SUMMARYFor Isospora (Protozoa: Eimeriidae) parasites of passerine birds, diurnal periodicity of oocyst output is a well-described phenomenon. From the temporal zone to the tropics, oocyst production is correlated with the light-dark cycle, peaking in the afternoon hours. However, nothing is known about the existence of diurnal periodicity of these parasites ...

In this Letter, we report the improved light outcoupling efficiency of conventional white organic light-emitting devices (OLEDs) by a kind of multifunctional film with both antireflective and superhydrophobic ability. This film consisted of regular polydimethylsiloxane (PDMS) nanopillar arrays, which were readily batch produced by low-cost imprint lithography. The nanopillar arrays ...

A two-dimensional (2-D) "heart-cutting" HPLC system was used to fractionate oligostyrenes into the respective diastereoisomers. For samples of known composition, the response of an ultraviolet (UV) absorbance detector followed the anticipated pattern. The response of an evaporative light-scattering (ELSD) detector on the other hand indicated quite different concentrations for the ...

We described a new structure photodetector, which is constructed by p-n heterojunction nanowire arrays of PANI (polyaniline)/CdS. The nanowire arrays exhibit excellent rectifying features and a diode nature and show a sensitive spectral response to blue light under 420 nm. The rectification ratio plots of different illumination intensities show straight ...

This Spotlight on Applications provides an overview of a research program that has focused on the development and mechanistic study of cationic conjugated polyelectrolytes (CPEs) that function as light- and dark-active biocidal agents. Investigation has centered on poly-(phenylene ethynylene) (PPE) type conjugated polymers that are functionalized with cationic quaternary ammonium ...

As cone photoreceptors mediate vision in bright light, their photopigments are bleached at a rapid rate and require substantial recycling of the chromophore 11-cis-retinal (RAL) for continued function. The retinal pigment epithelium (RPE) supplies 11-cis-RAL to both rod and cone photoreceptors; however, stringent demands imposed by the function of cones ...

Spiropyran dye-modified multi-walled carbon nanotubes have been synthesized and used to regulate horseradish peroxidase activity by light irradiation. This design has been developed for a label-free colorimetric assay of lysozyme with a direct detection limit of 30 nM.

We present the results of a search for a very light CP-odd Higgs boson a_{1}^{0} originating from top quark decays t→H^{±}b→W^{±^{(*)}}a_{1}^{0}b, and subsequently decaying into τ^{+}τ^{-}. Using a data sample corresponding to an integrated luminosity of 2.7  fb^{-1} collected by the CDF II detector in pp[over ¯] collisions at 1.96 TeV, we ...

Every biological or artificial visual system faces the problem that images are highly ambiguous, in the sense that every image depicts an infinite number of possible 3D arrangements of shapes, surface colors, and light sources. When estimating 3D shape from shading, the human visual system partly resolves this ambiguity by ...

A quantitative theoretical analysis of the quadrant photodetector (QPD) sensitivity in position measurement is presented. The Gaussian light spot irradiance distribution on the QPD surface was assumed to meet most of the real-life applications of this sensor. As the result of the mathematical treatment of the problem, we obtained, in ...

Light pollution is one of the most rapidly increasing types of environmental degradation. Its levels have been growing exponentially over the natural nocturnal lighting levels provided by starlight and moonlight. To limit this pollution several effective practices have been defined: the use of shielding on lighting fixture to prevent direct ...

The electronic modification of TiO(2) with highly dispersed NiO particles smaller than ca. 2 nm by the chemisorption-calcination-cycle technique has given rise to a high level of visible-light-activity exceeding that of iron oxide-surface modified TiO(2) simultaneously with the UV-light-activity being significantly increased.

Seagrasses of the Great Barrier Reef predominantly occur in coastal regions where terrestrial inputs modify water quality and photosynthetic light is highly variable. Responses to shading were tested for Cymodocea serrulata, Halodule uninervis, Thalassia hemprichii and Zostera muelleri. In aquaria, four light treatments - high (66% surface light), moderate (31%), ...

An overview, together with some practical advice, is presented of the current status of the automation of macromolecular crystallography (MX) data collection, with a focus on MX beamlines at Diamond Light Source, UK.

Aims The aim of this work was to construct a lighting device that allows a uniform lighting of top illumination charts, as used for the examination of contrast vision and visual acuity. The relevant standards make strict demands for such charts with regard to the quality of the lighting, the ...

Producing higher efficiency cars with less and lighter materials but without compromising safety, comfort and driving pleasure might give a competitive advantage. In this light, at BMW a new light weight car-seat concept was developed based on the human body contour. A possibility to increase the comfort is using a ...

We describe a method to induce by light a reversible switch from a continuous two-phase laminar flow to a droplet generating regime, in microfluidic devices with a usual water-in-oil flow focusing geometry. It consists in adding a photosensitive surfactant to the aqueous phase to modulate using light the interfacial energy ...

