The Cemitério Paleolake, Catalão, Goiás, is a lacustrine deposit that is rich in spicules of continental sponges. These spicules, which are present in three sections (1-3), were analyzed for the taxonomic identification of the species in order to reconstruct the late Quaternary palaeoenvironment. An indigenous assemblage of lentic sponges was ...

The present investigation was aimed at developing and optimizing a simple aqueous tablet-coating formulation and its process. 5-Fluorouracil (5-FU) was used to ascertain the relative lipophilic/hydrophilic behavior of the coating system. Optimization was performed by evaluating the adhesive force strength and cohesive force strength of the tablet coat using a ...

In this work we present a method for the deposition of periodically ordered, c-axis aligned ZnO nanorod arrays. By using chemical bath deposited films in conjunction with silica templating through nanosphere monolayers, masks suitable for high temperature deposition are created. A vapour phase transport technique is then used to deposit ...

A new method is presented for functionalizing electrospun nanofibers with GAGs and growth factors by PEM deposition. Electrospun chitosan nanofibers, spun from trifluoroacetic acid and dichloromethane, were coated with PEMs, using the polysaccharides heparin and N,N,N-trimethyl chitosan. FGF-2 was adsorbed on the PEM-coated nanofibers. Nanofiber neutralization, PEM construction, and FGF-2 ...

The different molar ratios of collagen/chitosan were used to be immobilized on polypropylene nonwoven fabrics grafted with N-isopropyl acrylamide (abbr. PP-g-NIPAAm-i-Col/Chi). For a controlled immobilizing time and NIPAAm concentration, the collagen/chitosan immobilized values and the antibacterial properties of PP-g-NIPAAm-i-Col/Chi increased with increasing amount of chitosan in the mixture of collagen/chitosan. ...

Naturally derived polymers possess a number of properties beneficial to wound healing and tissue engineering. The polysaccharides chitin and chitosan appear to be suitable candidates for the preparation of dressing materials and scaffolds for tissue regeneration due to their unique structural, physico-chemical and functional properties. Functionalization of these biopolymers for ...

This study evaluated the potential for disposable filtering facepiece respirators (hereafter termed masks) contaminated with 1-μ m particles to release particles as a result of lateral tension applied to the mask. The lateral tension was designed to simulate the removal of a contaminated mask from a user's head. Four brands ...

This article describes a simple microfluidic method to fabricate chitosan-silica hybrid microspheres in one step. We dissolved tetraethoxysilane (TEOS) into a chitosan/acetic acid aqueous solution to form a chitosan-silica sol, and then emulsified it in an organic phase mainly containing n-octanol and an organic base triotylamine (TOA) via a co-axial ...

MPEG was modified with 1,1'-carbonyldiimidazole, then the activated MPEG reacted with primary amino groups of chitosan. Synthesize the graft copolymer of chitosan and polyethylene glycol in two steps. The structure of the copolymer was characterized by FT-IR and 1H-NMR. It agrees with the PEG content of classical stealth nanoparticles materials. ...

Liesegang rings, periodical bands or ring patterns formed by inorganic precipitation in polymer gel medium, have attracted lots of interest of researchers aiming to construct ordered structures. Inspired by the Liesegang ring phenomena, chitosan, instead of inorganic species, was used as building block to construct a chitosan hydrogel with concentric ...

Chitosan-glucose conjugates were prepared using Maillard reaction chemistry. Water-soluble and acid-soluble chitosan-glucose mixtures were heated at pH 4.9 and 6.0 at 98 °C. Mixtures at pH 6.0 containing acid-soluble chitosan gelled when heating was continued after reaching 98 °C and withstood gelation for only 30 min at pH 4.9. In ...

Bupivacaine (BVC; S75–R25, NovaBupi® is an amide-type local anesthetic. Sodium alginate is a water-soluble linear polysaccharide. The present study reports the development of alginate/bis(2-ethylhexyl) sulfosuccinate (AOT) and alginate/chitosan nanoparticle formulations containing BVC (0.5%). The amounts of BVC associated in the alginate/AOT and alginate/chitosan nanoparticles were 87 ± 1.5 and 76 ...

