STUDY DESIGN: Nonrandomized control trial. OBJECTIVE: To determine if the variations of speed and loading conditions during trunk flexion-extension could influence the times of occurrence and disappearance of the electrical silence of the erector spinae muscles, the degrees of lumbar flexion at those instants, and the relative lumbar motion time. ...

STUDY DESIGN: Cineradiography was used to analyze continuous dynamic motion in the lumbar spine. OBJECTIVES: To identify motion patterns of the lumbar spine in asymptomatic volunteers and symptomatic patients with L4 degenerative spondylolisthesis, and to use the findings to discuss segmental instability in this disorder. SUMMARY OF BACKGROUND DATA: The ...

The aim of this study was to investigate the influence of initial resting posture on range of motion of the lumbar spine in 18 normal subjects. Subjects resting posture and active range of motion was measured using the CA-6000 Spinal Motion Analyser (OSI, USA) in five test positions, namely in ...

OBJECTIVE: To quantify errors associated with examiner-assisted neutral head placement in cervical range of motion measurements in normal subjects and to investigate the influence of these errors on range of motion measurements. DESIGN: Repeated-measures design with cervical range of motion and errors in placement measured in 20 volunteers with no ...

STUDY DESIGN: The overall, local, and segmental kinematic responses of intact human cadaver head-neck complexes undergoing an inertia-type rear-end impact were quantified. High-speed, high-resolution digital video data of individual facet joint motions during the event were statistically evaluated. OBJECTIVES: To deduce the potential for various vertebral column components to be ...

It is well known that rhythmic lateral bending of the isolated lamprey spinal cord/notochord can entrain the central pattern generator (CPG) for locomotion. During entrainment, the CPG's frequency is equal to the bending frequency. We report here that bending can also have a slowly-decaying excitatory effect on the CPG's frequency. ...

The first three parts of this series presented a standardized method of motion testing for motor behaviors specific to segmental dysfunction. When applied to clinical research studies, analysis of these palpatory data differentiated viscero-somatic from somato-somatic reflex manifestations in the thoracic region of subjects with renal dysfunction and/or hypertension. This ...

The influence of reduced anterior disc displacement on condylar motion has not been fully examined in young adults. Reduced anterior disc displacement was hypothesized to inhibit condylar motion. Using a six-degrees-of-freedom jaw-tracking system, we recorded bilateral condylar motion during maximum open-close jaw movement and gum-chewing on both sides in ten ...

STUDY DESIGN: Analytic cohort with a convenience sample in a research clinic. OBJECTIVES: To determine the influence of a spinal manipulation on trunk kinematics and associated trunk myoelectric activity. SUMMARY OF BACKGROUND: While the mechanism of spinal manipulation is unknown, it has been theorized to influence spinal range of motion ...

OBJECTIVE: To determine movements of the vertebral column of horses during normal locomotion. ANIMALS: 5 young Dutch Warmblood horses that did not have signs of back problems or lameness. PROCEDURE: Kinematics of 8 vertebrae (T6, T10, T13, T17, L1, L3, L5, and S3) and both tuber coxae were determined, using ...

STUDY DESIGN: A biomechanical and anatomic study with human cadaveric lumbar spine. OBJECTIVES: The purpose of this study is to examine the morphologic changes in the intervertebral foramen during flexion, extension, lateral bending, and axial rotation of the lumbar spine and to correlate these changes with the flexibility of the ...

Understanding the pathophysiology of equine back problems, for clinical evaluation, treatment or injury prevention, requires understanding of the normal 3-dimensional motion characteristics of the vertebral column. Recent studies have investigated regional vertebral kinematics; however, there are no reported measures of direct in vivo segmental vertebral kinematics in exercising horses. Relative ...

Most research on equine kinematics has previously been performed in the walking and/or trotting animal. This is also true for the few studies on the kinematics of the equine back. These studies have, for the major part, focused on the flexion-extension movement in the sagittal plane. However, vertebrae can rotate ...

OBJECTIVE: Improper handling of an unstable neck injury in the prehospital setting may result in iatrogenically induced neurologic injury. Due to helmet design, stabilization of the cervical spine in American football does not require routine removal of the helmet and shoulder pads prior to transport. Adequate data is not available ...

BACKGROUND: Force-displacement properties of spinal tissues assessed by blunt indentation are thought to have clinical relevance; however, numerous variables with respect to spinal indentation have yet to be identified or characterized completely. OBJECTIVE: To identify and quantify, where possible, previously unidentified or incompletely characterized variables with respect to spinal indentation. ...

STUDY DESIGN: This was a prospective pilot study to investigate the global motion characteristics of the spondylolysis and spondylolisthesis populations. OBJECTIVES: The aim of this study is to determine the influence of a spondylolisthesis or a spondylolysis on global spinal motion and to establish whether this is dependent on the ...

OBJECTIVE: To determine whether repeated motion with low magnitude joint forces, and flexion/extension moments consistently produce herniation in a non-degenerated, controlled porcine spine motion segment. DESIGN: Combined loading (flexion/extension motions and compressive forces) was applied to in vitro porcine functional spinal units. Biomechanical and radiographic characteristics were documented. BACKGROUND: While ...

