactant proteins SP-B and SP-C may be required to sustain a proper compression-expansion dynamics in the presence of physiological proportions of cholesterol. SP-C is a dually palmitoylated polypeptide of 4.2 kDa, but the role of acylation in SP-C activity is not completely understood. ...

The hydrophobic proteins SP-B and SP-C are essential for pulmonary surfactant function, even though they are a relatively minor component (<2% of surfactant dry mass). Despite countless studies, their specific differential action and their possible concerted role to optimize the surface properties of surfactant films have not been completely elucidated. ...

doi: 10.1111/j.1741-2358.2010.00438.x Evaluation of experimental cleanser solution of Ricinus communis: effect on soft denture liner properties Objective:  This study evaluated colour stability, hardness and roughness of soft denture liners after immersion in various cleansers. Materials and methods:  Thirty specimens (14 mm × 4 mm) of Elite Soft Relining (ES) and Mucopren Soft (MS) were ...

How does one design a surfactant mixture using a set of available surfactants such that it exhibits a desired adsorption kinetics behavior? The traditional approach used to address this design problem involves conducting trial-and-error experiments with specific surfactant mixtures. This approach is typically time-consuming and resource-intensive and becomes increasingly challenging ...

The coagel and gel phases formed by the d and l diastereoisomers of ascorbyl-dodecanoate (ASC12) in deuterated water were studied through solid-state NMR techniques. In particular, the dynamic properties of water and surfactant chains were investigated by (2)H and (13)C NMR static spectra, respectively. Two fractions of water with very ...

The mixed system of a nonionic hydrocarbon surfactant, polyoxyethylene (23) lauryl ether (Brij-35), and a perfluorinated surfactant, perfluorononanoic acid, was investigated by a combination of methods. The critical micelle concentrations (cmc's) have been determined over a wide range of sample compositions by fluorescence and UV-visible spectrophotometry using pyrene and N-(4-nitrophenyl) ...

To investigate the coupled effects of solution chemistry and hydrodynamics on the mobility of quantum dot (QD) nanoparticles in the vadose zone, laboratory scale transport experiments involving single and/or sequential infiltrations of QDs in unsaturated and saturated porous media, and computations of total interaction and capillary potential energies were performed. ...

The profile of enzymatic saccharification of Avicel in the presence and absence of lignin has been described with a fractal kinetic model (Wang and Feng, 2010), in which the retarded hydrolysis rate of enzymatic saccharification of cellulose has been represented with a fractal exponent. The lignin inhibition in the enzymatic ...

The use of small angle neutron scattering, SANS, neutron reflectivity, NR, and surface tension to study the mixing properties of the biosurfactant rhamnolipid with a conventional anionic surfactant, sodium dodecyl 6-benzene sulfonate, LAS, is reported. The monorhamnose rhamnolipid, R1, mixes close to ideally with LAS at the air-water interface, whereas ...

Surfactant-induced wetting of hydrophobic nanopores is investigated. SDS micelles interact with the C18 layer on the nanopore walls with their hydrophobic tails, creating a charged wall lining with their head groups and inducing a breakthrough of the aqueous solution to wet the pores. The surface coverage of the surfactant molecules ...

In a microemulsion system based on a mixture of nonionic and ionic surfactants the addition of alcohol instead of changing the temperature was used to tune the curvature of the surfactant interface. The influence of the addition of the short-chain alcohol 2-propanol in the system water-perchloroethylene- Marlowet IHF-2-propanol is studied ...

A method is reported here to tune the ionic current rectification behavior through a conical nanopore fabricated with the track-etching technique. In order to change the surface charge property of the pore wall, we added the cationic surfactant hexadecyl trimethylammonium bromide (CTAB) into the working electrolyte of 0.1 M KCl. ...

Solutions of mixed surfactants are often considered as solvent mixtures. Usually, mixed micellar aggregates are considered as a homogeneous mixture of solvents dispersed in a solution. But the transposition of the usual thermodynamic models of solvent mixtures to mixed micelles is not always so obvious. We discussed this point in ...

The interaction of surfactants dodecyltrimethylammonium bromide (DTAB), cetyltrimethylammonium bromide (CTAB), and p-tert-octylphenoxypolyoxyethylene (9.5) ether (TX-100) with guar (Gr), carboxymethylhydroxypropyl guar (CMHPG), diutan (Dn), and xanthan (Xn) gums has been studied employing conductometry, tensiometry, microcalorimetry, viscometry, and atomic force microscopy (AFM) techniques. Both weak and strong interactions were observed. CTAB interacted ...

The adsorption of nonionic surfactants to the silica-water and cellulose-water interfaces was studied using optical reflectometry (OR) and soft-contact atomic force microscopy imaging. The polyethylene oxide alkyl ethers C(14)E(6) and C(16)E(8) were shown to readily adsorb to both interfaces. The kinetics of the adsorption process as well as the equilibrium ...

macadamia integrifolia, Macadamia tetraphylla and their hybrids are cultivated for their edible kernels. After harvest, nuts-in-shell are partially dried on-farm and sorted to eliminate poor-quality kernels before consignment to a processor. During these operations, kernel quality may be lost. In this study, macadamia nuts-in-shell were sampled at five points of ...

We report on the detection of micellar growth in anionic, cationic, and catanionic surfactant systems using a novel surfactant type fluorescence probe, sodium 12-(N-dansyl)amino-dodecanate (12-DAN-ADA). The fluorescent group was incorporated in the tail of the surfactant which tethers the fluorescent group deep inside the apolar micellar cores. The fluorescence anisotropy ...