Polymeric composites made up of nano-hydroxyapatite (n-HAp) with chitin and chitosan have been prepared and studied for the removal of Cu(II) ions from the aqueous solution. The sorption capacity (SC) of n-HAp, n-HAp/chitin (n-HApC) composite and n-HAp/chitosan (n-HApCs) composite were found to be 4.7, 5.4 and 6.2mg/g respectively with a ...

The main objectives of the research were to compare the components of partially N-deacetylated chitins prepared identically from native chitin and a chitin regenerated from a heavily deacetylated chitosan. Additionally, to determine if any of the water-soluble components would serve as substrates in a study of a Chitinase isolated from ...

Chitosan is a promising biomaterial for biomedical applications and is currently applied as wound dressings. While chitosan solutions demonstrate strong bactericidal activity against a range of medically important bacteria, the study here reports a loss of this beneficial property in thin films cast from the same solutions. Chitosan films (20 ...

Atomic force microscopy (AFM) and AFM-based force spectroscopy was used to study the desorption of individual chitosan polymer chains from substrates with varying chemical composition. AFM images of chitosan adsorbed onto a flat mica substrate show elongated single strands or aggregated bundles. The aggregated state of the polymer is consistent ...

In recent years, chitosan nanocapsules have shown promising results as carriers for oral drug or peptide delivery. The success in their applicability strongly depends on the stability of these colloidal systems passing through the digestive tract. In gastric fluids, clear stability comes from the high surface charge density of the ...

Homogeneous aqueous suspensions of graphene have been prepared by chemical reduction of graphene oxide in the presence of chitosan. The graphene sheets in thus prepared suspensions can be switched reversibly between a well dispersed and a more aggregated state with pH as a stimulus.

Mass production of nanoparticles using a reliable cost-effective approach is a challenge in the pharmaceutical industry. In this study, the spinning disc processing (SDP) technology was used to fabricate chitosan nanoparticles, with a view to commercially produce chitosan nanoparticle-based drug delivery platforms. Chitosan solution (0.25%, w/v, in dilute acid, 27.5 ...

Physical chitosan hydrogels are potential biomaterials for several biomedical applications, such as wound healing, tissue repair, and drug delivery. Controlling the microstructural organization of chitosan gels is one of the keys for monitoring the physical, mechanical, and biological properties. As a result, the main objective of the present work was ...

Chitosan is a naturally derived polymer with applications in a variety of industrial and biomedical fields. Recently, it has emerged as a promising material for biological functionalization of microelectromechanical systems (bioMEMS). Due to its unique chemical properties and film forming ability, chitosan serves as a matrix for the assembly of ...

A commercial laccase from Trametes versicolor was conjugated with biopolymer chitosan using 1-ethyl-3-(3-dimethylaminopropyl) carbodiimide hydrochloride (EDC) as the cross-linking agent. Laccase-chitosan conjugation strategies were tested using different molar ratios of glucosamine monomer/protein with different molar excess ratios of EDC relative to laccase. Immobilization techniques were developed to improve the stability ...

A superabsorbent polymer (SAP) from chitosan was provided via carboxymethylation of chitosan, followed by cross-linking with glutaraldehyde and freeze-drying. This work was focused on an investigation of the effects of monochloroacetic acid (MCAA), sodium hydroxide, and reaction time on preparation of carboxymethyl chitosan (CMCS). The CMCS products were characterized using ...

We describe herein successful preparations of monodisperse chitosan microcapsules with hollow structures using the SPG membrane emulsification technique. Two preparation procedures were examined in this study. In the first method, monodisperse calcium alginate microspheres were prepared and then coated with unmodified chitosan. Subsequently, tripolyphosphate treatment was conducted to physically cross-link ...

Electrospun natural biopolymers are of great interest in the field of regenerative medicine due to their unique structure, biocompatibility, and potential to support controlled release of bioactive agents and/or the growth of cells near a site of interest. The ability to electrospin chitosan and alginate to form polyionic complexed nanofibrous ...

The interaction of PLGA-chitosan Nanoplexes with ocular mucosa was investigated ex vivo and in vivo to assess their potential as ocular delivery system. Fluorescent Rhodamine Nanoplexes (Rd-Nanoplexes) were prepared by ionotropic gelation method. The size and morphology of Nanoplexes was investigated by TEM, SEM and PCS. The corneal retention, uptake ...