OBJECTIVE: To assess the stability of the human lumbar cadaveric spinal motion segment before and after treatment with intradiscal electrothermal therapy (IDET). DESIGN: An in vitro biomechanic analysis of 5 human cadaveric spinal motion segments by using nondestructive biomechanic testing in flexion/extension, lateral bending, and axial rotation with loads of ...

The anthropometric hybrid III dummy test device is the most widely used physical model to assess the injury severity during automotive crashes. The dummy was designed to replicate the human neck in flexion and frontal impacts. Various investigators have compared the dummy neck with living human and cadaveric responses in ...

STUDY DESIGN: A repeated-measures in vitro flexibility test was performed. OBJECTIVES: To determine the biomechanical functions of tissues resected during anterior cervical decompression of various extents. SUMMARY OF BACKGROUND DATA: The biomechanical consequences of discectomy have been studied in vitro, and uncovertebral joint removal has been modeled numerically. No studies ...

Presently, there is little consensus about how, or even if, axial preload should be incorporated in spine flexibility tests in order to simulate the compressive loads naturally present in vivo. Some preload application methods are suspected of producing unwanted "artefact" forces as the specimen rotates and, in doing so, influencing ...

BACKGROUND: The curvature and range of motion of the cervical spine decrease after laminaplasty. However, to our knowledge these changes have not been studied prospectively. Also, the effect of laminaplasty on the mobility of the occipito-atlanto-axial joints has not been studied in detail. The purpose of our study was to ...

STUDY DESIGN: A biomechanical and imaging study of human cadaveric spinal motion segments. OBJECTIVE: To investigate the effect of both disc degeneration and facet joint osteoarthritis on lumbar segmental motion. SUMMARY OF BACKGROUND DATA: Spinal degeneration includes the osteoarthritic changes of the facet joint as well as disc degeneration. Disc ...

The ability of mammalian spinal cords to generate rhythmic motor patterns has been traditionally studied in hindlimb innervating segments of the spinal cord. The rhythmogenic capacity of these segments decreases substantially in the rostrocaudal direction so that the caudal lumbar segments are virtually incapable of producing the rhythm. Our recent ...

OBJECTIVE: To analyze neck kinematics and loading patterns during rear-end impacts. DESIGN: The motion of each cervical vertebra was captured using a 250 frame/s X-ray system during a whole body rear-end impact. These data were analyzed in order to understand different phases of neck loading during rear-end impact. BACKGROUND: The ...

STUDY DESIGN: An in vitro biomechanical study of lumbar spine segments. OBJECTIVE: To study the characteristics of the stiffness test protocol. SUMMARY OF BACKGROUND DATA: In an in vitro study using a flexibility protocol, forces are applied and motions are measured; no center of rotation needs to be specified. In ...

OBJECTIVE: To report instrument validity of CMS 70P, a new ultrasonography-based system for spatial kinematic analysis of the spine and its application in studying the reproducibility of cervical motion findings in healthy subjects. BACKGROUND: Reproducibility of cervical motion has been investigated using various instruments and consisting in most cases of ...

OBJECTIVE: To determine the effects of the dissection of spinal tissues on the mechanical behavior of motion segments under the application of posteroanterior forces. DESIGN: A cadaveric motion segment study. SETTING: A tissue mechanics research laboratory. PROCEDURE: Anterior shear and extension moment were applied to 10 motion segments to simulate ...

Range of motion tests are often employed in the quantification of musculoskeletal impairment and in the assessment of the efficacy of therapeutic interventions. The aim of the present study was to compare the absolute values for, and the day-to-day reliability of, measures of cervical spinal mobility made with two computerised ...

OBJECTIVE: The objective of this study was to quantify the mobility characteristics (dynamic stiffness and mechanical impedance) of the normal human thoracolumbar spine with a transient vibration analysis technique. DESIGN: This study is a prospective clinical investigation to obtain normative biomechanical data from the human male and female spine in ...

Lumbar corsets have been recommended for low back pain patients as a way of stabilizing the lumbar region, facilitating flexion movements, and reducing pain. However, little is known about how these devices affect lumbar motion. To determine the degree of changes in the lumbar region, our approach was to quantify ...

STUDY DESIGN: A systematic review and meta-analysis of studies on the putative mechanisms of action of lumbar supports in lifting activities. OBJECTIVE: To summarize the evidence bearing on the putative mechanisms of action of lumbar supports. SUMMARY OF BACKGROUND DATA: A restriction of trunk motion and a reduction in required ...

STUDY DESIGN: Motion characteristics of the lumbar spine in the sagittal plane were investigated in vivo using cineradiography. OBJECTIVES: To evaluate the differences in motion characteristics of the normal lumbar spine between forward and backward flexion. SUMMARY OF BACKGROUND DATA: Despite previous lumbar kinematic studies, differences in motion characteristics of ...

OBJECTIVE: To determine cervical coupling during the posture of lateral head translation relative to a fixed thoracic cage. DESIGN: Digitized measurements from anteroposterior cervical radiographs of 20 volunteers were obtained in neutral, left, and right lateral translation posture of the head compared to a fixed thorax. BACKGROUND DATA: Clinically, lateral ...