We propose a scheme to improve the SNR distribution as well as the spectral efficiency of M-QAM OFDM signal for indoor visible light communication by tilting the receiver plane. Newton method is employed for the photo-detector to receive maximum power by finding the optimal tilting angle. This method is a ...

In this study, we proposed an effective optical design method to solve the problem of prescribed illuminance for LED chip array packaging (LCAP). With this method, light energy redistribution can be obtained by optimizing meshing parameters on the target. Not only can it deal with light controlling of extended source, ...

We report high-efficiency blue light-emitting diodes (LEDs) with air voids embedded in GaN. The air void structures were created by the lateral epitaxial overgrowth (LEO) of GaN using a tungsten mask. The optical output power was increased by 60% at an injection current of 20 mA compared with that of ...

We experimentally demonstrate a tunable slow-light device consisting of all-pass Si microrings. A compact device of 0.014 mm² footprint is fabricated by using CMOS-compatible process, and its center wavelength, bandwidth and delay are continuously tuned by integrated heaters. The tuning range is 300 ps at fixed wavelengths with a 1 ...

We report on orange a-plane light-emitting diodes (LEDs) with InGaN single quantum well (SQW) grown on r-plane sapphire substrates by metal organic chemical vapor deposition (MOCVD). The peak wavelength and the full-width at half maximum (FWHM) at a drive current of 20mA were 612.2 nm and 72 nm, respectively. The ...

The reorientation inversion of liquid crystal molecules in azo-dye-doped liquid crystal (ADDLC) films irradiated by biphotonic (green and red light) lasers is studied using the self-phase-modulation method. The results show that the induced change of refractive index (∆n) in an ADDLC cell illuminated with a fixed intensity of green light ...

In light-emitting diode (LED) applications, it is becoming a big issue that how to optimize light intensity distribution curve (LIDC) and design corresponding optical component to achieve uniform illumination when distance-height ratio (DHR) is given. A new reversing design method is proposed to solve this problem, including design and optimization ...

Solid-state lighting is currently based on light-emitting diodes (LEDs) and phosphors. Solid-state lighting based on lasers would offer significant advantages including high potential efficiencies at high current densities. Light emitted from lasers, however, has a much narrower spectral linewidth than light emitted from LEDs or phosphors. Therefore it is a ...

The fabrication process and design issues for the fabrication of vertical-injection GaN-based light-emitting diodes were investigated. The process yield was reduced according to the adhesion of reflective p-electrodes, the exposure of electroplated metal in plasma, and wet-etching induced surface textures. The chip design utilizing current blocking layer and branched n-electrode ...

Methods for simulating the color temperature, hue and brightness of daylight illumination for indoor lighting simply by adjusting the intensity of red, green, and blue light emitting diodes are proposed. We obtain uniform color mixing with a light box by adjusting the ratios between the intensities of red, green and ...

We report the development of new nanophosphor structures based on the Mn-doped ZnSeS material system to enhance the color properties, luminosity and efficiency of white LEDs. These structures have been demonstrated for phosphor-based white LED applications utilizing both blue and UV LED systems. Bandgap tuning for near UV (405 nm) ...

We report on ITO-free large-area organic light-emitting diodes (OLEDs) fabricated on glass substrates comprising α-NPD as a hole transport layer (HTL) and coevaporated CBP:Ir(ppy)₃ as the emission layer. Indium-tin-oxide (ITO) was replaced with a conductive polymer electrode and an electroplated thick metal grid was used to improve the homogeneity of ...

A 25-pixel illumination system composed of a 5 × 5 dielectric liquid-lens (DLL) zoom module array, 25 light-emission diodes (LEDs), and a secondary optical lens demonstrates 3D light field manipulation. LEDs function as 2D illumination pixels while the DLL module array performs longitudinal illuminance adjustability by zooming each illumination pixel. ...

LEDs on Si offer excellent potential of low cost manufacturing for solid state lighting and display, taking advantage of the well-developed IC technologies of silicon. In this paper, we report how the performance of LEDs grown on Si can be improved. Multiple quantum well InGaN LED structure was grown on ...

High efficiency white light-emitting diodes with superior color-mixing have been investigated. It is suggested that the patterned remote phosphor structure could improve the uniformity of angular-dependent correlated color temperature (CCT) and achieve high chromatic stability in wider operating current range, as compared to the conventional remote phosphor coating structure. In ...

The capability to focus electromagnetic energy at the nanoscale plays an important role in nanoscinece and nanotechnology. It allows enhancing light matter interactions at the nanoscale with applications related to nonlinear optics, light emission and light detection. It may also be used for enhancing resolution in microscopy, lithography and optical ...

Solid state lighting seeks to replace both, incandescent and fluorescent lighting by energy efficient light-emitting diodes (LEDs). Just like compact fluorescent tubes, current white LEDs employ costly rare earth-based phosphors, a drawback we propose to overcome with direct emitting LEDs of all colors. We show the benefits of homoepitaxial LEDs ...