The efficient procedure to prepare novel water-soluble chitosan derivative was established by Michael addition reaction to introduce sodium allylsulfonate into the chitosan at mild condition. The chemical structure of the chitosan derivative was characterized by FT-IR, (1)H NMR and Elemental analysis. The degree of substitution (DS) was calculated by Elemental ...

Few-layered graphene sheets, synthesized by direct current arc-discharge method using NH(3) as one of the buffer gases, were dispersed in chitosan/acetic acid solutions. FTIR and X-ray photoelectron spectroscopy showed the presence of oxygen-containing functional groups on the surface of graphene sheets that may assist the good dispersion of graphene in ...

Zwitterionic chitosan, a chitosan derivative with a unique pH-dependent charge profile, was employed to create a stealth coating on the cationic surface of drug carriers. Zwitterionic chitosans were synthesized by amidation of chitosan with succinic anhydride. The succinic anhydride-conjugated chitosan had an isoelectric point, which could be easily tuned from ...

Biodegradable chitosan hollow nanospheres were fabricated by employing uniform poly-D,L-lactide-poly(ethylene glycol) (PELA) nanoparticles as templates. Chitosan was adsorbed onto the surface of PELA nanoparticle templates through the electrostatic interaction between the sulphuric acid groups from sodium dodecyl sulfate (SDS) on the templates and the amino groups of the chitosan. Subsequently, ...

Chitosan nanoparticles (CS-NPs) were prepared by ionic gelation method using carboxymethyl chitosan and chitosan hydrochloride as carriers of tea polyphenols. The characteristics of chitosan-coated tea polyphenols nanoparticles (CS-TP NPs) were determined by using transmission electron microscopy (TEM) and FT-IR spectroscopy. It was found that the synthesized CS-TP NPs were non-spherical ...

A new approach to the synthesis of highly stable aqueous colloids of coordination polymer nanoparticles was developed by using water-soluble chitosan beads as template and as stabilizing agent. The method consists in the synthesis of nanocomposite beads containing cyano-bridged coordination polymer nanoparticles via step-by-step coordination of the metal ions and ...

To enhance permeation and solubility of an intranasal delivery system of fexofenadine hydrochloride (FXD HCl), a new formulation using poloxamer 407 (P407)/hydroxypropyl-β-cyclodextrin (HP-β-CD)-based thermoreversible gels with chitosan, was developed. Prepared gels were characterized by gelation temperature, viscosity, viscoelasticity, and drug release profile. The in vitro permeation study was performed in ...

Present work investigates the potential of chitosan nanoparticles, formulated by the ionic gelation with tripolyphosphate (TPP), to open the cellular tight junctions and in doing so, improve the permeability of model macromolecules. A comparison is made with chitosan solution at equivalent concentrations. Initial work assessed cytotoxicity (through MTS and LDH ...

Surface-enhanced Raman scattering (SERS) has been intensely researched for many years as a potential technique for highly sensitive detection. This work, through the reduction of HAuCl(4) with pyrrole in aqueous solutions, investigated a facile one-pot synthesis of flower-like Au nanoparticles with rough surfaces. The formation process of the Au nanoflowers ...

The effect of chitosan as internal or external coating on the mesalamine (5-ASA) release from calcium alginate microparticles (CaAl) was studied, and a delayed release of 5-ASA system intended for colonic drug delivery was developed. The external chitosan coating was developed by immersion of wetted CaAl in chitosan solution and ...

Fixed-bed column studies were carried out to investigate the dynamic sorption of Reactive Black 5 (RB5) onto chitosan. The effect of operating parameters such as initial dye concentration, superficial flow velocity, bed height and particle size on the sorption of RB5 onto chitosan was studied. Column regeneration, dye recovery and ...

The design and construction of delivery vectors with high stability and effective cellular uptake efficiency is very important. In this study, a novel polymeric liposomes (PLs) formed from PEGlated octadecyl-quaternized lysine modified chitosan (OQLCS) and cholesterol with higher size stability and cellular uptake efficiency has been synthesized successfully. Compared to ...