STUDY DESIGN: The role of bone graft force in stabilizing an instrumented cervical spine was evaluated for one-level and three-level corpectomy models using in vitro experiments. OBJECTIVES: To investigate the role of bone graft force in enhancing stability of anterior cervical plate, and to study effects of fatigue loading. SUMMARY ...

STUDY DESIGN: Mechanical testing of cadaveric lumbar motion segments. OBJECTIVES: To test the hypothesis that minor damage to a vertebral body can lead to progressive disruption of the adjacent intervertebral disc. SUMMARY OF BACKGROUND DATA: Disc degeneration involves gross structural disruption as well as cell-mediated changes in matrix composition, but ...

STUDY DESIGN: Low back kinematics, including relative lumbar and pelvic motions, were quantified during controlled lifting tasks. OBJECTIVES: To evaluate the influence of load and lifting velocity on lumbar-pelvic (LP) coordination. SUMMARY OF BACKGROUND DATA: Sagittal trunk extension is achieved through the coordinated motion of the pelvis and lumbar spine. ...

OBJECTIVE: To measure load and moment changes acting on the lumbar spine during rotatory sitting. BACKGROUND: A new chair concept generating dynamic stimuli by alternating rotations in the horizontal plane of the chair's seat was recently developed. METHODS: Load and moment changes were measured telemetrically with a spinal fixator device ...

Cervical range of motion (ROM) is evaluated in both clinical and research settings. This study's purpose was to determine if ROM data obtained with the OSI CA 6000 Spine Motion Analyser (SMA) from asymptomatic and symptomatic cervical subjects were reliable within and between testers. Cervical ROM was measured in all ...

OBJECT: The purpose of this study was to establish a cadaveric model for evaluating cervical spine motion in both the intact and injured states and to examine the efficacy of commonly used stabilization techniques in limiting that motion. METHODS: Intubation was performed in fresh human cadavers with intact cervical spines, ...

STUDY DESIGN: A cross-sectional study of spinal loading in healthy volunteers. OBJECTIVES: To measure the bending and compressive forces acting on the lumbar spine, in a range of postures, when unknown loads are delivered unexpectedly to the hands. SUMMARY OF BACKGROUND DATA: Epidemiologic studies suggest that sudden and unexpected loading ...

STUDY DESIGN: This in vivo study was performed to examine active lumbar motion without any support. OBJECTIVES: To establish the behavior of segmental flexibility according to the degree of whole lumbar motion and to clarify the correlation between bony characteristics of the lumbosacral junction and stability in the segment. SUMMARY ...

STUDY DESIGN: Mechanical testing of cadaveric motion segments. OBJECTIVES: To test the hypothesis that backward bending of the lumbar spine can reduce compressive stresses within lumbar intervertebral discs. SUMMARY OF BACKGROUND DATA: Lumbar extension affects the distribution of compressive stress inside normal cadaveric discs, but little is known about its ...

STUDY DESIGN: This study used a validity protocol. OBJECTIVE: To estimate the criterion validity of the Cervical Range of Motion goniometer using a healthy population. SUMMARY OF BACKGROUND DATA: The results of the 1994 study by Mayo et al show that there are no validated tools currently available for clinically ...

Changes in spinal length were used to evaluate a new concept for an office chair. This so-called dynamic chair imparts passive forced motion to the seated subject. The passive forced motion is a rotary movement about an axis, perpendicular to the seat with amplitude of 0.6 degrees and a frequency ...

OBJECT: Develop an analytical theory describing the dynamics of small impulses applied to vertebrae, such as in chiropractic adjustments or spinal manipulative therapy. DESIGN: Data were compared with damped harmonic oscillator models of vertebrae. BACKGROUND: Evidence accumulates that chiropractic adjustments are effective in addressing a variety of health problems. However, ...

Timing of oscillatory activity along the longitudinal body axis is critical for locomotion in the lamprey and other elongated animals. In the lamprey spinal locomotor central pattern generator (CPG), intersegmental coordination is thought to arise from the pattern of extensive connections made by propriospinal interneurons. However, the mechanisms responsible for ...

OBJECTIVE: To determine the effectiveness of the Rapid Form Cervical Vacuum Immobilizer in controlling the cervical spine movements of a football player wearing shoulder pads and a helmet. DESIGN AND SETTING: We used a 1-group, repeated-measures experimental design to radiographically assess cervical spine range of motion with and without the ...

Although often suggested as a control measure to alleviate musculoskeletal stresses, the use of mechanical assistance devices (i.e. manipulators) in load transfers has not been extensively studied. Without data describing the biomechanical effects of such devices, justification for decisions regarding implementation of such tools is difficult. An experimental study of ...

BACKGROUND: Few randomised controlled trials have sufficient power to show clear advantages of different designs of cervical-smear collection devices. We studied by systematic review whether the design of cervical-smear devices affects rates of inadequate smears and detection of disease and whether the presence of endocervical cells in the smear affects ...