One-step surfactant-free, water-droplet templating has been developed as a fabrication method for a poly(lactide-co-glycolide) (PLGA) film that can be used as a model to investigate the relationship between solvent, monomer ratio, polymer concentration and humidity on its structure. The resulting material is a honeycomb-structured film. Formation of this structure was ...

In the present work, we focus on the bulk rheology of mixtures consisting of surfactant modified silica nanoparticles in water. Depending on the ratio of surfactant and nanoparticle concentrations, significant modifications in the measured rheology are evidenced. A domain where the dispersions behave like viscoelastic media is observed. Outside this ...

The assessment of adsorbed surfactant mass by quartz crystal microbalance with dissipation (QCM-D) monitoring is often complicated due to large bulk responses, particularly for surfactants with high critical micelle concentration (CMC). We present in this work means to interpret QCM-D data that enables the response from the bulk contribution to ...

A colorimetric strategy based on conjugated polyelectrolyte aggregates has been applied to determine and distinguish anionic, cationic and non-ionic surfactants.

The aim of this work was to study intermolecular interactions in systems containing charged polyion (polyacrylate, PA(-)), charged surfactant (C(16)TA(+)) and nonionic surfactant (C(12)E(5) or C(12)E(8)). To achieve this we have created four different phase diagrams using two different so-called complex salts, C(16)TAPA(25) and C(16)TAPA(6000), both consisting of positively charged ...

The formation of microemulsions with triglycerides at ambient conditions can be improved by increasing the surfactant-water and surfactant-oil interactions. Therefore, extended surfactants were developed, which contain hydrophilic/lipophilic linkers. They have the ability to stretch further into the oil and water phase and enhance the solubility of oil in water. In ...

After contact with water, surfactant lamellar phases (L(α)) can show spectacular interface instabilities: multibilayer tubules, so-called myelins, grow from the L(α)/water interface into the water. We have studied the shape, size, and growth of myelins in aqueous solutions of the nonionic surfactant C(12)E(3) (triethylene glycol monododecyl ether) during dissolution. We ...

High-quality films of bismuth antimony telluride were synthesized by electrodeposition from nitric acid electroplating baths. The influence of a surfactant, sodium ligninsulfonate, on the structure, morphology, stoichiometry, and homogeneity of the deposited films has been investigated. It was found that addition of this particular surfactant significantly improved the microstructural properties ...

Specific ion effects are ubiquitous in biological and colloidal systems. The addition of electrolytes to ionic surfactant solutions has pronounced effects on micellar properties, such as critical micelle concentration (cmc), micellar size, and shape. Ions play an important role in colloid stability and aggregation behavior of ionic surfactant solutions. Despite ...

The impact of multivalent counterions, Al(3+), on the surface adsorption and self-assembly of the anionic surfactant sodium dodecyl dioxyethylene sulfate, SLES, and the anionic/nonionic surfactant mixtures of SLES and monododecyl dodecaethylene glycol, C(12)E(12), has been investigated using neutron reflectivity, NR, and small angle neutron scattering, SANS. The addition of relatively ...

We study the Brownian motion of probe particles embedded in a wormlike micellar fluid made of a zwitterionic surfactant N-tetradecyl-N,N-dimethyl-3-ammonio-1-propanesulfonate (TDPS), sodium dodecyl sulfate (SDS), and salty water to get structural and dynamical information of the micellar network. The motion of the probe particles was tracked with diffusing wave spectroscopy, ...

The adsorption of the monomeric/gemini surfactant mixtures at the silica/aqueous solution interface has been characterized on the basis of quartz crystal microbalance with dissipation monitoring (QCM-D) and atomic force microscopy (AFM) data. The gemini surfactant employed in this study was cationic 1,2-bis(dodecyldimethylammonio)ethane dibromide (12-2-12). This surfactant was mixed with monomeric ...

In the present study, the reaction conditions required for the partial oxidation of a commercial nonionic textile surfactant, an alkyl polyethoxylate, with the H(2)O(2)/UV-C treatment process were optimized using central composite design and response surface methodology (CCD-RSM). CCD-RSM allowed for the development of empirical quadratic equations that satisfactorily predicted COD ...

Partition coefficients for a pH-degradable 1,3-dioxolane alkyl ethoxylate surfactant, 4-CH(3)O (CH(2)CH(2)O)(5.6)-CH(2), 2,2-(CH(2))(12)CH(3), 2-(CH(2)) CH(3), 1,3-dioxolane or "cyclic ketal" surfactant, CK-2,13-E(5.6,ave), between isooctane- and water-rich phases of 2- and 3-phase microemulsion systems (K(n)) were determined as functions of the ethoxylate size, n, and temperature for the neat surfactant and its binary ...

It is of great significance to develop an appropriate water-in-ionic liquid (W/IL) microemulsion suitable for the expression of the catalytic activity of a given enzyme. In this paper, the phase diagram of a new AOT/Triton X-100/H(2)O/[Bmim][PF(6)] pseudo ternary system is presented. With the aid of nonionic surfactant Triton X-100, AOT ...

Unfolding of rabbit serum albumin (RSA) by cationic surfactants cetyltrimethylammonium bromide (CTAB) and tetradecyltrimethylammonium bromide (TTAB) was studied by exploiting surface tensiometry, small-angle neutron scattering (SANS), intrinsic fluorescence, resonance Rayleigh scattering (RRS) (also referred as turbidity at 350/350), and circular dichroism (CD) techniques. Surface tension measurements revealed the formation of ...