OBJECTIVE: The aim of this study was to compare the polimerization ability of three different light-curing units (quartz tungsten halogen, light-emitting diodes and plasma arc) and their exposure modes (high-intensity and soft-start) by determination of microhardness, water sorption and solubility, and diametral tensile strength of 5 dual-curing resin cements. MATERIAL ...

Honest advertisement models posit that sexually selected traits are costly to produce, maintain or otherwise bear. Brightly coloured feathers are thought to be classic examples of these models, but evidence for a cost in feathers not coloured by carotenoid pigments is scarce. Unlike pigment-based colours, iridescent feather colours are produced ...

A novel nanocomposite photocatalyst, D201-CdS beads (0.70-0.80 mm in diameter), was fabricated for visible light (λ > 420 nm) photodegradation of Rhodamine B (RhB). Sphalerite CdS nanoparticles (5-15 nm) were distributed within the outer layer of D201 for favorable visible light permeation. Ultraviolet-visible spectral changes of RhB solution indicated that efficient RhB photodegradation ...

Here we present a new fast two-bit quantum random number generator based on the intrinsic randomness of the quantum physical phenomenon of photon statistics of coherent light source. Two-bit random numbers were generated according to the number of detected photons in each light pulse by a photon-number-resolving detector. Poissonian photon ...

Wide application of ALA-PDT for acne is limited due to relative strong side effects, such as pain and erythema. The objective of this study was to establish a protocol for ALA-PDT that would provide specific destruction of sebaceous glands at the lowest concentrations and shortest contact times of ALA. The ...

To compare curing performance of a second generation LED curing light with a high power tungsten quartz halogen (QTH). A hybrid composite resin (Filtek Z 250, 3M, USA) was used as test material and cured using a second generation LED light (Translux Power Blue™, Heraus Kulzer ,Germany) or a very ...

In this article, the design and characteristics of a micro-fadeometer is presented. The technique allows for a non-(micro-) destructive evaluation of the light fastness of colorants on various materials and can be used to directly assess valuable materials, such as heritage objects, and develop safer display strategies to promote their ...

Light polymerizable tooth colored restorative materials are most widely preferred for advantages such as esthetics, improved physical properties and operator's control over the working time. Since the introduction of these light polymerizable restorative materials, there has been a concern about the depth of appropriate cure throughout the restoration. Photopolymerization of ...

The light emission was investigated in light-emitting diodes (LEDs) constructed with n-ZnO and p-Si nanowires (NWs). ZnO NWs were synthesized by thermal chemical vapor deposition and Si NWs were formed by crystallographic wet etching of a Si wafer. The LEDs were fabricated using the NWs via dielectrophoresis (DEP) and direct ...

Abstract Light traps have been used widely to sample insect abundance and diversity, but their performance for sampling scarab beetles in tropical forests based on light source type and sampling hours throughout the night has not been evaluated. The efficiency of mercury-vapour lamps, cool white light and ultraviolet light sources ...

Shift work, which necessitates light exposure at night, is now considered a probable carcinogen. To study the effects of light on chronic diseases like cancer, methods to measure light exposure in large observational studies are needed. We aimed to investigate the validity of self-reported current light exposure. We developed a ...

Melatonin (C(13)H(16)N(2)O(2)) has a wide range of functions in the body. When is inappropriately exposed to light at night, human circadian rhythm will be interfered and then melatonin secretion will become abnormal. For nearly three decades great progresses have been achieved in analytic action spectra and melatonin suppression by various ...

Silver metal nanoparticle (NP) enhanced fluorescence is investigated in thin films of cyanobacterial Photosystem I trimer complexes (PSI) by correlating confocal laser scanning microscopy, dark-field imaging, and fluorescence lifetime measurements. PSI represents an interesting light-harvesting complex with a 20 nm diameter that is not uniformly contained within the surface-localized plasmon ...

Results of the first comprehensive light pollution survey in Hong Kong are presented. The night-sky brightness was measured and monitored around the city using a portable light-sensing device called the Sky Quality Meter over a 15-month period beginning in March 2008. A total of 1,957 data sets were taken at ...

This paper reports on the development of a blue light (VIS(BL)) dosemeter. The VIS(BL) dosemeter is based on the combination of polysulfone and phenothiazine as a potential VIS(BL) dosemeter for population studies of exposures related to the blue light hazard. This research found that this combination of photosensitive chromophores reacts ...

Phytochromes are well-known as photoactive red- and near IR-absorbing chromoproteins with cysteine-linked linear tetrapyrrole (bilin) prosthetic groups. Phytochrome photoswitching regulates adaptive responses to light in both photosynthetic and nonphotosynthetic organisms. Exclusively found in cyanobacteria, the related cyanobacteriochrome (CBCR) sensors extend the photosensory range of the phytochrome superfamily to shorter wavelengths ...