Aerogel microspheres of chitosan, an abundant biopolymer obtained from marine crustaceans, have been successfully applied to catalyze the asymmetric aldol reaction in water, providing the products in high yields and with good stereoselectivity (up to 93% ee) and recyclability (up to 4 runs). Yields were favourably affected by additives such ...

In this study, the possibility of producing stable O/W emulsions incorporating beta-carotene in oil droplets surrounded by multiple-layer interfacial membranes has been demonstrated. Emulsions were prepared using a two-stage process by homogenization, which relied on the adsorption of chitosan to anionic droplets coated with soybean soluble polysaccharides (SSPS). Results showed ...

A novel four-step method is presented to synthesize partially thiolated trimethylated chitosan (TMC) with a tailorable degree of quaternization and thiolation. First, chitosan was partially N-carboxylated with glyoxylic acid and sodium borohydride. Next, the remaining amines were quantitatively dimethylated with formaldehyde and sodium borohydride and then quaternized with iodomethane in ...

This review paper brings an overview of the use of chitosans in nanostructured films produced with the Langmuir-Blodgett (LB) or the electrostatic layer-by-layer (LbL) techniques, with emphasis on their possible applications. From a survey in the literature one may identify three main types of study with chitosan in nanostructured films. ...

Melt blends of chitosan and biodegradable aliphatic polyester have been physically and biologically studied, presenting great potential for biomedical applications. Structurally, poly(butylene succinate)-chitosan (PBS/Cht) composite scaffolds are covered by a thin PBS layer, preventing the desired interaction of cells/tissues with the chitosan particules. In the present work, a selective and ...

Chitosan (deacetylation=75-85%) and sodium tripolyphosphate (TPP) solutions were observed to undergo spontaneous coacervation transition or nanoparticle formation depending on the chitosan concentration and the volumetric mixing ratio [chitosan/TPP]. Three distinct conditions have been identified: (i) [chitosan]<or=0.5mg/ml, 0.5<or=[chitosan/TPP]<or=2 and pH<5.5, yields spontaneous coacervation, (ii) 0.5<or=[chitosan]<or=2.5mg/ml, [chitosan/TPP]>or=2 and 3.5<pH<5.5, produces chitosan nanoparticles ...

Solid micro- and nanoparticles were prepared from chitosan/acetic acid solution in one-step by the electrospray procedure. The effects of various solution properties and processing parameters on particle formation were investigated. Solution viscosity and conductivity were the most important factors affecting electrospray behavior, i.e., stable electrospray was achieved only when viscosity ...

The anticandidal activity of four fungal chitosan types, produced from Mucor rouxii DSM-1191, against three Candida albicans strains was determined. The most bioactive chitosan type, to inhibit C. albicans growth, had the lowest molecular weight (32 kDa) and the highest deacetylation degree (94%). Water soluble types had stronger anticandidal activity ...

The aim of this study is to investigate cross-linked gelatin-chitosan nanofibers produced by means of electrospinning. Gelatin and chitosan nanofibers were electrospun and then cross-linked by glutaraldehyde (GTA) vapor at room temperature. Scanning electron microscopy (SEM) images showed that the cross-linked mats could keep their nanofibrous structure after being soaked ...

The aim of this study was to produce and characterise amphotericin B (AmB) containing chitosan-coated liposomes, and to determine their delivery from an air-jet nebuliser. Soya phosphatidylcholine : AmB (100 : 1) multilamellar vesicles were generated by dispersing ethanol-based proliposomes with 0.9% sodium chloride or different concentrations of chitosan chloride. ...

Tissue engineering scaffolds produced by electrospinning feature a structural similarity to the natural extracellular matrix. Polymer blending is one of the effective methods to provide new and desirable biocomposites for tissue engineering applications. In this study chitosan was blended with gelatin and the effect of processing parameters of electrospinning and ...

The dissolution behavior and absorption of flurbiprofen (FP) following oral administration from:three types of chitosans (LM chitosans), with different molecular weights and degree of acetylation, have been studied in comparison with those of the drug alone. The solubility of FP increased with concentrations of LM chitosan, especially in the case ...